Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

National Science Review

Macroscopic mechanical systems are entering the quantum world

Yong‐Chun Liu, Yun‐Feng Xiao

Published Aug 20, 2014• 7 citations
Publisher

Abstract

In the classic Chinese novel Journey to the West, the Monkey King has a special power that enables him to be in two or more places simultaneously. Normally, an amazing thing such as this could never happen in real life. However, in the quantum world, where the motions of objects obey the rules of quantum mechanics, this could happen. These weird quantum rules usually only apply in the microscopic world to atoms and molecules, because quantum properties are generally very fragile in the macroscopic world. However, scientists have recently been making efforts to push macroscopic and mesoscopic mechanical systems into the quantum world, i.e. they are putting conventional mechanical systems into the quantum mechanical regime. Spring oscillators, swings, and pendulum clocks are typical mechanical systems that we often see in daily lives, and they can be described by a basic physical model: the harmonic oscillator. In the quantum regime, harmonic oscillators have some quantum properties, including discrete energy spectra and zero-point motion. To observe these quantum properties, the environmental thermal noise must be suppressed so that the energy of the quantum motion dominates over the energy of the thermal motion. To this end, a generic model of a cavity optomechanical system is used, as shown in Fig. 1. The system consists of an optical cavity with a fixed mirror and a movable mirror, where the latter is attached to a spring and undergoes harmonic oscillation. A laser beam is launched into the cavity and is reflected multiple times between the two mirrors, and the cavity field thus builds up, resulting in a greatly enhanced optical field, which then exerts a considerable force on the movable mirror. The interaction between the optical field and the mechanical motion can reduce the thermal motion noise to enable the fragile quantum properties to be observed. The study of such systems has produced an emerging field called cavity optomechanics [1–3]. The pioneering work was conducted by Braginsky and co-workers in the 1960s [4]. In recent years, various experimental systems have been proposed and investigated, including Fabry–Pérot cavities [by groups including MIT/Caltech LIGO Laboratory, the Mavalvala group at MIT, the Aspelmeyer group at the University of Vienna, the Heidmann group at the University of Pierre and Marie Curie, and the Bouwmeester group at the University of California, Santa Barbara (UCSB)], whispering-gallery cavities (by groups including the Vahala group at Caltech, the Kippenberg group at École Polytechnique Fédérale de Lausanne, the Wang group at the University of Oregon, the Lipson group at Cornell University, the Carmon group at the University of Michigan, the Bowen group at the University of Queensland, and the Xiao group at Peking University), photonic crystal cavities (by groups including the Painter group at Caltech, the Wong group at Columbia University, and the Tang group at Yale University), separated mechanical oscillators inside or near a cavity (by groups including the Harris group at Yale University, the Regal group at Joint Institute for Laboratory Astrophysics (JILA), the Favero group at Paris Diderot University, and the Weig group at the University of Munich), superconducting circuits (by groups including the Schwab group at Caltech, the Lehnert group at JILA, the Cleland group at UCSB, and the Teufel group at National Institute of Science and Technology, Boulder), and cold atoms (by groups including the Kimble group at Caltech, the Stamper-Kurn group at the University of California, Berkeley, and the Treutlein group at the University of Basel). Illustration of a generic cavity optomechanical system. The left mirror is fixed and the right mirror is attached to a spring. Cavity optomechanics has been featured as the most recent milestone in photon history in Nature. The research in cavity optomechanics is important to both fundamental physics studies and the applied sciences. First, cavity optomechanics provides a unique platform for the study of fundamental quantum physics, including macroscopic quantum phenomena, decoherence, and quantum–classical transitions. The field offers the best test bed to study effects like gravity-induced decoherence, which is important to the understanding of macroscopic quantum phenomena. Second, cavity optomechanics is promising for high-precision measurements of small forces, masses, displacements, and accelerations, and is considered to be capable of surpassing the standard quantum limit. Third, cavity optomechanics provides resources for both classical and quantum information processing. For instance, optomechanical devices can serve as information storage devices and act as interfaces between light beams with different wavelengths or even microwaves. In the last few years, researchers have made considerable efforts to put mechanical systems into their quantum ground states [5]. Recent efforts have demonstrated optomechanically induced transparency [6], normal-mode splitting [7], quantum-coherent coupling [8], wavelength conversion [9], and measurements performed below the standard quantum limit [10]. Future developments will aim to integrate different quantum systems to form hybrid quantum devices, e.g. hybrid optomechanical and electromechanical systems. In this way, we can enable phonons, photons, and electrons to work together in the quantum world. Recent years have seen rapidly growing interest in the field of cavity optomechanics. As shown in Fig. 2, the publications and citations in this field have grown exponentially. The now booming development in this field will turn the dream of manipulating macroscopic mechanical systems in a quantum manner into reality. Numbers of publications (a) and citations (b) per year in the period from 2005 to 2013 with the keyword ‘cavity optomechanics’, retrieved from the Web of Science.

DOI
10.1093/nsr/nwu050

Related papers

Probing quantum macroscopicity with cavity optomechanics

Stefan Forstner

The field of cavity optomechanics is based on the coupling of optical cavities to mechanical degrees of freedom. Over the past two decades, it has led to remarkable and surprising discoveries. A cavity optomechanical system enabled the first observation of gravitational waves, a discovery awarded with the 2017 Nobel prize, confirming Einstein's 100-year-old prediction. It was also a cavity optomechanical system that has for the first time enabled ground state cooling of the motion of an object containing ~1012 atoms, and entanglement of mechanical oscillators of similar size. Moreover, cavity optomechanical systems have facilitated significant progress in precision-sensing technologies, with diverse applications such as biosensing, magnetometry, and many more.But this may only be the beginning. The field is still in its early days and experimental capabilities are improving fast. For instance, cavity optomechanical systems have the potential to test predicted signatures of quantum gravity such as modifications to the canonical commutator, short-distance modifications to Newtonian gravity, dark matter and dark energy, and even extra dimensions. In this sense, they form an economical platform with a short experimental turnover time, that can compete in its predictive power with mega-scale, multi-billion-dollar experiments such as the Large Hadron Collider.This thesis is dedicated to utilizing cavity optomechanics to explore the maybe most challenging and unexplored frontier in quantum mechanics: The dynamics of macroscopic quantum systems. Quantum physics, since its discovery in the early 20th century, has revolutionized our understanding of the microworld, but has long been thought to apply exclusively to extremely small objects. However, over the past decades, ever-larger quantum systems have emerged in laboratories around the world. On one hand, these are collective, macroscopic quantum phenomena such as superfluidity, superconductivity, and Bose-Einstein condensation. On the other hand, they are quantum states of relatively massive mechanical objects. While our understanding of the interplay of quantum mechanical and classical systems has greatly improved over the past decades, as described by theories of decoherence and open quantum systems, many basic questions about macroscopic quantum systems still remain unanswered. Quantum fluids such as Bose-Einstein condensates and superfluid helium are inherently hard to understand due to their complex dynamics, and difficult to probe experimentally due to the weakness of their interactions with the environment and their fragile nature. This is especially true in the strongly-interacting regime, which is, for instance, found in superfluid helium.Another long-standing, unanswered set of questions in quantum mechanics is related to the quantum measurement problem. What constitutes a quantum measurement? What happens if we engineer a quantum state that is large enough to be, in principle, part of our everyday world? What if we attempt to create a quantum superposition of a living being? Do the laws of physics even permit either of these scenarios?Cavity optomechanics is a unique and powerful platform to investigate macroscopic quantum systems. The extreme sensitivity of cavity optomechanical sensors in readout of mechanical motion makes them susceptible to minute quantum effects. The strong coupling between single photons and phonons in these systems allows engineering and measurement of quantum states of mechanical systems. Furthermore, most cavity optomechanical experiments are cryo-compatible and small in size, which allows integration with other quantum systems to be analyzed, such as superfluid helium.

•Feb 17, 2021•0 citations

Introduction

A. O. Caldeira

Since its very beginning, quantum mechanics has been developed to deal with systems on the atomic or sub-atomic scale. For many decades, there has been no reason to think about its application to macroscopic systems. Actually, macroscopic objects have even been used to show how bizarre quantum effects would appear if quantum mechanics were applied beyond its original realm. This is, for example, the essence of the so-called Schrödinger cat paradox (Schrödinger, 1935). How-ever, due to recent advances in the design of systems on the meso- and nanoscopic scales, as well as in cryogenic techniques, this situation has changed drastically. It is now quite natural to ask whether a specific quantum effect, collectively involving a macroscopic number of particles, could occur in these systems.

Cambridge University Press eBooks•Mar 20, 2014•0 citations

Quantum optomechanics at room temperature

H. Schütz

Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity $\sim\!10^4$ times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.

•Jan 1, 2017•0 citations

Bose-condensed optomechanical-like system and a Fabry–Perot cavity with one movable mirror: quantum correlations from the perspectives of quantum optics

Nasir Alam, Kishore Thapliyal, Anirban Pathak +3 more

The European Physical Journal D•Jul 1, 2019•18 citations

Quantum Optical Control of Micromechanics

Markus Aspelmeyer

Massive mechanical resonators are now approaching the quantum regime [1]. This opens up not only a spectrum of new applications but also a previously inaccessible parameter range for macroscopic quantum experiments on systems consisting of up to 1020 atoms.

Bulletin of the American Physical Society•Mar 20, 2009•0 citations

Mekaanisen liikkeen mittauksia ja sovelluksia kvanttimekaanisella rajalla

Erno Damskägg

Microscopic systems exhibit many intriguing quantum mechanical phenomena which cannot be explained by classical physics. Quantum mechanics has succesfully explained the behaviour of subatomic particles, atoms, and electromagnetic waves where entanglement, wave-particle duality and superposition of particles has been observed. In macroscopic scales, quantum mechanics explains the microscopic origin of electronic properties of solids, and quantum coherence effects are routinely observed in superfluids and superconductors. However, most macroscopic objects behave according to the laws of classical physics due to decoherence effects caused by interaction with the environment. Mechanical systems are ideal for studying quantum behavior of macroscopic objects as they can be measured with high accuracy, and their interaction with the environment can be controlled. Cavity optomechanics studies the interaction between light and mechanical objects through radiation pressure force. Recent developments in the field have made it possible to study quantum behaviour in macroscopic mechanical objects. For example, mechanical oscillators coupled to either microwave or optical light have been cooled to their quantum ground state. This thesis studies a cavity optomechanical system in which micromechanical aluminium membrane resonator is coupled to a superconducting microwave circuit resonator. This work focuses on the phenomena relating to the Heisenberg's uncertainty principle which sets a fundamental limit to the precision in which certain pairs of properties of a system can be measured. Due to uncertainty principle, even if a harmonic oscillator is cooled to the ground state, it still has random motion called the zero-point motion. This sets a fundamental limit on how accurately one can measure the motion of the resonator. In a squeezed quantum state, fluctuations of a quantity can be reduced below this quantum limit, at the cost of increased fluctuations in the pair variable. In this work, motion of a nearly macroscopic object is measured in a squeezed state. Due to uncertainty principle, a measurement amplifying an oscillatory signal always adds noise. However, when information in one part of the signal is lost, one can amplify and measure the other part perfectly. This kind of nearly noiseless phase-sensitive measurement, and squeezing of microwave fields is demonstrated in this work. An optomechanical device that simultaneously performs high-gain amplification and frequency conversion is created. Collective dynamics of a multimode optomechanical system is studied. When measuring the oscillator position continuously, the system is perturbed by the measuring. This can be avoided in quantum back-action evading measurement, which is demonstrated for collective motion of two mechanical resonators. Finally, an entanglement of centre-of-mass motion of two nearly macroscopic objects is created and stabilised.

•Jan 1, 2018•0 citations
In the classic Chinese novel Journey to the West, the Monkey King has a special power that enables him to be in two or more places simultaneously. Normally, an amazing thing such as this could never happen in real life. However, in the quantum world, where the motions of objects obey the rules of quantum mechanics, this could happen. These weird quantum rules usually only apply in the microscopic world to atoms and molecules, because quantum properties are generally very fragile in the macroscopic world. However, scientists have recently been making efforts to push macroscopic and mesoscopic mechanical systems into the quantum world, i.e. they are putting conventional mechanical systems into the quantum mechanical regime. Spring oscillators, swings, and pendulum clocks are typical mechanical systems that we often see in daily lives, and they can be described by a basic physical model: the harmonic oscillator. In the quantum regime, harmonic oscillators have some quantum properties, including discrete energy spectra and zero-point motion. To observe these quantum properties, the environmental thermal noise must be suppressed so that the energy of the quantum motion dominates over the energy of the thermal motion. To this end, a generic model of a cavity optomechanical system is used, as shown in Fig. 1. The system consists of an optical cavity with a fixed mirror and a movable mirror, where the latter is attached to a spring and undergoes harmonic oscillation. A laser beam is launched into the cavity and is reflected multiple times between the two mirrors, and the cavity field thus builds up, resulting in a greatly enhanced optical field, which then exerts a considerable force on the movable mirror. The interaction between the optical field and the mechanical motion can reduce the thermal motion noise to enable the fragile quantum properties to be observed. The study of such systems has produced an emerging field called cavity optomechanics [1–3]. The pioneering work was conducted by Braginsky and co-workers in the 1960s [4]. In recent years, various experimental systems have been proposed and investigated, including Fabry–Pérot cavities [by groups including MIT/Caltech LIGO Laboratory, the Mavalvala group at MIT, the Aspelmeyer group at the University of Vienna, the Heidmann group at the University of Pierre and Marie Curie, and the Bouwmeester group at the University of California, Santa Barbara (UCSB)], whispering-gallery cavities (by groups including the Vahala group at Caltech, the Kippenberg group at École Polytechnique Fédérale de Lausanne, the Wang group at the University of Oregon, the Lipson group at Cornell University, the Carmon group at the University of Michigan, the Bowen group at the University of Queensland, and the Xiao group at Peking University), photonic crystal cavities (by groups including the Painter group at Caltech, the Wong group at Columbia University, and the Tang group at Yale University), separated mechanical oscillators inside or near a cavity (by groups including the Harris group at Yale University, the Regal group at Joint Institute for Laboratory Astrophysics (JILA), the Favero group at Paris Diderot University, and the Weig group at the University of Munich), superconducting circuits (by groups including the Schwab group at Caltech, the Lehnert group at JILA, the Cleland group at UCSB, and the Teufel group at National Institute of Science and Technology, Boulder), and cold atoms (by groups including the Kimble group at Caltech, the Stamper-Kurn group at the University of California, Berkeley, and the Treutlein group at the University of Basel). Illustration of a generic cavity optomechanical system. The left mirror is fixed and the right mirror is attached to a spring. Cavity optomechanics has been featured as the most recent milestone in photon history in Nature. The research in cavity optomechanics is important to both fundamental physics studies and the applied sciences. First, cavity optomechanics provides a unique platform for the study of fundamental quantum physics, including macroscopic quantum phenomena, decoherence, and quantum–classical transitions. The field offers the best test bed to study effects like gravity-induced decoherence, which is important to the understanding of macroscopic quantum phenomena. Second, cavity optomechanics is promising for high-precision measurements of small forces, masses, displacements, and accelerations, and is considered to be capable of surpassing the standard quantum limit. Third, cavity optomechanics provides resources for both classical and quantum information processing. For instance, optomechanical devices can serve as information storage devices and act as interfaces between light beams with different wavelengths or even microwaves. In the last few years, researchers have made considerable efforts to put mechanical systems into their quantum ground states [5]. Recent efforts have demonstrated optomechanically induced transparency [6], normal-mode splitting [7], quantum-coherent coupling [8], wavelength conversion [9], and measurements performed below the standard quantum limit [10]. Future developments will aim to integrate different quantum systems to form hybrid quantum devices, e.g. hybrid optomechanical and electromechanical systems. In this way, we can enable phonons, photons, and electrons to work together in the quantum world. Recent years have seen rapidly growing interest in the field of cavity optomechanics. As shown in Fig. 2, the publications and citations in this field have grown exponentially. The now booming development in this field will turn the dream of manipulating macroscopic mechanical systems in a quantum manner into reality. Numbers of publications (a) and citations (b) per year in the period from 2005 to 2013 with the keyword ‘cavity optomechanics’, retrieved from the Web of Science.
The field of cavity optomechanics is based on the coupling of optical cavities to mechanical degrees of freedom. Over the past two decades, it has led to remarkable and surprising discoveries. A cavity optomechanical system enabled the first observation of gravitational waves, a discovery awarded with the 2017 Nobel prize, confirming Einstein's 100-year-old prediction. It was also a cavity optomechanical system that has for the first time enabled ground state cooling of the motion of an object containing ~1012 atoms, and entanglement of mechanical oscillators of similar size. Moreover, cavity optomechanical systems have facilitated significant progress in precision-sensing technologies, with diverse applications such as biosensing, magnetometry, and many more.But this may only be the beginning. The field is still in its early days and experimental capabilities are improving fast. For instance, cavity optomechanical systems have the potential to test predicted signatures of quantum gravity such as modifications to the canonical commutator, short-distance modifications to Newtonian gravity, dark matter and dark energy, and even extra dimensions. In this sense, they form an economical platform with a short experimental turnover time, that can compete in its predictive power with mega-scale, multi-billion-dollar experiments such as the Large Hadron Collider.This thesis is dedicated to utilizing cavity optomechanics to explore the maybe most challenging and unexplored frontier in quantum mechanics: The dynamics of macroscopic quantum systems. Quantum physics, since its discovery in the early 20th century, has revolutionized our understanding of the microworld, but has long been thought to apply exclusively to extremely small objects. However, over the past decades, ever-larger quantum systems have emerged in laboratories around the world. On one hand, these are collective, macroscopic quantum phenomena such as superfluidity, superconductivity, and Bose-Einstein condensation. On the other hand, they are quantum states of relatively massive mechanical objects. While our understanding of the interplay of quantum mechanical and classical systems has greatly improved over the past decades, as described by theories of decoherence and open quantum systems, many basic questions about macroscopic quantum systems still remain unanswered. Quantum fluids such as Bose-Einstein condensates and superfluid helium are inherently hard to understand due to their complex dynamics, and difficult to probe experimentally due to the weakness of their interactions with the environment and their fragile nature. This is especially true in the strongly-interacting regime, which is, for instance, found in superfluid helium.Another long-standing, unanswered set of questions in quantum mechanics is related to the quantum measurement problem. What constitutes a quantum measurement? What happens if we engineer a quantum state that is large enough to be, in principle, part of our everyday world? What if we attempt to create a quantum superposition of a living being? Do the laws of physics even permit either of these scenarios?Cavity optomechanics is a unique and powerful platform to investigate macroscopic quantum systems. The extreme sensitivity of cavity optomechanical sensors in readout of mechanical motion makes them susceptible to minute quantum effects. The strong coupling between single photons and phonons in these systems allows engineering and measurement of quantum states of mechanical systems. Furthermore, most cavity optomechanical experiments are cryo-compatible and small in size, which allows integration with other quantum systems to be analyzed, such as superfluid helium.
Since its very beginning, quantum mechanics has been developed to deal with systems on the atomic or sub-atomic scale. For many decades, there has been no reason to think about its application to macroscopic systems. Actually, macroscopic objects have even been used to show how bizarre quantum effects would appear if quantum mechanics were applied beyond its original realm. This is, for example, the essence of the so-called Schrödinger cat paradox (Schrödinger, 1935). How-ever, due to recent advances in the design of systems on the meso- and nanoscopic scales, as well as in cryogenic techniques, this situation has changed drastically. It is now quite natural to ask whether a specific quantum effect, collectively involving a macroscopic number of particles, could occur in these systems.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼ ⁣104\sim\!10^4∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
Microscopic systems exhibit many intriguing quantum mechanical phenomena which cannot be explained by classical physics. Quantum mechanics has succesfully explained the behaviour of subatomic particles, atoms, and electromagnetic waves where entanglement, wave-particle duality and superposition of particles has been observed. In macroscopic scales, quantum mechanics explains the microscopic origin of electronic properties of solids, and quantum coherence effects are routinely observed in superfluids and superconductors. However, most macroscopic objects behave according to the laws of classical physics due to decoherence effects caused by interaction with the environment. Mechanical systems are ideal for studying quantum behavior of macroscopic objects as they can be measured with high accuracy, and their interaction with the environment can be controlled. Cavity optomechanics studies the interaction between light and mechanical objects through radiation pressure force. Recent developments in the field have made it possible to study quantum behaviour in macroscopic mechanical objects. For example, mechanical oscillators coupled to either microwave or optical light have been cooled to their quantum ground state. This thesis studies a cavity optomechanical system in which micromechanical aluminium membrane resonator is coupled to a superconducting microwave circuit resonator. This work focuses on the phenomena relating to the Heisenberg's uncertainty principle which sets a fundamental limit to the precision in which certain pairs of properties of a system can be measured. Due to uncertainty principle, even if a harmonic oscillator is cooled to the ground state, it still has random motion called the zero-point motion. This sets a fundamental limit on how accurately one can measure the motion of the resonator. In a squeezed quantum state, fluctuations of a quantity can be reduced below this quantum limit, at the cost of increased fluctuations in the pair variable. In this work, motion of a nearly macroscopic object is measured in a squeezed state. Due to uncertainty principle, a measurement amplifying an oscillatory signal always adds noise. However, when information in one part of the signal is lost, one can amplify and measure the other part perfectly. This kind of nearly noiseless phase-sensitive measurement, and squeezing of microwave fields is demonstrated in this work. An optomechanical device that simultaneously performs high-gain amplification and frequency conversion is created. Collective dynamics of a multimode optomechanical system is studied. When measuring the oscillator position continuously, the system is perturbed by the measuring. This can be avoided in quantum back-action evading measurement, which is demonstrated for collective motion of two mechanical resonators. Finally, an entanglement of centre-of-mass motion of two nearly macroscopic objects is created and stabilised.