The field of cavity optomechanics is based on the coupling of optical cavities to mechanical degrees of freedom. Over the past two decades, it has led to remarkable and surprising discoveries. A cavity optomechanical system enabled the first observation of gravitational waves, a discovery awarded with the 2017 Nobel prize, confirming Einstein's 100-year-old prediction. It was also a cavity optomechanical system that has for the first time enabled ground state cooling of the motion of an object containing ~1012 atoms, and entanglement of mechanical oscillators of similar size. Moreover, cavity optomechanical systems have facilitated significant progress in precision-sensing technologies, with diverse applications such as biosensing, magnetometry, and many more.But this may only be the beginning. The field is still in its early days and experimental capabilities are improving fast. For instance, cavity optomechanical systems have the potential to test predicted signatures of quantum gravity such as modifications to the canonical commutator, short-distance modifications to Newtonian gravity, dark matter and dark energy, and even extra dimensions. In this sense, they form an economical platform with a short experimental turnover time, that can compete in its predictive power with mega-scale, multi-billion-dollar experiments such as the Large Hadron Collider.This thesis is dedicated to utilizing cavity optomechanics to explore the maybe most challenging and unexplored frontier in quantum mechanics: The dynamics of macroscopic quantum systems. Quantum physics, since its discovery in the early 20th century, has revolutionized our understanding of the microworld, but has long been thought to apply exclusively to extremely small objects. However, over the past decades, ever-larger quantum systems have emerged in laboratories around the world. On one hand, these are collective, macroscopic quantum phenomena such as superfluidity, superconductivity, and Bose-Einstein condensation. On the other hand, they are quantum states of relatively massive mechanical objects. While our understanding of the interplay of quantum mechanical and classical systems has greatly improved over the past decades, as described by theories of decoherence and open quantum systems, many basic questions about macroscopic quantum systems still remain unanswered. Quantum fluids such as Bose-Einstein condensates and superfluid helium are inherently hard to understand due to their complex dynamics, and difficult to probe experimentally due to the weakness of their interactions with the environment and their fragile nature. This is especially true in the strongly-interacting regime, which is, for instance, found in superfluid helium.Another long-standing, unanswered set of questions in quantum mechanics is related to the quantum measurement problem. What constitutes a quantum measurement? What happens if we engineer a quantum state that is large enough to be, in principle, part of our everyday world? What if we attempt to create a quantum superposition of a living being? Do the laws of physics even permit either of these scenarios?Cavity optomechanics is a unique and powerful platform to investigate macroscopic quantum systems. The extreme sensitivity of cavity optomechanical sensors in readout of mechanical motion makes them susceptible to minute quantum effects. The strong coupling between single photons and phonons in these systems allows engineering and measurement of quantum states of mechanical systems. Furthermore, most cavity optomechanical experiments are cryo-compatible and small in size, which allows integration with other quantum systems to be analyzed, such as superfluid helium.
The field of cavity optomechanics is based on the coupling of optical cavities to mechanical degrees of freedom. Over the past two decades, it has led to remarkable and surprising discoveries. A cavity optomechanical system enabled the first observation of gravitational waves, a discovery awarded with the 2017 Nobel prize, confirming Einstein's 100-year-old prediction. It was also a cavity optomechanical system that has for the first time enabled ground state cooling of the motion of an object containing ~1012 atoms, and entanglement of mechanical oscillators of similar size. Moreover, cavity optomechanical systems have facilitated significant progress in precision-sensing technologies, with diverse applications such as biosensing, magnetometry, and many more.But this may only be the beginning. The field is still in its early days and experimental capabilities are improving fast. For instance, cavity optomechanical systems have the potential to test predicted signatures of quantum gravity such as modifications to the canonical commutator, short-distance modifications to Newtonian gravity, dark matter and dark energy, and even extra dimensions. In this sense, they form an economical platform with a short experimental turnover time, that can compete in its predictive power with mega-scale, multi-billion-dollar experiments such as the Large Hadron Collider.This thesis is dedicated to utilizing cavity optomechanics to explore the maybe most challenging and unexplored frontier in quantum mechanics: The dynamics of macroscopic quantum systems. Quantum physics, since its discovery in the early 20th century, has revolutionized our understanding of the microworld, but has long been thought to apply exclusively to extremely small objects. However, over the past decades, ever-larger quantum systems have emerged in laboratories around the world. On one hand, these are collective, macroscopic quantum phenomena such as superfluidity, superconductivity, and Bose-Einstein condensation. On the other hand, they are quantum states of relatively massive mechanical objects. While our understanding of the interplay of quantum mechanical and classical systems has greatly improved over the past decades, as described by theories of decoherence and open quantum systems, many basic questions about macroscopic quantum systems still remain unanswered. Quantum fluids such as Bose-Einstein condensates and superfluid helium are inherently hard to understand due to their complex dynamics, and difficult to probe experimentally due to the weakness of their interactions with the environment and their fragile nature. This is especially true in the strongly-interacting regime, which is, for instance, found in superfluid helium.Another long-standing, unanswered set of questions in quantum mechanics is related to the quantum measurement problem. What constitutes a quantum measurement? What happens if we engineer a quantum state that is large enough to be, in principle, part of our everyday world? What if we attempt to create a quantum superposition of a living being? Do the laws of physics even permit either of these scenarios?Cavity optomechanics is a unique and powerful platform to investigate macroscopic quantum systems. The extreme sensitivity of cavity optomechanical sensors in readout of mechanical motion makes them susceptible to minute quantum effects. The strong coupling between single photons and phonons in these systems allows engineering and measurement of quantum states of mechanical systems. Furthermore, most cavity optomechanical experiments are cryo-compatible and small in size, which allows integration with other quantum systems to be analyzed, such as superfluid helium.
Cavity optomechanics represents a frontier research direction in quantum science and technology, centered on the control and exploration of interactions between electromagnetic fields and mechanical motion. Rooted in quantum mechanics, this field realizes efficient coupling and precise manipulation of optical fields and mechanical vibrations through the structural design and precise regulation of optical microcavities and mechanical oscillators, thereby revealing and harnessing novel quantum phenomena. In recent years, cavity optomechanics has evolved into an interdisciplinary frontier integrating quantum optics, condensed matter physics, and quantum precision measurement, exhibiting profound application in both fundamental physics research and quantum information science. With advancements in technologies such as nanomanufacturing and laser cooling, optomechanical interactions have been successfully demonstrated in various experimental systems. Among these platforms, cavity cold-atom systems stand out as one of the ideal platforms for implementing quantum optomechanics. Featuring exceptional environmental isolation, long quantum coherence times, and strong light-matter interaction, these systems provide a crucial testbed for exploring strong and even ultrastrong optomechanical coupling effects as well as rich nonlinear quantum phenomena. This paper reviews the recent progress in optomechanical control and manipulation based on cavity cold-atom systems. We first outline the fundamental principles of standard cavity optomechanical systems. Then, we describe the experimental realization of linear and nonlinear optomechanical couplings in cold-atom systems. After that, we focus on the representative applications of this platform in high-precision quantum sensing, quantum memory, and the preparation of macroscopic nonclassical states. Finally, we give an outlook and challenges in this field.
Quantum sensing, leveraging the principles of quantum mechanics, has revolutionized the field of precision measurement by achieving sensitivities beyond the classical limits. Among the various platforms for quantum sensing, cavity optomechanics has emerged as a particularly promising field. It studies the interaction between light and mechanical resonators within high-Q optical cavities, providing unique opportunities for enhancing measurement precision and sensitivity in quantum sensing. With advancements in technology, the range of applications for cavity optomechanics in quantum sensing is expanding rapidly. Particularly, the integration of optoelectronic technologies and miniaturization techniques holds promise for the development of more compact, efficient, and scalable quantum sensors. Quantum sensing with cavity optomechanics has been extensively studied and has progressed enormously over the past decades. This paper provides a systematic review of research on quantum sensing with cavity optomechanics, starting from the fundamental principles of optomechanical coupling, to the achievement of quantum ground-state cooling of mechanical oscillators and the preparation of basic quantum states, and then to the mechanisms of quantum sensing based on cavity optomechanics. Furthermore, we survey recent advancements in quantum sensing utilizing cavity optomechanics, including the enhancement of optomechanical sensing through the use of entanglement, squeezing, and quantum exceptional points. Finally, perspectives and opportunities for future developments of this field are provided.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
Cavity optomechanics has become an established and equally promising branch in quantum optics. Thanks to the interaction between matter and electromagnetic radiation, it has proved to be an optimal platform for a range of scopes, from weak force sensing to the study of non-classicality of mechanical motion. Besides, the capability to isolate genuine quantum features of the interaction represents a test ground to address many important questions regarding decoherence, quantum-to-classical transitions and the interface between quantum mechanics and gravity. The first part of the research embedded in this thesis is addressed towards the clear identification and characterisation of quantum features in optomechanics. The main model we will refer to is a deformable Fabry-P\'erot cavity where one of the two mirrors moves under the radiation pressure of light. After having properly assessed the quantum peculiarities of the system, and also having revised some intakes from past literature, we will focus on the study of mechanical non-linearities, as they have been proved to be a key resource to bring out and enhance quantum properties. These investigations provide the basis to eventually propose a method to deterministically prepare and measure macroscopic quantum superposition states of the movable mirror. Such massive quantum states play a key role to inspect the foundations of physics, e.g. to test the collapse of the wave function and phenomenological models of quantum gravity, as well as to develop new enhanced quantum technologies.
An exciting scientific goal, common to many fields of research, is the development of ever-larger physical systems operating in the quantum regime. Relevant to this dissertation is the objective of preparing and observing a mechanical object in its motional quantum ground state. In order to sense the object's zero-point motion, the probe itself must have quantum-limited sensitivity. Cavity optomechanics, the interactions between light and a mechanical object inside an optical cavity, provides an elegant means to achieve the quantum regime. In this dissertation, I provide context to the successful cavity-based optical detection of the quantum-ground-state motion of atoms-based mechanical elements; mechanical elements, consisting of the collective center-of-mass (CM) motion of ultracold atomic ensembles and prepared inside a high-finesse Fabry-P'erot cavity, were dispersively probed with an average intracavity photon number as small as 0.1. I first show that cavity optomechanics emerges from the theory of cavity quantum electrodynamics when one takes into account the CM motion of one or many atoms within the cavity, and provide a simple theoretical framework to model optomechanical interactions. I then outline details regarding the apparatus and the experimental methods employed, highlighting certain fundamental aspects of optical detection along the way. Finally, I describe background information, both theoretical and experimental, to two published results on quantum cavity optomechanics that form the backbone of this dissertation. The first publication shows the observation of zero-point collective motion of several thousand atoms and quantum-limited measurement backaction on that observed motion. The second publication demonstrates that an array of near-ground-state collective atomic oscillators can be simultaneously prepared and probed, and that the motional state of one oscillator can be selectively addressed while preserving the near-zero-point motion of neighboring oscillators.
In the classic Chinese novel Journey to the West, the Monkey King has a special power that enables him to be in two or more places simultaneously. Normally, an amazing thing such as this could never happen in real life. However, in the quantum world, where the motions of objects obey the rules of quantum mechanics, this could happen. These weird quantum rules usually only apply in the microscopic world to atoms and molecules, because quantum properties are generally very fragile in the macroscopic world. However, scientists have recently been making efforts to push macroscopic and mesoscopic mechanical systems into the quantum world, i.e. they are putting conventional mechanical systems into the quantum mechanical regime. Spring oscillators, swings, and pendulum clocks are typical mechanical systems that we often see in daily lives, and they can be described by a basic physical model: the harmonic oscillator. In the quantum regime, harmonic oscillators have some quantum properties, including discrete energy spectra and zero-point motion. To observe these quantum properties, the environmental thermal noise must be suppressed so that the energy of the quantum motion dominates over the energy of the thermal motion. To this end, a generic model of a cavity optomechanical system is used, as shown in Fig. 1. The system consists of an optical cavity with a fixed mirror and a movable mirror, where the latter is attached to a spring and undergoes harmonic oscillation. A laser beam is launched into the cavity and is reflected multiple times between the two mirrors, and the cavity field thus builds up, resulting in a greatly enhanced optical field, which then exerts a considerable force on the movable mirror. The interaction between the optical field and the mechanical motion can reduce the thermal motion noise to enable the fragile quantum properties to be observed. The study of such systems has produced an emerging field called cavity optomechanics [1–3]. The pioneering work was conducted by Braginsky and co-workers in the 1960s [4]. In recent years, various experimental systems have been proposed and investigated, including Fabry–Pérot cavities [by groups including MIT/Caltech LIGO Laboratory, the Mavalvala group at MIT, the Aspelmeyer group at the University of Vienna, the Heidmann group at the University of Pierre and Marie Curie, and the Bouwmeester group at the University of California, Santa Barbara (UCSB)], whispering-gallery cavities (by groups including the Vahala group at Caltech, the Kippenberg group at École Polytechnique Fédérale de Lausanne, the Wang group at the University of Oregon, the Lipson group at Cornell University, the Carmon group at the University of Michigan, the Bowen group at the University of Queensland, and the Xiao group at Peking University), photonic crystal cavities (by groups including the Painter group at Caltech, the Wong group at Columbia University, and the Tang group at Yale University), separated mechanical oscillators inside or near a cavity (by groups including the Harris group at Yale University, the Regal group at Joint Institute for Laboratory Astrophysics (JILA), the Favero group at Paris Diderot University, and the Weig group at the University of Munich), superconducting circuits (by groups including the Schwab group at Caltech, the Lehnert group at JILA, the Cleland group at UCSB, and the Teufel group at National Institute of Science and Technology, Boulder), and cold atoms (by groups including the Kimble group at Caltech, the Stamper-Kurn group at the University of California, Berkeley, and the Treutlein group at the University of Basel). Illustration of a generic cavity optomechanical system. The left mirror is fixed and the right mirror is attached to a spring. Cavity optomechanics has been featured as the most recent milestone in photon history in Nature. The research in cavity optomechanics is important to both fundamental physics studies and the applied sciences. First, cavity optomechanics provides a unique platform for the study of fundamental quantum physics, including macroscopic quantum phenomena, decoherence, and quantum–classical transitions. The field offers the best test bed to study effects like gravity-induced decoherence, which is important to the understanding of macroscopic quantum phenomena. Second, cavity optomechanics is promising for high-precision measurements of small forces, masses, displacements, and accelerations, and is considered to be capable of surpassing the standard quantum limit. Third, cavity optomechanics provides resources for both classical and quantum information processing. For instance, optomechanical devices can serve as information storage devices and act as interfaces between light beams with different wavelengths or even microwaves. In the last few years, researchers have made considerable efforts to put mechanical systems into their quantum ground states [5]. Recent efforts have demonstrated optomechanically induced transparency [6], normal-mode splitting [7], quantum-coherent coupling [8], wavelength conversion [9], and measurements performed below the standard quantum limit [10]. Future developments will aim to integrate different quantum systems to form hybrid quantum devices, e.g. hybrid optomechanical and electromechanical systems. In this way, we can enable phonons, photons, and electrons to work together in the quantum world. Recent years have seen rapidly growing interest in the field of cavity optomechanics. As shown in Fig. 2, the publications and citations in this field have grown exponentially. The now booming development in this field will turn the dream of manipulating macroscopic mechanical systems in a quantum manner into reality. Numbers of publications (a) and citations (b) per year in the period from 2005 to 2013 with the keyword ‘cavity optomechanics’, retrieved from the Web of Science.