Abstract Color centers, optically active defects within solids, are vital for leading quantum information technologies such as quantum computing and quantum sensing. An essential prerequisite for realizing scalable quantum architectures is the ability to create quantum emitters deterministically. In the last decades, significant efforts have been devoted to selectively generating color centers. One of the most used methods is high‐energy ion implantation. However, this method usually causes extended lattice damage along the entire trajectory because of ions bombardment. Moreover, the position depth of color centers is also limited by the ions penetrate length in crystals. The direct laser‐writing (DLW) technique has recently emerged as a powerful tool to create color centers in solid‐state materials. It can define color centers at arbitrary depths inside the substrate and operate at the ambient environment, therefore, providing a feasible 3D fabrication method for integrated quantum photonics. Here, recent advancements of laser writing of color centers in solid‐state materials are reviewed, from bulk crystals, such as diamond and silicon carbide, to nanostructures, involving single‐walled carbon nanotubes, 2D layered materials, and quantum dots.
Abstract Color centers, optically active defects within solids, are vital for leading quantum information technologies such as quantum computing and quantum sensing. An essential prerequisite for realizing scalable quantum architectures is the ability to create quantum emitters deterministically. In the last decades, significant efforts have been devoted to selectively generating color centers. One of the most used methods is high‐energy ion implantation. However, this method usually causes extended lattice damage along the entire trajectory because of ions bombardment. Moreover, the position depth of color centers is also limited by the ions penetrate length in crystals. The direct laser‐writing (DLW) technique has recently emerged as a powerful tool to create color centers in solid‐state materials. It can define color centers at arbitrary depths inside the substrate and operate at the ambient environment, therefore, providing a feasible 3D fabrication method for integrated quantum photonics. Here, recent advancements of laser writing of color centers in solid‐state materials are reviewed, from bulk crystals, such as diamond and silicon carbide, to nanostructures, involving single‐walled carbon nanotubes, 2D layered materials, and quantum dots.
Abstract Color centers in diamond, silicon carbide, and related materials have recently emerged as one of the most promising platforms for quantum technology applications. These optically active point defects in the crystal lattice demonstrate outstanding optical and spin properties at room and even higher temperatures, which can hardly be achieved using other quantum systems. For a long time, the host material was considered only as a mechanical carrier of color centers, and the fact that it is a semiconductor and, therefore, can contain high densities of electrons and holes, was ignored. However, recent studies have demonstrated that color centers can exchange electrons and holes with the valence or conduction bands of the host material, which enables novel functionalities, ranging from ultrabright electrically driven single‐photon sources to protected quantum memories. This review summarizes recent advances in understanding this interaction.
Integrated photonic circuits promise to be foundational for applications in quantum information and sensing technologies, through their ability to confine and manipulate light. A key role in such technologies may be played by spin-active quantum emitters, which can be used to store quantum information or as sensitive probes of the local environment. A leading candidate is the negatively charged nitrogen vacancy (NV−) diamond color center, whose ground spin state can be optically read out, exhibiting long (≈1 ms) coherence times at room temperature. These properties have driven research toward the integration of photonic circuits in the bulk of diamond with the development of techniques allowing fabrication of optical waveguides. In particular, femtosecond laser writing has emerged as a powerful technique, capable of writing light guiding structures with 3D configurations as well as creating NV complexes. In this Perspective, the physical mechanisms behind laser fabrication in diamond will be reviewed. The properties of waveguides, single- and ensemble-NV centers, will be analyzed, together with the possibility to combine such structures in integrated photonic devices, which can find direct application in quantum information and sensing.
Color centers in diamond have widespread utility in quantum technologies, but their creation process remains stochastic in nature. Deterministic creation of color centers in device-ready diamond platforms can improve the yield, scalability, and integration. Recent work using pulsed laser excitation has shown impressive progress in deterministically creating defects in bulk diamond. Here, we extend this laser-writing process into nanophotonic devices etched into diamond membranes, including nanopillars and photonic resonators with writing and subsequent readout occurring in situ at cryogenic temperatures. We demonstrate the optically driven creation of carbon vacancy (GR1) and nitrogen vacancy (NV) centers in diamond nanopillars and observe enhanced photoluminescence collection from them. We also fabricate bullseye resonators and leverage their cavity modes to locally amplify the laser-writing field, yielding defect creation with picojoule write-pulse energies 100 times lower than those typically used in bulk diamond demonstrations.
ABSTRACT Quantum computing leverages the principles of quantum mechanics to perform computations that are infeasible for classical computers. Color centers, which are point defects in a crystal lattice where vacancies in the lattice and/or an impurity atom replace a host atom, exhibit unique optical, electronic, and nuclear spin properties that make them suitable for quantum information and communication processing as well as for quantum computations with quantum memory. Among the color centers, nitrogen‐vacancy centers in diamond, the most developed, silicon vacancy (V Si ) centers in silicon carbide (SiC), and boron vacancy (V B ) centers in hexagonal boron nitride (hBN) have emerged as leading candidates. Diamond and SiC material hosts are particularly promising due to the long spin and photon coherence times, optical addressability, compatibility with various quantum operations, while SiC promises higher compatibility with scalable industrial fabrication processing, and 2D materials are better suited for hybrid photonics and electronics integration. This paper provides a detailed overview of the advantages, challenges, and recent advancements in using these color centers for quantum computing. In addition, it discusses other potential color centers of interest, such as silicon (SiV) and germanium (GeV) vacancies in diamond, tin vacancies (SnV) in diamond, chromium and nickel centers in diamond, and rare‐earth ions in host materials like yttrium orthosilicate and calcium fluoride. By understanding and utilizing the properties of these diverse color centers, researchers aim to develop more efficient, scalable, and versatile quantum computers, which could lead to hybrid quantum‐classical systems that combine the strengths of different platforms and potentially transform fields like cryptography, material science, drug discovery, and complex system simulations (climate modeling, fusion energy).
Solid-state color-center spin defects provide a versatile platform for quantum sensing with applications ranging from nanoscale magnetometry to thermometry and electrometry. This review surveys recent progress in nitrogen-vacancy centers in diamond and defect spins in silicon carbide (SiC), with emphasis on their material properties, fabrication strategies, and coherence engineering. Key defect creation and optimization techniques, including ion implantation, femtosecond laser writing, focused ion beam nanofabrication, isotopic engineering, and surface passivation, are discussed in the context of improving spin coherence and optical performance. Fundamental quantum measurement protocols, optically detected magnetic resonance, Rabi oscillations, Ramsey interferometry, and spin echo, are reviewed as a hierarchical framework for characterizing spin control, dephasing, and intrinsic coherence. The review further highlights microscale sensing architectures and examines the growing role of machine learning in pulse optimization, adaptive estimation, and data-driven imaging. Finally, current challenges and future directions are outlined, focusing on scalability, environmental robustness, and autonomous operation. Together, these developments position diamond and SiC color centers as leading platforms for next-generation solid-state quantum sensors.
Split-vacancy color centers in diamonds are promising solid-state platforms for the implementation of photonic quantum technologies. These luminescent defects are commonly fabricated upon low-energy ion implantation and subsequent thermal annealing. Their technological uptake will require the availability of reliable methods for the controlled, large-scale production of localized individual photon emitters. This task is partially achieved by controlled ion implantation to introduce selected impurities in the host material and requires the development of challenging beam focusing or collimation procedures coupled with single-ion detection techniques. We report on the protocol for the direct optical activation of split-vacancy color centers in diamond via localized processing with a continuous-wave laser at mW optical powers. We demonstrate the activation of photoluminescent Mg- and Sn-related centers at both the ensemble and single-photon emitter levels in ion-implanted, high-purity diamond crystals without further thermal processing. The proposed lithographic method enables the activation of individual color centers at specific positions of a large-area sample by means of a relatively inexpensive equipment offering real-time, in situ monitoring of the process.