The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise
N. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in
GaAs, followed by considerations of the
AlN,
LiNbO3, and
AlN-on-
Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing
N, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and
N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
Quantum transduction refers to the coherent conversion between microwave and optical states, which can be achieved by quantum teleportation if given high-fidelity microwave-optical entanglement, namely entanglement-based quantum transduction. Reliable microwave-optical entanglement can be generated using various platforms. In this paper we base the discussion on a piezo-optomechanical system and make the teleportation induced conversion scheme more concrete in the framework of quantum channel theory. By comparing the quantum capacity between the entanglement-based conversion channel and the traditional direct quantum transduction channel, we show that the entanglement-based scheme indeed admits a positive transduction rate when the direct quantum transduction has zero quantum capacity. Given two piezo-optomechanical systems, we also investigate the generation of microwave-microwave entanglement from entanglement swapping within continuous-variable and discrete-variable settings, showing the potentials of directly connecting microwave quantum processors by microwave-microwave quantum teleportation.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.
Microwave and optical photons are two principle carriers for quantum information. Microwave photons can be effectively manipulated by superconducting circuits at milli-Kelvin environments; optical photons transmit information over long distances in optical fibers. Therefore, microwave-to-optical (MO) quantum converters, which interface superconducting qubits and optical photons, represent an indispensable component in future quantum networks. Here, we present our recent efforts on developing integrated gigahertz piezo-optomechanics and electro-optics (EO) MO converters. We demonstrate efficient bi-directional conversion in both schemes at cryogenic temperatures. Moreover, we realized MO conversion with the device in the quantum ground state, while achieving efficient conversion efficiency. Our results represent a substantial step towards faithful microwave to optical quantum conversions.
Two-way microwave-optical quantum transduction is essential to connecting distant superconducting qubits via optical fiber and to enable quantum networking at a large scale. In Blésin, Tian, Bhave, and Kippenberg's article [], they lay out a two-way quantum transducer converting between microwave photons and telecom-band photons by way of an intermediary gigahertz-band phonon mode utilizing piezoelectric and optomechanical interactions respectively (and are the first to work out the quantum piezoelectric coupling). In this work, we examine both the piezoelectric, and optomechanical interactions from first principles, and together with the evanescent coupling between optical modes, discuss what parameters matter most in optimizing this kind of quantum transducer. For its additional utility, we have also compiled a table of relevant properties of optical materials that may be used as elements in transducers.
State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness
WT, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.