Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Technology and Performance of THz Hot-Electron Bolometer Mixers

K. Ilin, Axel Stockhausen, A. Scheuring, M. Siegel, Alexei D. Semenov, Heiko Richter, Heinz‐Wilhelm Hübers

Published Jun 1, 2009• 8 citations
Publisher

Abstract

Hot-electron bolometer (HEB) mixers are a complex multi-layer thin film structure containing an ultra-thin superconducting film of NbN as a detecting element and a thick normal metal layer as an antenna structure. We have optimized the fabrication process starting with ultra-thin NbN films, Au films for antenna structures and their patterning using e-beam lithography and lift-off. The coupling between normal conducting antenna and NbN detector has been improved by introducing an intermediate NbN film to reduce proximity suppression of superconductivity in the detecting element. A critical temperature of about 9.5 K is reached for NbN films with a thickness between 5 nm and 6 nm. A twofold increase of the film thickness increases the critical temperature to 12 K. We have shown that a 20 nm thick buffer layer of NbN under a much thicker Au layer is sufficient to ensure a critical temperature of the bi-layer of 9 K. This value is close to the critical temperature of 5.5 nm thick HEB devices. The noise temperature of HEB mixer made using improved technology is about 800 K and was measured in a liquid cryogen free system with a quantum cascade laser as 2.5 THz local oscillator.

DOI
10.1109/tasc.2009.2018266

Related papers

Hot-electron bolometer mixers for terahertz radiation

K. Ilin, Alexei D. Semenov, Heinz‐Wilhelm Hübers +1 more

Hot-electron bolometer (HEB) mixers are used in many low noise heterodyne radio astronomical receivers. Their noise temperature is at the level of 10–15 times the quantum limit, and their gain bandwidth is from 2 GHz to slightly more than 5 GHz depending on the type of substrate material used for a device fabrication. The HEB mixers presented in this Letter are a complex multilayer thin-film structure containing an ultra-thin superconducting film of NbN as a detecting element, and a thick normal metal layer as an antenna structure. The overall performance of the device has been improved by optimisation of the HEB mixer fabrication steps starting with ultra-thin NbN films, followed by NbN/Au bi-layers for antenna structures. Patterning was achieved using electron-beam lithography and lift-off processes. The noise temperature of the HEB mixer fabricated with the improved technology is about 800 K, as measured in a cryogenic-free system with a quantum cascade laser as a local oscillator.

Electronics Letters•Dec 23, 2010•1 citation

Terahertz Superconducting Hot Electron Bolometer Heterodyne Receivers

J. R. Gao, Merlijn Hajenius, Zhenyu Yang +4 more

We highlight the progress on NbN hot electron bolometer (HEB) mixers achieved through fruitful collaboration between SRON Netherlands Institute for Space Research and Delft University of Technology, the Netherlands. This includes the best receiver noise temperatures of 700 K at 1.63 THz using a twin-slot antenna mixer and 1050 K at 2.84 THz using a spiral antenna coupled HEB mixer. The mixers are based on thin NbN films on Si and fabricated with a new contact-process and-structure. By reducing their areas HEB mixers have shown an LO power requirement as low as 30 nW. Those small HEB mixers have demonstrated equivalent sensitivity as those with large areas provided the direct detection effect due to broadband radiation is removed. To manifest that a HEB based heterodyne receiver can in practice be used at arbitrary frequencies above 2 THz, we demonstrate a 2.8 THz receiver using a THz quantum cascade laser (QCL) as local oscillator.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•29 citations

NbN Hot Electron Bolometric Mixers for a Quasi--Optical THz Receiver

M. Kroug

Experimental work on the development of a quasi-optical heterodyne receiver for the THz frequency range is reported. The mixing device is a superconducting hot electron bolometer (HEB) made from ultrathin, d = 3 - 5 nm, niobium nitride (NbN) films. Work described in this thesis comprises: The design of a prototype receiver using quasi-optical coupling. Device fabrication involving reactive magnetron sputtering of NbN films and lithographic definition of the antenna integrated mixer. An investigation of the receiver performance at frequencies between 0.6 THz and 2.5 THz. The best performance is obtained with HEB mixers made from NbN films with a thickness d = 3-3.5 nm and a critical temperature T c = 9 - 9.5 K. Double-side band receiver noise temperatures are 530 K at 0.6 THz, 650 K at 1.6 THz and 1100 K at 2.5 THz. Corrected for losses in the receiver input optics, these values amount to only 10 times the theoretical quantum limit. MgO as the substrate material has been shown to provide improved acoustic coupling between NbN film and the substrate compared to other materials such as Si or sapphire. A maximum IF gain bandwidth of 4.5 GHz has been measured under the same operating conditions which yield lowest noise temperature. The local oscilltor power requirement is ~250 nW absorbed in the bolometer. Quasi-optically coupled HEB mixers have become the device-of-choice for radio astronomical applications in the frequency regime at and above 1 THz.

•Jan 1, 2001•4 citations

Performance of a quasi-optical NbN hot-electron bolometric mixer at terahertz frequencies

Yoshinori Uzawa, Shigehito Miki, Z Wang +4 more

The performance of a hot-electron bolometric (HEB) mixer based on NbN from 0.9 to 2.5 THz was investigated using a quasi-optical receiver configuration. An HEB mixer is an ultra-thin superconducting NbN strip located at the feed point of a thick normal conducting Au spiral antenna on a high-resistivity Si substrate. The active area of the mixer was 3 nm thick, 0.4 μm long and 4 μm wide. The quasi-optics consisted of an MgO hyperhemisphere with anti-reflection caps made of Kapton-JP polyimide film and an offset parabola to reduce input losses. The frequency dependence of the double-sideband receiver noise temperature was investigated at several frequencies by using a backward wave oscillator or an optically pumped far-infrared laser as the local oscillator. Results demonstrated low-noise and wide-band characteristics, below 1 K GHz −1 over the measured frequency range. At 917 GHz, the measured receiver noise temperature was 550 K across a 500 MHz intermediate-frequency bandwidth centred at 1.5 GHz, which is slightly better than that of other HEB mixers at around this frequency. This paper was presented at the 8th International Superconductive Electronics Conference, Osaka, Japan, 19–22 June 2001.

Superconductor Science and Technology•Dec 19, 2001•5 citations

Enhanced Sensitivity of THz NbN Hot Electron Bolometer Mixers

B. Mirzaei, J. R. G. Silva, W. J. Vreeling +3 more

We studied the effect of the NbN/Au contact on the sensitivities of a NbN hot electron bolometer (HEB) mixer by measuring the double sideband (DSB) receiver noise temperature (T_rec_DSB) at three local oscillator frequencies of 1.6, 2.5 and 5.3 THz. The HEB has cleaned contact structures with a thick Au layer. We demonstrated low mixer noise temperatures (T_mixer_DSB) of 240 K and 290 K at 1.6 and 2.5 THz, respectively. The latter reach roughly 3 times the quantum noise at their frequencies. The mixer is developed for the proposed OASIS and SALTUS (concept) missions. The enhanced T_mixer_DSB are more than 30 % better in comparison with published NbN HEB mixers. The improvement can reduce the integration time of a heterodyne instrument roughly by a factor of 2. The T_mixer^DSB of the same HEB has shown limited improvement at 5.3 THz, which is partly due to non-optimized antenna geometry. Besides, the results also help to understand device physics of a wide HEB (4 um) at high frequencies.

arXiv:2311.02613•Nov 5, 2023•2 citations

Fabrication of 3 THz Quasi-Optical NbN Hot Electron Bolometer Mixers

Akira KAWAKAMI, Yoshihisa Irimajiri, Shukichi Tanaka +2 more

Hot electron bolometer mixers (HEBM) are expected to be used as low-noise heterodyne mixers in the terahertz frequency range. We are developing quasi-optical HEBMs for applications such as atmospheric remote sensing and radio astronomy in the terahertz frequency range. Therefore, we developed a fabrication method using niobium nitride (NbN) ultrathin films deposited on a silicone (Si) substrate for terahertz applications. First, a magnesium oxide buffer layer 50 nm thick was deposited on a Si substrate at approximately 525 °C. After deposition of this layer, NbN ultrathin films were deposited at ambient temperature. Using the buffer layers, we found the transition temperature of the 3.5-nm-thick NbN thin films to be approximately 10 K. The same method was applied to fabricate NbN-HEBMs on a Si substrate. The fabricated quasi-optical mixers were designed to operate at 3.1 THz. The receiver noise temperature was found to be approximately 1930 K (DSB) at 3.1 THz.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2014•0 citations
Hot-electron bolometer (HEB) mixers are a complex multi-layer thin film structure containing an ultra-thin superconducting film of NbN as a detecting element and a thick normal metal layer as an antenna structure. We have optimized the fabrication process starting with ultra-thin NbN films, Au films for antenna structures and their patterning using e-beam lithography and lift-off. The coupling between normal conducting antenna and NbN detector has been improved by introducing an intermediate NbN film to reduce proximity suppression of superconductivity in the detecting element. A critical temperature of about 9.5 K is reached for NbN films with a thickness between 5 nm and 6 nm. A twofold increase of the film thickness increases the critical temperature to 12 K. We have shown that a 20 nm thick buffer layer of NbN under a much thicker Au layer is sufficient to ensure a critical temperature of the bi-layer of 9 K. This value is close to the critical temperature of 5.5 nm thick HEB devices. The noise temperature of HEB mixer made using improved technology is about 800 K and was measured in a liquid cryogen free system with a quantum cascade laser as 2.5 THz local oscillator.
Hot-electron bolometer (HEB) mixers are used in many low noise heterodyne radio astronomical receivers. Their noise temperature is at the level of 10–15 times the quantum limit, and their gain bandwidth is from 2 GHz to slightly more than 5 GHz depending on the type of substrate material used for a device fabrication. The HEB mixers presented in this Letter are a complex multilayer thin-film structure containing an ultra-thin superconducting film of NbN as a detecting element, and a thick normal metal layer as an antenna structure. The overall performance of the device has been improved by optimisation of the HEB mixer fabrication steps starting with ultra-thin NbN films, followed by NbN/Au bi-layers for antenna structures. Patterning was achieved using electron-beam lithography and lift-off processes. The noise temperature of the HEB mixer fabricated with the improved technology is about 800 K, as measured in a cryogenic-free system with a quantum cascade laser as a local oscillator.
We highlight the progress on NbN hot electron bolometer (HEB) mixers achieved through fruitful collaboration between SRON Netherlands Institute for Space Research and Delft University of Technology, the Netherlands. This includes the best receiver noise temperatures of 700 K at 1.63 THz using a twin-slot antenna mixer and 1050 K at 2.84 THz using a spiral antenna coupled HEB mixer. The mixers are based on thin NbN films on Si and fabricated with a new contact-process and-structure. By reducing their areas HEB mixers have shown an LO power requirement as low as 30 nW. Those small HEB mixers have demonstrated equivalent sensitivity as those with large areas provided the direct detection effect due to broadband radiation is removed. To manifest that a HEB based heterodyne receiver can in practice be used at arbitrary frequencies above 2 THz, we demonstrate a 2.8 THz receiver using a THz quantum cascade laser (QCL) as local oscillator.
Experimental work on the development of a quasi-optical heterodyne receiver for the THz frequency range is reported. The mixing device is a superconducting hot electron bolometer (HEB) made from ultrathin, d = 3 - 5 nm, niobium nitride (NbN) films. Work described in this thesis comprises: The design of a prototype receiver using quasi-optical coupling. Device fabrication involving reactive magnetron sputtering of NbN films and lithographic definition of the antenna integrated mixer. An investigation of the receiver performance at frequencies between 0.6 THz and 2.5 THz. The best performance is obtained with HEB mixers made from NbN films with a thickness d = 3-3.5 nm and a critical temperature T c = 9 - 9.5 K. Double-side band receiver noise temperatures are 530 K at 0.6 THz, 650 K at 1.6 THz and 1100 K at 2.5 THz. Corrected for losses in the receiver input optics, these values amount to only 10 times the theoretical quantum limit. MgO as the substrate material has been shown to provide improved acoustic coupling between NbN film and the substrate compared to other materials such as Si or sapphire. A maximum IF gain bandwidth of 4.5 GHz has been measured under the same operating conditions which yield lowest noise temperature. The local oscilltor power requirement is ~250 nW absorbed in the bolometer. Quasi-optically coupled HEB mixers have become the device-of-choice for radio astronomical applications in the frequency regime at and above 1 THz.
The performance of a hot-electron bolometric (HEB) mixer based on NbN from 0.9 to 2.5 THz was investigated using a quasi-optical receiver configuration. An HEB mixer is an ultra-thin superconducting NbN strip located at the feed point of a thick normal conducting Au spiral antenna on a high-resistivity Si substrate. The active area of the mixer was 3 nm thick, 0.4 μm long and 4 μm wide. The quasi-optics consisted of an MgO hyperhemisphere with anti-reflection caps made of Kapton-JP polyimide film and an offset parabola to reduce input losses. The frequency dependence of the double-sideband receiver noise temperature was investigated at several frequencies by using a backward wave oscillator or an optically pumped far-infrared laser as the local oscillator. Results demonstrated low-noise and wide-band characteristics, below 1 K GHz −1 over the measured frequency range. At 917 GHz, the measured receiver noise temperature was 550 K across a 500 MHz intermediate-frequency bandwidth centred at 1.5 GHz, which is slightly better than that of other HEB mixers at around this frequency. This paper was presented at the 8th International Superconductive Electronics Conference, Osaka, Japan, 19–22 June 2001.
We studied the effect of the NbN/Au contact on the sensitivities of a NbN hot electron bolometer (HEB) mixer by measuring the double sideband (DSB) receiver noise temperature (T_rec_DSB) at three local oscillator frequencies of 1.6, 2.5 and 5.3 THz. The HEB has cleaned contact structures with a thick Au layer. We demonstrated low mixer noise temperatures (T_mixer_DSB) of 240 K and 290 K at 1.6 and 2.5 THz, respectively. The latter reach roughly 3 times the quantum noise at their frequencies. The mixer is developed for the proposed OASIS and SALTUS (concept) missions. The enhanced T_mixer_DSB are more than 30 % better in comparison with published NbN HEB mixers. The improvement can reduce the integration time of a heterodyne instrument roughly by a factor of 2. The T_mixer^DSB of the same HEB has shown limited improvement at 5.3 THz, which is partly due to non-optimized antenna geometry. Besides, the results also help to understand device physics of a wide HEB (4 um) at high frequencies.
Hot electron bolometer mixers (HEBM) are expected to be used as low-noise heterodyne mixers in the terahertz frequency range. We are developing quasi-optical HEBMs for applications such as atmospheric remote sensing and radio astronomy in the terahertz frequency range. Therefore, we developed a fabrication method using niobium nitride (NbN) ultrathin films deposited on a silicone (Si) substrate for terahertz applications. First, a magnesium oxide buffer layer 50 nm thick was deposited on a Si substrate at approximately 525 °C. After deposition of this layer, NbN ultrathin films were deposited at ambient temperature. Using the buffer layers, we found the transition temperature of the 3.5-nm-thick NbN thin films to be approximately 10 K. The same method was applied to fabricate NbN-HEBMs on a Si substrate. The fabricated quasi-optical mixers were designed to operate at 3.1 THz. The receiver noise temperature was found to be approximately 1930 K (DSB) at 3.1 THz.