Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Technical Report; IEICE Tech. Rep.

50 GHz Tests of SFQ Floating-Point Multipliers Using 10 kA/cm2 Nb Advanced Process

Yasuhiro Shimamura, Toshiki Kainuma, Fumishige Miyaoka, Yuki Yamanashi, Yoshikawa Nobuyuki, Fujimaki Akira, Kazuyoshi Takagi, Takagi Naofumi

Published Jul 15, 2010• 0 citations
OpenAlex

Related papers

Design and High-Speed Tests of Component Circuits of an SFQ Half-Precision Floating-Point Adder Using 10 kA/cm^2 Nb Process

Toshiki Kainuma

•Jan 1, 2009•0 citations

Design of SFQ Floating-Point Units Using Nb Advanced Process

Toshiki Kainuma, Yasuhiro Shimamura, Fumishige Miyaoka +5 more

IEICE Technical Report; IEICE Tech. Rep.•Oct 13, 2009•0 citations

Reliability evaluation of Nb 10 kA/cm2 fabrication process for large-scale SFQ circuits

Shuichi Nagasawa, K. Hinode, T. Satoh +3 more

Physica C Superconductivity•Jul 20, 2005•23 citations

Demonstration of a 4x4 SFQ switch fabricated with the ISTEC 10-kA/cm2 Nb Advanced process 2

Masato Ito, Irina Kataeva, Masakazu Okada +4 more

IEICE Technical Report; IEICE Tech. Rep.•Jul 15, 2010•0 citations

60-GHz demonstration of an SFQ half-precision bit-serial floating-point adder using 10 kA/cm2 Nb process

T. Kato, Yuki Yamanashi, Nobuyuki Yoshikawa +4 more

We are developing a large-scale reconfigurable data-path (LSRDP) based on single-flux-quantum (SFQ) circuits to establish a fundamental technology for future high-performance computing systems. In the LSRDP, an SFQ floating-point adder (FPA) is one of the main and most complicated circuit blocks. In our previous study, we implemented an SFQ half-precision (16-bit) bit-serial FPA using the ISTEC 2.5 kA/cm2standard process, and demonstrated the correct operations at 24 GHz by on-chip high-speed tests. In this study, we designed and implemented an SFQ half-precision bit-serial FPA using a cell library for the AIST 10 kA/cm2Nb nine-metal-layer process (ADP2), and carried out on-chip high speed tests. The designed FPA contains 9661 Josephson junctions and occupies a circuit area of 12.95 mm2. Its target operation frequency is 50 GHz. We have demonstrated the correct operation of the FPA at the maximum frequency of 62 GHz although there is a functional error in the design. The measured DC bias margin ranges from 102% to 108% at 50 GHz operation. The total power consumption is measured to be 2.9 mW.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•18 citations

Design and High-Speed Demonstration of Single-Flux-Quantum Bit-Serial Floating-Point Multipliers Using a 10kA/cm2 Nb Process

Xizhu Peng, Yuki Yamanashi, Nobuyuki Yoshikawa +4 more

Recently, we proposed a new data-path architecture, named a large-scale reconfigurable data-path (LSRDP), based on single-flux-quantum (SFQ) circuits, to establish a fundamental technology for future high-end computers. In this architecture, a large number of SFQ floating-point units (FPUs) are used as core components, and their high performance and low power consumption are essential. In this research, we implemented an SFQ half-precision bit-serial floating-point multiplier (FPM) with a target clock frequency of 50GHz, using the AIST 10kA/cm2 Nb process. The FPM was designed, based on a systolic-array architecture. It contains 11,066 Josephson junctions, including on-chip high-speed test circuits. The size and power consumption of the FPM are 6.66mm × 1.92mm and 2.83mW, respectively. Its correct operation was confirmed at a maximum frequency of 93.4GHz for the exponent part and of 72.0GHz for the significand part by on-chip high-speed tests.

IEICE Transactions on Electronics•Jan 1, 2014•13 citations
We are developing a large-scale reconfigurable data-path (LSRDP) based on single-flux-quantum (SFQ) circuits to establish a fundamental technology for future high-performance computing systems. In the LSRDP, an SFQ floating-point adder (FPA) is one of the main and most complicated circuit blocks. In our previous study, we implemented an SFQ half-precision (16-bit) bit-serial FPA using the ISTEC 2.5 kA/cm2standard process, and demonstrated the correct operations at 24 GHz by on-chip high-speed tests. In this study, we designed and implemented an SFQ half-precision bit-serial FPA using a cell library for the AIST 10 kA/cm2Nb nine-metal-layer process (ADP2), and carried out on-chip high speed tests. The designed FPA contains 9661 Josephson junctions and occupies a circuit area of 12.95 mm2. Its target operation frequency is 50 GHz. We have demonstrated the correct operation of the FPA at the maximum frequency of 62 GHz although there is a functional error in the design. The measured DC bias margin ranges from 102% to 108% at 50 GHz operation. The total power consumption is measured to be 2.9 mW.
Recently, we proposed a new data-path architecture, named a large-scale reconfigurable data-path (LSRDP), based on single-flux-quantum (SFQ) circuits, to establish a fundamental technology for future high-end computers. In this architecture, a large number of SFQ floating-point units (FPUs) are used as core components, and their high performance and low power consumption are essential. In this research, we implemented an SFQ half-precision bit-serial floating-point multiplier (FPM) with a target clock frequency of 50GHz, using the AIST 10kA/cm2 Nb process. The FPM was designed, based on a systolic-array architecture. It contains 11,066 Josephson junctions, including on-chip high-speed test circuits. The size and power consumption of the FPM are 6.66mm × 1.92mm and 2.83mW, respectively. Its correct operation was confirmed at a maximum frequency of 93.4GHz for the exponent part and of 72.0GHz for the significand part by on-chip high-speed tests.