Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design and High-Speed Tests of Component Circuits of an SFQ Half-Precision Floating-Point Adder Using 10 kA/cm^2 Nb Process

Toshiki Kainuma

Published Jan 1, 2009• 0 citations
OpenAlex

Related papers

50 GHz Tests of SFQ Floating-Point Multipliers Using 10 kA/cm2 Nb Advanced Process

Yasuhiro Shimamura, Toshiki Kainuma, Fumishige Miyaoka +5 more

IEICE Technical Report; IEICE Tech. Rep.•Jul 15, 2010•0 citations

Design of SFQ Floating-Point Units Using Nb Advanced Process

Toshiki Kainuma, Yasuhiro Shimamura, Fumishige Miyaoka +5 more

IEICE Technical Report; IEICE Tech. Rep.•Oct 13, 2009•0 citations

Design of High Timing Resolution SFQ Signal Processing Circuit for SNSPD using 10kA/cm^2 Nb Process

Yuichi Hasegawa, Shohei Sasaki, Masato Naruse +5 more

IEICE Technical Report; IEICE Tech. Rep.•Aug 26, 2020•0 citations

Evaluation of magnetically-coupling SFQ driver/receiver circuit fabricated using Nb 10 kA/cm 2 processes

Yuta Somei, Hiroshi Shimada, Yoshinao Mizugaki

The Japan Society of Applied Physics•Jan 26, 2021•0 citations

Design and Implementation of Component Circuits of an SFQ Half-Precision Floating-Point Adder Using 10-kA/cm$^{2}$ Nb Process

Toshiki Kainuma, Yasuhiro Shimamura, Fumishige Miyaoka +6 more

We have been developing a large-scale reconfigurable data-path (LSRDP) based on single-flux-quantum (SFQ) circuits to establish a fundamental technology for future high-performance computing systems. The SFQ floating-point adder (FPA) is one of the principal and most complicated circuit blocks in an LSRDP. In this study, we designed and implemented component circuits of an SFQ bit-serial half-precision FPA using the cell library for a 10-kA/cm2Nb process and performed on-chip high-speed tests. We demonstrated correct operation of the four-bit shifter for the significand at the clock frequencies of up to 76 GHz. The dependence of the measured DC bias margin on the operating frequency agrees reasonably well with the margin calculated using a digital simulation. The operation of the normalizer for the significand has been also confirmed at low speeds.

IEEE Transactions on Applied Superconductivity•Jan 7, 2011•13 citations

60-GHz demonstration of an SFQ half-precision bit-serial floating-point adder using 10 kA/cm2 Nb process

T. Kato, Yuki Yamanashi, Nobuyuki Yoshikawa +4 more

We are developing a large-scale reconfigurable data-path (LSRDP) based on single-flux-quantum (SFQ) circuits to establish a fundamental technology for future high-performance computing systems. In the LSRDP, an SFQ floating-point adder (FPA) is one of the main and most complicated circuit blocks. In our previous study, we implemented an SFQ half-precision (16-bit) bit-serial FPA using the ISTEC 2.5 kA/cm2standard process, and demonstrated the correct operations at 24 GHz by on-chip high-speed tests. In this study, we designed and implemented an SFQ half-precision bit-serial FPA using a cell library for the AIST 10 kA/cm2Nb nine-metal-layer process (ADP2), and carried out on-chip high speed tests. The designed FPA contains 9661 Josephson junctions and occupies a circuit area of 12.95 mm2. Its target operation frequency is 50 GHz. We have demonstrated the correct operation of the FPA at the maximum frequency of 62 GHz although there is a functional error in the design. The measured DC bias margin ranges from 102% to 108% at 50 GHz operation. The total power consumption is measured to be 2.9 mW.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•18 citations
Design and Implementation of Component Circuits of an SFQ Half-Precision Floating-Point Adder Using 10-kA/cm2^{2}2 Nb Process
We have been developing a large-scale reconfigurable data-path (LSRDP) based on single-flux-quantum (SFQ) circuits to establish a fundamental technology for future high-performance computing systems. The SFQ floating-point adder (FPA) is one of the principal and most complicated circuit blocks in an LSRDP. In this study, we designed and implemented component circuits of an SFQ bit-serial half-precision FPA using the cell library for a 10-kA/cm2Nb process and performed on-chip high-speed tests. We demonstrated correct operation of the four-bit shifter for the significand at the clock frequencies of up to 76 GHz. The dependence of the measured DC bias margin on the operating frequency agrees reasonably well with the margin calculated using a digital simulation. The operation of the normalizer for the significand has been also confirmed at low speeds.
We are developing a large-scale reconfigurable data-path (LSRDP) based on single-flux-quantum (SFQ) circuits to establish a fundamental technology for future high-performance computing systems. In the LSRDP, an SFQ floating-point adder (FPA) is one of the main and most complicated circuit blocks. In our previous study, we implemented an SFQ half-precision (16-bit) bit-serial FPA using the ISTEC 2.5 kA/cm2standard process, and demonstrated the correct operations at 24 GHz by on-chip high-speed tests. In this study, we designed and implemented an SFQ half-precision bit-serial FPA using a cell library for the AIST 10 kA/cm2Nb nine-metal-layer process (ADP2), and carried out on-chip high speed tests. The designed FPA contains 9661 Josephson junctions and occupies a circuit area of 12.95 mm2. Its target operation frequency is 50 GHz. We have demonstrated the correct operation of the FPA at the maximum frequency of 62 GHz although there is a functional error in the design. The measured DC bias margin ranges from 102% to 108% at 50 GHz operation. The total power consumption is measured to be 2.9 mW.