Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1907.04830 · Physical Review Applied

Microwave-to-Optical Transduction Using a Mechanical Supermode for Coupling Piezoelectric and Optomechanical Resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram, Kartik A. Srinivasan

Published Jan 16, 2020• 78 citations
arXivHTMLPDF

Abstract

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in $\mathrm{Ga}\mathrm{As}$, followed by considerations of the $\mathrm{Al}\mathrm{N}$, ${\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}$, and $\mathrm{Al}\mathrm{N}$-on-$\mathrm{Si}$ platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing $N$, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and $N<0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.

DOI
10.1103/physrevapplied.13.014027

Related papers

Quantum coherent microwave-optical transduction using high-overtone bulk acoustic resonances

Terence Blésin, Hao Tian, Sunil Ashok Bhave +1 more

A device capable of converting single quanta of the microwave field to the optical domain is an outstanding endeavor in the context of quantum interconnects between distant superconducting qubits, but likewise can have applications in other fields, such as radio astronomy or, in the classical realm, microwave photonics. A variety of transduction approaches, based on optomechanical or electro-optical interactions, have been proposed and realized, yet the required vanishing added noises and an efficiency approaching unity, have not yet been attained. Here we present a transduction scheme that could in theory satisfy the requirements for quantum coherent bidirectional transduction. Our scheme relies on an intermediary mechanical mode, a high-overtone bulk acoustic resonance (HBAR), to coherently couple microwave and optical photons through the piezoelectric and strain-optical effects. Its efficiency results from the combination of integrated ${\mathrm{Si}}_{3}{\mathrm{N}}_{4}$ photonic circuits with ultra-low loss sustaining high intracavity photon numbers with the highly efficient microwave to mechanical transduction offered by piezoelectrically coupled HBAR. We develop a quantum theory for this multipartite system by first introducing a quantization method for the piezoelectric interaction between the microwave mode and the mechanical mode from first principles (which to our knowledge has not been presented in this form) and link the latter to the conventional Butterworth-Van Dyke model. The HBAR is subsequently coupled to a pair of hybridized optical modes from coupled optical ring cavities via the strain-optical effect. We analyze the conversion capabilities of the proposed device using signal flow graphs, and demonstrate that near quantum coherent transduction is possible, with realistic experimental parameters. Combined with the high thermal conduction via the device bulk, heating effects are mitigated, and the approach does not require superconducting resonators that are susceptible to absorption of optical photons.

arXiv:2103.00471•Physical Review A•Nov 3, 2021•26 citations

Design of an ultra-low mode volume piezo-optomechanical quantum transducer

Piero Chiappina, Jash Banker, Srujan Meesala +3 more

Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.

arXiv:2303.03664•Optics Express•Jun 14, 2023•17 citations

Integrated and tunable microwave-to-optical transduction via magno-optomechanics

J. Q Liu, Zhi-Gang Hu, Yu-Xiang Zhang +1 more

Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit $(\ensuremath{\sim}1)$ is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.

Physical Review A•Aug 18, 2025•6 citations

Optomechanical Microwave-to-Optical Photon Transducer Chips: Empowering the Quantum Internet Revolution

Xinyao Xu, Yifei Zhang, Jindao Tang +9 more

The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.

Micromachines•Mar 31, 2024•7 citations

Mechanically mediated optical-microwave quantum state transfer by feedback

Max P. Foreman, Jesse J. Slim, Warwick P. Bowen

State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness $\mathcal{W}_T$, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.

quant-pharXiv:2512.05457•Dec 8, 2025•0 citations

Enhanced Microwave-Optical Conversion Via Ancillary Electro-Mechanical Coupling

Tianli Wei, Dewei Wu, Qiang Miao +1 more

Converting signals from the microwave to the optical domain has attracted great attention due to its potential applications in the field of quantum networks. Achieving efficient transduction is a significant yet challenging task, where a high efficiency at single photon level and low added noise are required. Electro-opto-mechanics have been proven to be efficient to convert microwave and optical photons bidirectionally. In this work, we propose and demonstrate an enhanced microwave-optical conversion in an electro-opto-mechanical system by introducing a mechanical ancilla attached the microwave resonator. Based on the ancillary electromechanical coupling, the damping rate of the microwave resonator is controlled and further leads to significant enhancement in conversion, such as the increase of conversion efficiency, broadening of conversion bandwidth and reduction of added noise. It provides a feasible approach to realize a broadband microwave-optical conversion with high efficiency. Moreover, the reduced added noise may break the limitation of quantum transduction due to the ancillary electromechanical coupling. Our scheme is also applicable and feasible for opto-mechanics and other systems to achieve practical quantum interface.

Results in Physics•Jan 1, 2021•1 citation
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency \ensuremathη\ensuremath{\eta}\ensuremathη and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs\mathrm{Ga}\mathrm{As}GaAs, followed by considerations of the AlN\mathrm{Al}\mathrm{N}AlN, LiNbO3{\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}LiNbO3​, and AlN\mathrm{Al}\mathrm{N}AlN-on-Si\mathrm{Si}Si platforms. We present strategies for maximizing \ensuremathη\ensuremath{\eta}\ensuremathη and minimizing NNN, and find that simultaneously achieving \ensuremath{\eta}>50\mathrm{%} and N<0.5N<0.5N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
A device capable of converting single quanta of the microwave field to the optical domain is an outstanding endeavor in the context of quantum interconnects between distant superconducting qubits, but likewise can have applications in other fields, such as radio astronomy or, in the classical realm, microwave photonics. A variety of transduction approaches, based on optomechanical or electro-optical interactions, have been proposed and realized, yet the required vanishing added noises and an efficiency approaching unity, have not yet been attained. Here we present a transduction scheme that could in theory satisfy the requirements for quantum coherent bidirectional transduction. Our scheme relies on an intermediary mechanical mode, a high-overtone bulk acoustic resonance (HBAR), to coherently couple microwave and optical photons through the piezoelectric and strain-optical effects. Its efficiency results from the combination of integrated Si3N4{\mathrm{Si}}_{3}{\mathrm{N}}_{4}Si3​N4​ photonic circuits with ultra-low loss sustaining high intracavity photon numbers with the highly efficient microwave to mechanical transduction offered by piezoelectrically coupled HBAR. We develop a quantum theory for this multipartite system by first introducing a quantization method for the piezoelectric interaction between the microwave mode and the mechanical mode from first principles (which to our knowledge has not been presented in this form) and link the latter to the conventional Butterworth-Van Dyke model. The HBAR is subsequently coupled to a pair of hybridized optical modes from coupled optical ring cavities via the strain-optical effect. We analyze the conversion capabilities of the proposed device using signal flow graphs, and demonstrate that near quantum coherent transduction is possible, with realistic experimental parameters. Combined with the high thermal conduction via the device bulk, heating effects are mitigated, and the approach does not require superconducting resonators that are susceptible to absorption of optical photons.
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.
Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit $(\ensuremath{\sim}1)$ is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.
The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.
State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness WT\mathcal{W}_TWT​, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.
Converting signals from the microwave to the optical domain has attracted great attention due to its potential applications in the field of quantum networks. Achieving efficient transduction is a significant yet challenging task, where a high efficiency at single photon level and low added noise are required. Electro-opto-mechanics have been proven to be efficient to convert microwave and optical photons bidirectionally. In this work, we propose and demonstrate an enhanced microwave-optical conversion in an electro-opto-mechanical system by introducing a mechanical ancilla attached the microwave resonator. Based on the ancillary electromechanical coupling, the damping rate of the microwave resonator is controlled and further leads to significant enhancement in conversion, such as the increase of conversion efficiency, broadening of conversion bandwidth and reduction of added noise. It provides a feasible approach to realize a broadband microwave-optical conversion with high efficiency. Moreover, the reduced added noise may break the limitation of quantum transduction due to the ancillary electromechanical coupling. Our scheme is also applicable and feasible for opto-mechanics and other systems to achieve practical quantum interface.