This review analyzes theoretical calculations and laboratory experiments showing the prospects of using of diamond with color centers as active laser medium. Despite the mentioned prospects, practical implementation of lasers based on color centers in diamond is limited to laboratory demonstrations. No commercially significant products of laser technology based on diamond with color centers have been created yet. Obviously, the available scientific information is still insufficient, and additional research is required. The review analyzes the factors that require further study: concentration quenching of luminescence, thermal quenching of luminescence, luminescence quenching by nitrogen and other impurity defects, as well as the influence of multiphoton and multi-stage absorption processes. For color centers in diamond, such processes have yet to be investigated in more detail.
This review analyzes theoretical calculations and laboratory experiments showing the prospects of using of diamond with color centers as active laser medium. Despite the mentioned prospects, practical implementation of lasers based on color centers in diamond is limited to laboratory demonstrations. No commercially significant products of laser technology based on diamond with color centers have been created yet. Obviously, the available scientific information is still insufficient, and additional research is required. The review analyzes the factors that require further study: concentration quenching of luminescence, thermal quenching of luminescence, luminescence quenching by nitrogen and other impurity defects, as well as the influence of multiphoton and multi-stage absorption processes. For color centers in diamond, such processes have yet to be investigated in more detail.
As a non-classical light source, single-photon source plays an essential role in the foundation of quantum physics and has been attracting a lot of attention of researchers over the world. Up to now, among different kinds of single-photon sources, single color centers in the diamond are very outstanding for the stable emission at room temperature as well as the spin controllability at ambient environment. Those color centers in the diamond with excellent properties are usually formed by impurity atoms and lattice vacancies. Nowadays, complex environments are necessary to the preparation of color centers generally. This restricts the research and applications of those color centers to a certain extent. Therefore, to develop efficient and high-precision fabrication methods of single color centers in the diamond at ambient environment is a need. On this condition, femtosecond (fs) laser process, a mature micro-nano processing technology, have been demonstrated to be a feasible, efficient, and fast production of the color centers in the diamond. This review discusses the state of the art in the preparation of single color centers in diamond and their applications in different areas.
The silicon vacancy (SiV) color centers in diamond have significant potential in the fields of quantum information, nanophotonics, bioimaging and sensing, due to its good structural stability at room temperature, strong photostability, short luminescence lifetime, narrow zero-phonon line bandwidth, and avoidance of biological autofluorescence. They have attracted extensive attention and in-depth research from researchers. The applications of SiV color centers in the above areas require addressing key issues such as control over the number and charge state of SiV color centers in diamond, as well as improving the luminous efficiency. Therefore, this review summarizes some recent relevant research progress, including common methods for preparing SiV color centers, control over their luminescence intensity, preparation of SiV single-photon sources, and research on the control of SiV color center charge states. Based on these, an outlook is provided for the preparation and application of SiV color centers in diamond.
Abstract Color centers, optically active defects within solids, are vital for leading quantum information technologies such as quantum computing and quantum sensing. An essential prerequisite for realizing scalable quantum architectures is the ability to create quantum emitters deterministically. In the last decades, significant efforts have been devoted to selectively generating color centers. One of the most used methods is high‐energy ion implantation. However, this method usually causes extended lattice damage along the entire trajectory because of ions bombardment. Moreover, the position depth of color centers is also limited by the ions penetrate length in crystals. The direct laser‐writing (DLW) technique has recently emerged as a powerful tool to create color centers in solid‐state materials. It can define color centers at arbitrary depths inside the substrate and operate at the ambient environment, therefore, providing a feasible 3D fabrication method for integrated quantum photonics. Here, recent advancements of laser writing of color centers in solid‐state materials are reviewed, from bulk crystals, such as diamond and silicon carbide, to nanostructures, involving single‐walled carbon nanotubes, 2D layered materials, and quantum dots.
Nitrogen-vacancy (NV) color centers in diamond have emerged as a focal point in quantum technology research due to their exceptional optical and electronic spin properties. This discovery not only expands our understanding of the material properties of diamond but also paves the way for practical applications in quantum technology. As a solid-state spin quantum system characterized by long electron spin coherence times and stable performance, NV color centers offer distinct advantages in quantum information processing. Recent advancements have enabled the fabrication of high-quality NV color centers with controllable concentration and spatial positioning through techniques such as in situ doping, ion implantation, and hybrid approaches. These technological breakthroughs have significantly enhanced the efficiency of NV center fabrication, thereby establishing a robust foundation for their widespread application in quantum sensing and quantum information technologies. This review provides a comprehensive introduction to the structure and fundamental properties of NV color centers in diamond, an in-depth analysis of recent progress in their fabrication techniques, and a critical discussion of their current applications in quantum science and technology. Additionally, the challenges, open questions, and future research directions in NV color center studies are addressed.
In this paper, a brief overview of the main characteristics of lasers at NV centers in diamond is carried out. Currently, lasers at NV centers in a negative charge state generate pulsed laser radiation in the range of 714-720 nanometers with a duration of units of nanoseconds with a pulse energy of tens of microjoules and an efficiency of several percent. A significant increase in the efficiency and energy characteristics of NV lasers can be achieved through the use of multilayer reflective coatings on the faces of crystals as resonator mirrors. Lasers of this class have good prospects in the field of obtaining femtosecond pulses, since NV centers have a wide luminescence contour. Due to the high thermal conductivity of the diamond, they are able to provide generation with a high level of average power. To increase the pulse duration and transition to continuous generation, it is necessary to pump with a high level of average power. A possible solution would be injection pumping. This requires the creation of efficient light-emitting diamond electroconductive structures. In addition, the article presents new data on the study of spectral characteristics of the superluminescence of the NV centers of a diamond laser when the crystal is heated from 100 to 300 K. It is shown that the superluminescence band of such lasers actually consists of two spectral components that are not resolved at room temperature. The temperature behavior of these components is fundamentally different: the short-wave component practically does not change in intensity, while the long-wave component exponentially increases in intensity to 220 K, and then saturates and further decreases according to Mott's law. In addition, it was found that the maxima of these components experience a shift in the long-wavelength direction by about 6 meV when the temperature changes from 100 to 300 K. In the future, it is necessary to find out the exact nature and physical mechanisms of the detected phenomena, as well as to find their possible practical applications. The authors declare no conflicts of interests.