Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)

Superconducting NbN Hot Electron Bolometer with an Nb5N6 Buffer Layer

Daogang Sun, Hongkai Shi, Runfeng Su, Tao Xu, Xuecou Tu, Xiaoqing Jia, Lin Kang, Jian Chen, Peiheng Wu

Published Nov 8, 2020• 1 citation
Publisher

Abstract

In this paper, the superconducting NbN hot electron bolometer terahertz detector with an Nb5N6buffer layer was fabricated on the Si substrate. The Nb5N6buffer layer can significantly improve the superconductivity of ultra-thin NbN films. Preliminary results show that with a 30-nm-thick buffer, the zero resistance superconducting transition temperature of a 6-nm-thick NbN film device is 12.6 K, and the superconducting critical current of the device is increased by four times. The noise temperature, IF bandwidth and direct detection sensitivity of the device will be further characterized in following experiments.

DOI
10.1109/irmmw-thz46771.2020.9370776

Related papers

The Performance of Superconducting NbN Hot Electron Bolometer with Nb5N6 Buffer Layer

Hongkai Shi, Daogang Sun, Runfeng Su +6 more

Superconducting hot electron bolometer (HEB) were fabricated with Nb5N6buffered NbN on Si substrate. We present the result that the Nb5N6buffer layer can significantly improve the superconductivity of NbN HEB. The 2.5–5 THz superconducting HEB device has been fabricated successfully. We also do some research on devices which work at varied temperature. It is shown that our buffered HEB device could work at relatively high temperature, which means more possibility of applications in the future.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Aug 29, 2021•1 citation

Technology and Performance of THz Hot-Electron Bolometer Mixers

K. Ilin, Axel Stockhausen, A. Scheuring +4 more

Hot-electron bolometer (HEB) mixers are a complex multi-layer thin film structure containing an ultra-thin superconducting film of NbN as a detecting element and a thick normal metal layer as an antenna structure. We have optimized the fabrication process starting with ultra-thin NbN films, Au films for antenna structures and their patterning using e-beam lithography and lift-off. The coupling between normal conducting antenna and NbN detector has been improved by introducing an intermediate NbN film to reduce proximity suppression of superconductivity in the detecting element. A critical temperature of about 9.5 K is reached for NbN films with a thickness between 5 nm and 6 nm. A twofold increase of the film thickness increases the critical temperature to 12 K. We have shown that a 20 nm thick buffer layer of NbN under a much thicker Au layer is sufficient to ensure a critical temperature of the bi-layer of 9 K. This value is close to the critical temperature of 5.5 nm thick HEB devices. The noise temperature of HEB mixer made using improved technology is about 800 K and was measured in a liquid cryogen free system with a quantum cascade laser as 2.5 THz local oscillator.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•8 citations

Nb5N6 Buffered Superconducting NbN Nanowire Single-Photon Detector on Si Substrate

Tao Xu, Xiaoqing Jia, Shi Chen +8 more

Superconducting nanowire single photon detectors (SNSPDs) based on Si substrates have demonstrated excellent performance, such as high efficiency, low dark count rate, short reset time and low timing jitter. But due to the lattice mismatch between NbN and Si substrate, the performance of film is limited. To this end, Nb5N6layer is fabricated as the buffer layer between the NbN film and Si substrate, and that will reduce the mismatch and optimize superconducting properties of NbN films. The 6nm-thick film with a 65 nm-thick buffer layer shows the zero resistance critical temperature (Tc0) of 13.27 K, which is 5 K higher than that without buffer. Based on the NbN film on the buffered substrate, we fabricated SNSPD devices demonstrate critical current (IC) of 65 μA which is 5 ~ 6 times higher to the detectors without buffer. Besides, the experiment results prove that the buffer layer reduces the kinetic inductance, which fasten the recovery of nanowire.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•1 citation

Fabrication of 3 THz Quasi-Optical NbN Hot Electron Bolometer Mixers

Akira KAWAKAMI, Yoshihisa Irimajiri, Shukichi Tanaka +2 more

Hot electron bolometer mixers (HEBM) are expected to be used as low-noise heterodyne mixers in the terahertz frequency range. We are developing quasi-optical HEBMs for applications such as atmospheric remote sensing and radio astronomy in the terahertz frequency range. Therefore, we developed a fabrication method using niobium nitride (NbN) ultrathin films deposited on a silicone (Si) substrate for terahertz applications. First, a magnesium oxide buffer layer 50 nm thick was deposited on a Si substrate at approximately 525 °C. After deposition of this layer, NbN ultrathin films were deposited at ambient temperature. Using the buffer layers, we found the transition temperature of the 3.5-nm-thick NbN thin films to be approximately 10 K. The same method was applied to fabricate NbN-HEBMs on a Si substrate. The fabricated quasi-optical mixers were designed to operate at 3.1 THz. The receiver noise temperature was found to be approximately 1930 K (DSB) at 3.1 THz.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2014•0 citations

Fabrication and characterization of hot-electron bolometers for THz applications

Michael Frommberger, Philippe Sabon, Matthias Schicke +2 more

Superconducting properties of Nb and NbN thin films for application in diffusion and phonon cooled Hot-Electron Bolometers have been systematically investigated. The materials were sputtered on fused quartz substrates in a wide thickness range. DC-measurements of the Nb films allow us to predict the intermediate frequency bandwidth of a hot-electron bolometer mixer device for a given design. To improve the characteristics of the NbN thin films, we used a 15 nm MgO seed layer.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•6 citations

Ultrathin NbN Films for Superconducting Single-Photon Detectors

Wojciech Słysz, M. Guziewicz, Michal Adam Borysiewicz +11 more

We present our research on fabrication and structural and transport characterization of ultrathin superconducting NbN layers deposited on both single-crystal Al2O3 and Si wafers, and SiO2 and Si3N4 buffer layers grown directly on Si wafers.The thicknesses of our films varied from 6 nm to 50 nm and they were grown using reactive RF magnetron sputtering on substrates maintained at the temperature 850 • C. We have performed extensive morphology characterization of our films using the X-ray diffraction method and atomic force microscopy, and related the results to the type of the substrate used for the film deposition.Our transport measurements showed that even the thinnest, 6 nm thick NbN films had the superconducting critical temperature of 10-12 K, which was increased to 14 K for thicker films.

Acta Physica Polonica A•Jul 1, 2011•14 citations
In this paper, the superconducting NbN hot electron bolometer terahertz detector with an Nb5N6buffer layer was fabricated on the Si substrate. The Nb5N6buffer layer can significantly improve the superconductivity of ultra-thin NbN films. Preliminary results show that with a 30-nm-thick buffer, the zero resistance superconducting transition temperature of a 6-nm-thick NbN film device is 12.6 K, and the superconducting critical current of the device is increased by four times. The noise temperature, IF bandwidth and direct detection sensitivity of the device will be further characterized in following experiments.
Hot-electron bolometer (HEB) mixers are a complex multi-layer thin film structure containing an ultra-thin superconducting film of NbN as a detecting element and a thick normal metal layer as an antenna structure. We have optimized the fabrication process starting with ultra-thin NbN films, Au films for antenna structures and their patterning using e-beam lithography and lift-off. The coupling between normal conducting antenna and NbN detector has been improved by introducing an intermediate NbN film to reduce proximity suppression of superconductivity in the detecting element. A critical temperature of about 9.5 K is reached for NbN films with a thickness between 5 nm and 6 nm. A twofold increase of the film thickness increases the critical temperature to 12 K. We have shown that a 20 nm thick buffer layer of NbN under a much thicker Au layer is sufficient to ensure a critical temperature of the bi-layer of 9 K. This value is close to the critical temperature of 5.5 nm thick HEB devices. The noise temperature of HEB mixer made using improved technology is about 800 K and was measured in a liquid cryogen free system with a quantum cascade laser as 2.5 THz local oscillator.
Superconducting nanowire single photon detectors (SNSPDs) based on Si substrates have demonstrated excellent performance, such as high efficiency, low dark count rate, short reset time and low timing jitter. But due to the lattice mismatch between NbN and Si substrate, the performance of film is limited. To this end, Nb5N6layer is fabricated as the buffer layer between the NbN film and Si substrate, and that will reduce the mismatch and optimize superconducting properties of NbN films. The 6nm-thick film with a 65 nm-thick buffer layer shows the zero resistance critical temperature (Tc0) of 13.27 K, which is 5 K higher than that without buffer. Based on the NbN film on the buffered substrate, we fabricated SNSPD devices demonstrate critical current (IC) of 65 μA which is 5 ~ 6 times higher to the detectors without buffer. Besides, the experiment results prove that the buffer layer reduces the kinetic inductance, which fasten the recovery of nanowire.
Hot electron bolometer mixers (HEBM) are expected to be used as low-noise heterodyne mixers in the terahertz frequency range. We are developing quasi-optical HEBMs for applications such as atmospheric remote sensing and radio astronomy in the terahertz frequency range. Therefore, we developed a fabrication method using niobium nitride (NbN) ultrathin films deposited on a silicone (Si) substrate for terahertz applications. First, a magnesium oxide buffer layer 50 nm thick was deposited on a Si substrate at approximately 525 °C. After deposition of this layer, NbN ultrathin films were deposited at ambient temperature. Using the buffer layers, we found the transition temperature of the 3.5-nm-thick NbN thin films to be approximately 10 K. The same method was applied to fabricate NbN-HEBMs on a Si substrate. The fabricated quasi-optical mixers were designed to operate at 3.1 THz. The receiver noise temperature was found to be approximately 1930 K (DSB) at 3.1 THz.
We present our research on fabrication and structural and transport characterization of ultrathin superconducting NbN layers deposited on both single-crystal Al2O3 and Si wafers, and SiO2 and Si3N4 buffer layers grown directly on Si wafers.The thicknesses of our films varied from 6 nm to 50 nm and they were grown using reactive RF magnetron sputtering on substrates maintained at the temperature 850 • C. We have performed extensive morphology characterization of our films using the X-ray diffraction method and atomic force microscopy, and related the results to the type of the substrate used for the film deposition.Our transport measurements showed that even the thinnest, 6 nm thick NbN films had the superconducting critical temperature of 10-12 K, which was increased to 14 K for thicker films.