Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Amplifying quantum signals with Josephson tunnel junc- tion circuits

Michel Devoret, Benjamin Huard, N. Bergeal, Robert J. Schoelkopf, S. M. Girvin

Published Jan 1, 2008• 0 citations
Publisher

Abstract

Amplifiers are crucial in every experiment carrying out a very sensitive measurement. However, they always degrade the information by adding noise. Quantum mechanics puts a limit on how small this degradation can be. Theoretically, the minimum noise energy added by a phase-preserving amplifier to the signal it processes amounts at least to half a photon at the signal frequency. In this article, we show that we can build a practical microwave amplifying circuit that fulfills the minimal requirements to reach this quantum limit. The readout of solid-state qubits, and more generally, the measurement of very weak signals in various areas of science, can benefit from this new superconducting device. We also discuss how our circuit can be the basic buiding block for a variety of practical applications such as frequency conversion with and without photon number gain, dynamic cooling and production of entangled signal pairs.

DOI
10.3254/978-1-60750-039-1-151

Related papers

Three-wave mixing of microwave photons with Josephson junctions and resonators

Emmanuel Flurin, Nicolas Roch, Philippe Campagne-Ibarcq +3 more

Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and present results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.

•Mar 19, 2012•0 citations

Three-wave mixing in the GHz range with Josephson junctions and resonators

Nicolas Roch, Emmanuel Flurin, F. Mallet +2 more

Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and show preliminary results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.

•Feb 20, 2012•0 citations

Josephson parametric amplifiers for quantum information processing

Benjamin Huard, Emmanuel Flurin, Nicolas Roch +3 more

Nowadays, it is possible to control and measure the quantum state of systems with a few degrees of freedom, whether they are microscopic objects like cold atoms and single photons, or macroscopic objects like superconducting circuits. Such delicate experiments require an interface which bridges the gap of orders of magnitudes in energy between the quantum object and the data acquisition system. This problem is solved by an active device: the amplifier. Although the amplifier is necessary to overcome the noise at the stage of data acquisition, it eventually alters the signal. We have developed an amplifier for microwave signals which adds only the minimum of noise allowed by quantum laws: the equivalent of half a photon of noise referred to the input. Our amplifier is based on a superconducting circuit of Josephson junctions in superconducting resonators. We found a way to make it practical to use by tuning its center frequency over 500 MHz. We are now trying to increase its bandwidth for a given gain using more compact resonators. In this talk, I will show how the amplifier works and also its applications to quantum information processing. This circuit can be used to generate and combine twin microwave photons within an integrated circuit. Finally, I will show that such an amplifier allows real time measurement of the state of a qubit and quantum feedback protocols.

•Mar 22, 2012•0 citations

Towards quantum-noise limited multiplexed microwave readout of qubits

Kevin P. O’Brien, Chris Macklin, David J. Hover +5 more

Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.

IEEE MTT-S International Microwave Symposium digest•May 1, 2016•2 citations

Enhancing qubit readout fidelity with two-mode squeezing of the coherent measurement signal

Baleegh Abdo, William Shanks, Oblesh Jinka +1 more

The ability to perform high-fidelity quantum nondemolition qubit readout is pivotal for the realization of large and powerful quantum computers. Such readout of superconducting qubits is generally enabled by amplifying the weak dispersive measurement signals using phase-preserving quantum-limited Josephson amplifiers with sufficient gain to dilute the contribution of the added noise by the output chain. Here, we further enhance the qubit readout fidelity by (1) simultaneously measuring the two-mode squeezed states of the amplified readout signals at the signal and idler frequencies of the nondegenerate amplifier and (2) coherently combining them at the classical processing stage following a relative rotation that maximizes the signal to noise ratio of the qubit-encoded readout quadrature. Such readout scheme exhibits enhancement in the readout fidelity for all practical values of amplifier gain and noise added by the output chain and is fully compatible with frequency multiplexed setups used in large quantum processors.

quant-pharXiv:2603.15804•EPJ Quantum Technology•Mar 18, 2026•0 citations

Microstrip Superconducting Quantum Interference Devices for Quantum Information Science

De Feo, P Michael

Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.

•Jan 1, 2012•0 citations
Amplifiers are crucial in every experiment carrying out a very sensitive measurement. However, they always degrade the information by adding noise. Quantum mechanics puts a limit on how small this degradation can be. Theoretically, the minimum noise energy added by a phase-preserving amplifier to the signal it processes amounts at least to half a photon at the signal frequency. In this article, we show that we can build a practical microwave amplifying circuit that fulfills the minimal requirements to reach this quantum limit. The readout of solid-state qubits, and more generally, the measurement of very weak signals in various areas of science, can benefit from this new superconducting device. We also discuss how our circuit can be the basic buiding block for a variety of practical applications such as frequency conversion with and without photon number gain, dynamic cooling and production of entangled signal pairs.
Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and present results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.
Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and show preliminary results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.
Nowadays, it is possible to control and measure the quantum state of systems with a few degrees of freedom, whether they are microscopic objects like cold atoms and single photons, or macroscopic objects like superconducting circuits. Such delicate experiments require an interface which bridges the gap of orders of magnitudes in energy between the quantum object and the data acquisition system. This problem is solved by an active device: the amplifier. Although the amplifier is necessary to overcome the noise at the stage of data acquisition, it eventually alters the signal. We have developed an amplifier for microwave signals which adds only the minimum of noise allowed by quantum laws: the equivalent of half a photon of noise referred to the input. Our amplifier is based on a superconducting circuit of Josephson junctions in superconducting resonators. We found a way to make it practical to use by tuning its center frequency over 500 MHz. We are now trying to increase its bandwidth for a given gain using more compact resonators. In this talk, I will show how the amplifier works and also its applications to quantum information processing. This circuit can be used to generate and combine twin microwave photons within an integrated circuit. Finally, I will show that such an amplifier allows real time measurement of the state of a qubit and quantum feedback protocols.
Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.
The ability to perform high-fidelity quantum nondemolition qubit readout is pivotal for the realization of large and powerful quantum computers. Such readout of superconducting qubits is generally enabled by amplifying the weak dispersive measurement signals using phase-preserving quantum-limited Josephson amplifiers with sufficient gain to dilute the contribution of the added noise by the output chain. Here, we further enhance the qubit readout fidelity by (1) simultaneously measuring the two-mode squeezed states of the amplified readout signals at the signal and idler frequencies of the nondegenerate amplifier and (2) coherently combining them at the classical processing stage following a relative rotation that maximizes the signal to noise ratio of the qubit-encoded readout quadrature. Such readout scheme exhibits enhancement in the readout fidelity for all practical values of amplifier gain and noise added by the output chain and is fully compatible with frequency multiplexed setups used in large quantum processors.
Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.