Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.14968

Nitride crystalline barrier epitaxial SIS Josephson junctions by MBE

Manas Verma, Anand Ithepalli, Amit Rohan Rajapurohita, Eegene Clara Chung, David A. Garcia Wetten, Naomi A. Pieczulewski, Danqing Wang, John G. Wright, Archit Shah, Jimy Encomendero, Rishabh Singh, Chandrashekar Savant, Hangwang Yang, Anthony Hyatt, Jaehong Choi, Thomas Varghese, Kushagra Aggarwal, Paul B. Welander, Apurva Mehta, David Schuster, Valla Fatemi, Gregory D. Fuchs, Michael C. Hamilton, Hong X. Tang, David A. Muller, Huili Grace Xing, Debdeep Jena

Published Nov 11, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconductor-insulator-superconductor Josephson junctions with crystalline tunnel barriers have remained elusive by epitaxial techniques such as MOCVD or MBE that produce the junction materials and devices powering today's electronic and photonic systems like transistors and lasers. Here, we overcome the key materials hurdle to realize the first functional nitride crystalline barrier Josephson junctions by MBE. Despite an AlN barrier thickness of approximately 4.5 nm, the NbN/AlN/NbN trilayers exhibit coherent Josephson tunneling with critical current densities of approximately 17 A/cm2, an IcRn product of approximately 2.5 mV, and a superconducting gap voltage of approximately 3.7 mV with a BCS-like gap evolution with temperature. Hysteretic current-voltage characteristics and Fraunhofer current modulation with magnetic field establish underdamped SIS Josephson behavior. The realization of crystalline barrier Josephson junctions by MBE opens the doors to a richer materials palette with alloys and superlattice electrodes and tunnel barriers, as well as potential monolithic integration of superconducting quantum circuits with active electronic and photonic devices such as HEMTs and lasers.

DOI
10.48550/arxiv.2611.14968

Related papers

SuperGaN: Synthesis of NbTiN/GaN/NbTiN Tunnel Junctions

Michael E. Cyberey, Scott Hinton, Christopher W. Moore +2 more

Nb-based circuits have broad applications in quantum-limited photon detectors, low-noise parametric amplifiers, superconducting digital logic circuits, and low-loss circuits for quantum computing. The current state-of-the-art approach for superconductor-insulator-superconductor (SIS) junction material is the Gurvitch trilayer process based on magnetron sputtering of Nb electrodes with Al-Oxide or AlN tunnel barriers grown on an Al overlayer [1]. However, a current limitation of elemental Nb-based circuits is the low-loss operation of THz circuits operating above the 670 GHz gap frequency of Nb and operation at higher temperatures for projects with a strict power budget, such as space-based applications. NbTiN is an alternative higher energy gap material and we have previously reported on the first NbTiN/AlN/NbTiN superconducting-insulating-superconducting (SIS) junctions with an epitaxially grown AlN tunnel barrier [2]. One drawback of a directly grown tunnel barrier compared to thermal oxidation is control of the barrier thickness and the uniformity of thickness across a substrate, leading to variations in current density (Jc). Semiconductor barriers with smaller barrier heights enable thicker tunnel barriers for a given Jc[3]. GaN is an alternative semiconductor material with a closed-packed Wurtzite crystal structure similar to AlN and it can be epitaxially grown as a tunnel barrier using the Reactive Bias Target Ion Beam Deposition (RBTIBD) technique. This work presents the preliminary results of the first reported high-quality NbTiN/GaN/NbTiN heterojunctions with underdamped SIS I(V) characteristics

arXiv:2309.15100•IEEE Transactions on Applied Superconductivity•Nov 30, 2023•4 citations

NbN Josephson Junctions for Single-Flux-Quantum Circuits

Hiroyuki Akaike, Naoto Naito, Yuki NAGAI +1 more

We describe the fabrication processes and electrical characteristics of two types of NbN junctions. One is a self-shunted NbN/NbNx/AlN/NbN Josephson junction, which is expected to improve the density of integrated circuits; the other is an underdamped NbN/AlNx/NbN tunnel junction with radical-nitride AlNx barriers, which has highly controllable junction characteristics. In the former, the junction characteristics were changed from underdamped to overdamped by varying the thickness of the NbNx layer. Overdamped junctions with a 6-nm-thick NbNx film exhibited a characteristic voltage of Vc =0.8mV and a critical current density of Jc =22A/cm2 at 4.2K. In the junctions with radical-nitride AlNx barriers, Jc could be controlled in the range 0.01-3kA/cm2 by varying the process conditions, and good uniformity of the junction characteristics was obtained.

IEICE Transactions on Electronics•Jan 1, 2011•0 citations

Sidewall spacer passivated epitaxial NbN/AlN/NbN Josephson junctions for superconducting qubit applications

Koki Honda, Daiki Kurihara, Hiroki Kutsuma +2 more

Epitaxial NbN/AlN/NbN Josephson junctions are promising alternatives to conventional Al/AlO$_x$/Al junctions for superconducting qubits due to their crystalline tunnel barriers and the high transition temperature of NbN. However, their integration into quantum circuits typically requires complex fabrication processes involving amorphous interlayer dielectrics, which can degrade qubit coherence times. To address these issues, we developed sidewall spacer passivated epitaxial NbN/AlN/NbN junctions using a fabrication process that reduces both the volume of amorphous dielectric material and fabrication complexity. The fabricated junctions exhibited a large gap voltage of approximately 5.6 mV and low subgap leakage currents. By varying the thickness of the AlN tunnel barrier, high-quality junctions were fabricated over a wide range of critical current densities ${\it J}_c$, from 0.3 to 10$^4$ A/cm$^2$. In addition, the comparison of the current-voltage characteristics before and after buffered hydrofluoric acid treatment indicated that the wet etching process did not degrade the electrical characteristics of the junctions. These results establish a scalable fabrication process for epitaxial Josephson junctions and provide a promising platform for high-coherence nitride-based superconducting qubits.

quant-pharXiv:2610.04820•Oct 6, 2026•0 citations

Fabrication of Magnetic Barrier NbN Tunnel Junctions with the Gap Voltage over 5 mV

Ryo Terajima, Joe Sakai, Akira Kawakami +1 more

Superconductor–insulator–superconductor (SIS) tunnel junctions including magnetic barriers, with structures NbN/AlNiN/NbN or NbN/MgO/NiO/MgO/NbN, were fabricated. The junctions with upper NbN layers of good crystallinity showed a gap voltage ( V g ) higher than 5 mV. In an NbN/Al 0.942 Ni 0.058 N/NbN junction, its Josephson current I c was suppressed to approximately a third of a theoretical value under no magnetic field. Therefore, it would be possible to avoid Josephson noise in magnetic barrier junctions with a much smaller magnetic field than junctions with conventional barriers. The Ni ion area density dependence of I c suppression ratio was identical for both types of junction, suggesting that the area density of magnetic ions is the factor that determines the I c suppression ratio. On the other hand, the extents of degradation of V g and increase in leakage current caused by the increase in Ni ion area density were smaller in MgO/NiO/MgO barrier junctions than in AlNiN barrier junctions. This suggests that the proximity effect of magnetic ions was weakened owing to the separation of Ni ions and NbN layers by the inserted thin MgO layers.

Japanese Journal of Applied Physics•Mar 1, 2008•0 citations

Fabrication of High-Quality Josephson Junctions Based on Nb|Al-AlN|NbN

Artem M. Chekushkin, Lyudmila V. Filippenko, Fominskiy M. Yu. +1 more

A description of the fabrication technology of high-quality tunnel SIS junctions is presented, with following characteristics: energy gap in superconductors Vg=3.2-3.4 mV, tunnel current density up to J 35 kA/cm2, quality factor Rj/Rn (ratio of subgap resistance to normal-state resistance) up to 30, junction area up to 1 μm2. The SIS junctions are integrated into the NbTiN|SiO2|Al microstrip line. Keywords: superconducting devices, superconductor--insulator--superconductor tunnel junction, plasma etching.

Physics of the Solid State•Jan 1, 2022•1 citation

Measurement of Epitaxial NbN/AlN/NbN Tunnel Junctions With a Low Critical Current Density at Low Temperature

Wei Qiu, Hirotaka Terai, Z. Wang

Superconducting qubit circuits require high quality low critical current density Josephson tunnel junctions. We have developed high quality epitaxial NbN/AlN/NbN tunnel junctions with critical current density, Jc, ranging from as low as a few A/cm2to a few tens of kA/cm2. In this work, we measured current-voltage characteristics for junctions with a Jc~ 32 A/cm2in the temperature range from 17 mK to above 6.7 K. All the junctions are in good quality and have a high gap voltage (>; 5.5 mV). We found that the junctions' sub-gap resistances were temperature dependent above 2.5 K and saturated at temperatures below 2.5 K. A junction sub-gap leakage current Irof about 23 pA was measured. The voltage noise power spectral density for 3 junctions with different sizes has been measured at the base temperature of 17 mK with the junctions biased above the gap voltage. The spectral densities clearly show 1/fbehavior at low frequency and are proportional to the junction's linear dimension.

IEEE Transactions on Applied Superconductivity•Nov 10, 2010•5 citations
Superconductor-insulator-superconductor Josephson junctions with crystalline tunnel barriers have remained elusive by epitaxial techniques such as MOCVD or MBE that produce the junction materials and devices powering today's electronic and photonic systems like transistors and lasers. Here, we overcome the key materials hurdle to realize the first functional nitride crystalline barrier Josephson junctions by MBE. Despite an AlN barrier thickness of approximately 4.5 nm, the NbN/AlN/NbN trilayers exhibit coherent Josephson tunneling with critical current densities of approximately 17 A/cm2, an IcRn product of approximately 2.5 mV, and a superconducting gap voltage of approximately 3.7 mV with a BCS-like gap evolution with temperature. Hysteretic current-voltage characteristics and Fraunhofer current modulation with magnetic field establish underdamped SIS Josephson behavior. The realization of crystalline barrier Josephson junctions by MBE opens the doors to a richer materials palette with alloys and superlattice electrodes and tunnel barriers, as well as potential monolithic integration of superconducting quantum circuits with active electronic and photonic devices such as HEMTs and lasers.
Nb-based circuits have broad applications in quantum-limited photon detectors, low-noise parametric amplifiers, superconducting digital logic circuits, and low-loss circuits for quantum computing. The current state-of-the-art approach for superconductor-insulator-superconductor (SIS) junction material is the Gurvitch trilayer process based on magnetron sputtering of Nb electrodes with Al-Oxide or AlN tunnel barriers grown on an Al overlayer [1]. However, a current limitation of elemental Nb-based circuits is the low-loss operation of THz circuits operating above the 670 GHz gap frequency of Nb and operation at higher temperatures for projects with a strict power budget, such as space-based applications. NbTiN is an alternative higher energy gap material and we have previously reported on the first NbTiN/AlN/NbTiN superconducting-insulating-superconducting (SIS) junctions with an epitaxially grown AlN tunnel barrier [2]. One drawback of a directly grown tunnel barrier compared to thermal oxidation is control of the barrier thickness and the uniformity of thickness across a substrate, leading to variations in current density (Jc). Semiconductor barriers with smaller barrier heights enable thicker tunnel barriers for a given Jc[3]. GaN is an alternative semiconductor material with a closed-packed Wurtzite crystal structure similar to AlN and it can be epitaxially grown as a tunnel barrier using the Reactive Bias Target Ion Beam Deposition (RBTIBD) technique. This work presents the preliminary results of the first reported high-quality NbTiN/GaN/NbTiN heterojunctions with underdamped SIS I(V) characteristics
We describe the fabrication processes and electrical characteristics of two types of NbN junctions. One is a self-shunted NbN/NbNx/AlN/NbN Josephson junction, which is expected to improve the density of integrated circuits; the other is an underdamped NbN/AlNx/NbN tunnel junction with radical-nitride AlNx barriers, which has highly controllable junction characteristics. In the former, the junction characteristics were changed from underdamped to overdamped by varying the thickness of the NbNx layer. Overdamped junctions with a 6-nm-thick NbNx film exhibited a characteristic voltage of Vc =0.8mV and a critical current density of Jc =22A/cm2 at 4.2K. In the junctions with radical-nitride AlNx barriers, Jc could be controlled in the range 0.01-3kA/cm2 by varying the process conditions, and good uniformity of the junction characteristics was obtained.
Epitaxial NbN/AlN/NbN Josephson junctions are promising alternatives to conventional Al/AlOx_xx​/Al junctions for superconducting qubits due to their crystalline tunnel barriers and the high transition temperature of NbN. However, their integration into quantum circuits typically requires complex fabrication processes involving amorphous interlayer dielectrics, which can degrade qubit coherence times. To address these issues, we developed sidewall spacer passivated epitaxial NbN/AlN/NbN junctions using a fabrication process that reduces both the volume of amorphous dielectric material and fabrication complexity. The fabricated junctions exhibited a large gap voltage of approximately 5.6 mV and low subgap leakage currents. By varying the thickness of the AlN tunnel barrier, high-quality junctions were fabricated over a wide range of critical current densities Jc{\it J}_cJc​, from 0.3 to 104^44 A/cm2^22. In addition, the comparison of the current-voltage characteristics before and after buffered hydrofluoric acid treatment indicated that the wet etching process did not degrade the electrical characteristics of the junctions. These results establish a scalable fabrication process for epitaxial Josephson junctions and provide a promising platform for high-coherence nitride-based superconducting qubits.
Superconductor–insulator–superconductor (SIS) tunnel junctions including magnetic barriers, with structures NbN/AlNiN/NbN or NbN/MgO/NiO/MgO/NbN, were fabricated. The junctions with upper NbN layers of good crystallinity showed a gap voltage ( V g ) higher than 5 mV. In an NbN/Al 0.942 Ni 0.058 N/NbN junction, its Josephson current I c was suppressed to approximately a third of a theoretical value under no magnetic field. Therefore, it would be possible to avoid Josephson noise in magnetic barrier junctions with a much smaller magnetic field than junctions with conventional barriers. The Ni ion area density dependence of I c suppression ratio was identical for both types of junction, suggesting that the area density of magnetic ions is the factor that determines the I c suppression ratio. On the other hand, the extents of degradation of V g and increase in leakage current caused by the increase in Ni ion area density were smaller in MgO/NiO/MgO barrier junctions than in AlNiN barrier junctions. This suggests that the proximity effect of magnetic ions was weakened owing to the separation of Ni ions and NbN layers by the inserted thin MgO layers.
A description of the fabrication technology of high-quality tunnel SIS junctions is presented, with following characteristics: energy gap in superconductors Vg=3.2-3.4 mV, tunnel current density up to J 35 kA/cm2, quality factor Rj/Rn (ratio of subgap resistance to normal-state resistance) up to 30, junction area up to 1 μm2. The SIS junctions are integrated into the NbTiN|SiO2|Al microstrip line. Keywords: superconducting devices, superconductor--insulator--superconductor tunnel junction, plasma etching.
Superconducting qubit circuits require high quality low critical current density Josephson tunnel junctions. We have developed high quality epitaxial NbN/AlN/NbN tunnel junctions with critical current density, Jc, ranging from as low as a few A/cm2to a few tens of kA/cm2. In this work, we measured current-voltage characteristics for junctions with a Jc~ 32 A/cm2in the temperature range from 17 mK to above 6.7 K. All the junctions are in good quality and have a high gap voltage (>; 5.5 mV). We found that the junctions' sub-gap resistances were temperature dependent above 2.5 K and saturated at temperatures below 2.5 K. A junction sub-gap leakage current Irof about 23 pA was measured. The voltage noise power spectral density for 3 junctions with different sizes has been measured at the base temperature of 17 mK with the junctions biased above the gap voltage. The spectral densities clearly show 1/fbehavior at low frequency and are proportional to the junction's linear dimension.