Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP Advances

Reduction of background scattered light in vacuum systems for cold atoms experiments

Jamie Vovrosh, Luuk Earl, H. Thomas, Jonathan Winch, Ben Stray, Kevin D. Ridley, Mehdi Langlois, Kai Bongs, Michael Holynski

Published Oct 1, 2020• 5 citations
Publisher

Abstract

Recent advances in the understanding and control of cold atom systems have resulted in devices with extraordinary metrological performance. To further improve the performance in these systems, additional methods of noise reduction are needed. Here, we examine the noise reduction possible from vacuum compatible low reflection coatings in cold atom systems by characterizing a black coating and its compatibility in a Magneto-Optical Trap (MOT). We demonstrate that the commercially available PCO35® coating provides low-reflectivity surfaces that are ultra-high vacuum compatible. The reflective properties of the coating are compared to titanium, a common vacuum chamber material, and the reduction to scattered light is characterized over a range of angles and wavelengths. The outgassing properties of the coating are measured to be less than that of the vacuum system used to test the coating, which is limited to 3 × 10−8 mbar L cm−2 s−1. The coating is applied to a vacuum chamber housing a rubidium prism MOT, and its vacuum compatibility is assessed and compared to an identical non-coated system. Finally, the effect of scattered light reduction in a generalized system is explored theoretically. These results show promise for reducing background light in cold atom experiments via the use of low-reflectivity coatings.

DOI
10.1063/5.0030041

Related papers

Ultrahigh vacuum pressure measurement using magneto-optical trap on atom chip

S. Supakar, Vivek Singh, Vibhuti Bhushan Tiwari +1 more

In this work, the UHV background pressure as low as 1.1×10−10 Torr has been measured using the loss rate characteristics of a vapor-loaded magneto-optical trap (MOT) formed on an atom chip in a UHV chamber. The loss rate due to non-rubidium (Rb) gases in the background in the chamber has been estimated by operating the MOT in low cooling beam intensities and low Rb pressure regimes simultaneously. Using this approach, we minimized the contributions of the intra-trap collisions as well as background MOT species collisions to the measured trap loss rate in our setup. These results can be useful for development of cold-atom based UHV pressure standards.

arXiv:2302.14305•Journal of Applied Physics•Jul 10, 2023•6 citations

Progress on a Miniature Cold-Atom Frequency Standard

David R. Scherer, Robert Lutwak, Mark J. Mescher +8 more

Atomic clocks play a crucial role in timekeeping, communications, and navigation systems. Recent efforts enabled by heterogeneous MEMS integration have led to the commercial introduction of Chip-Scale Atomic Clocks (CSAC) with a volume of 16 cm3, power consumption of 120 mW, and instability (Allan Deviation) of σ(τ = 1 sec) < 2e-10. In order to reduce the temperature sensitivity of next-generation CSACs for timing applications, the interaction of atoms with the environment must be minimized, which can be accomplished in an architecture based on trapped, laser-cooled atoms. In this paper, we present results describing the development of a miniature cold-atom apparatus for operation as a frequency standard. Our architecture is based on laser-cooling a sample of neutral atoms in a Magneto-Optical Trap (MOT) using a conical retro-reflector in a miniature vacuum chamber. Trapping the atoms in vacuum and performing microwave interrogation in the dark reduces the temperature sensitivity compared to vapor-cell CSACs. We present details of the component development associated with the laser systems, opto-electronics, and vacuum package for miniature cold-atom technology. Finally, we conclude by characterizing the optimum alkali background pressure for such a cold-atom frequency standard.

arXiv:1411.5006•Nov 18, 2014•16 citations

Collective effects in light scattering from cold strontium clouds

Paulo Hisao Moriya

A cold atomic cloud is a versatile object, because it offers many handles to control and tune its properties. This facilitates studies of its behavior in various circumstances, such as sample temperature, size and density, composition, dimensionality and coherence time. The range of possible experiments is constrained by the specifications of the atomic species used. In this thesis presents the work done in the experiment for laser cooling of strontium atoms, focusing on its stability, which should provide cold and ultracold samples for the study of collective effects in light scattering. From the initial apparatus, innumerous changes were performed. The vacuum system got improved and now reached lower ultra high vacuum due to the pre-baking done to its parts and adding a titanium-sublimation stage. The quadrupole trap were improved by the design and construction of a new pair of coils. The stability of the blue, green and red laser systems and the loss prevention of laser light were improved, giving rise to a robust apparatus. Another important point is the development of homemade devices to reduce the costs and to be used as a monitor of different parts of an cold atoms experiment. From this homemade devices, we could demonstrate a dramatic linewidth narrowing by injection lock of an low cost 461 nm diode laser and its application to our strontium experiment. In the end, this improved experimental apparatus made possible the study of a new scattering effect, the mirror assisted coherent back-scattering (mCBS).

•Jun 20, 2016•1 citation

Study of Collision Cross Section of Ultra-Cold Rubidium using a Magneto-Optic and pure Magnetic trap

David E. Fagnan

This thesis discusses a new technique for measuring collision cross sections, using a magnetooptical trap (MOT) or magnetic trap as well as theoretical predictions for the resulting measurements based on scattering theory. The initial discussion focuses on a theoretical overview of the principles involved in laser cooling and trapping, magnetic trapping, and scattering theory. Following this, a detailed overview of the experimental instruments and methods describing the vacuum system, laser light, magnetic coils, imaging and control systems will be presented. In addition to an experimental overview, the methods and mechanical formulation involved in predicting cross sections and loss rates based on scattering theory are discussed. Finally, an overview of both experimental and theoretical results including cross sections and loss rates for the case of trapped 87Rb and background argon or helium gas will be given. The results gathered in this thesis show a strong dependence of elastic collision cross section on trap depth, which indicates that the majority of elastic collisions between ultra-cold rubidium and room temperature argon impart energy below 1K. These results suggest that the magnetic trap may be a better tool for measuring total elastic collision cross sections.

•Jan 1, 2009•0 citations

Realization of the Compact Magneto-Optical Trap Based on Single Laser with Frequency Modulation

Shuning Bao, Bin Wu, Pengfei Cao +9 more

In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.

Photonics•Jan 23, 2025•0 citations

Compact magneto-optical trap with a quartz vacuum chamber for miniature gravimeters

Kanxing Weng, Bin Wu, Jiahong Lin +3 more

The realization of a compact magneto-optical trap (MOT) with a quartz vacuum chamber via ultra-low power of a cooling laser is reported. The dependence of the properties of the MOT on key experimental parameters is investigated. The efficiency of capturing atoms of the novel MOT is compared with that of the metal vacuum chamber. The compact quartz vacuum chamber can achieve a maximum rubidium ( 87 R b ) atomic loading rate of about 8 × 10 9 / s with less than 60 mW of the total power of cooling lasers, while the metal chamber obtains the maximum atomic loading rate of about 3 × 10 9 / s with more than 240 mW of the total power of cooling lasers. The compact apparatus avoids undesired effects found in a metal chamber, such as high power consumption and the magnetic-field eddy current effect. This compact MOT is helpful in the design of miniature atomic gravimeters.

Journal of the Optical Society of America B•Apr 8, 2020•10 citations
Recent advances in the understanding and control of cold atom systems have resulted in devices with extraordinary metrological performance. To further improve the performance in these systems, additional methods of noise reduction are needed. Here, we examine the noise reduction possible from vacuum compatible low reflection coatings in cold atom systems by characterizing a black coating and its compatibility in a Magneto-Optical Trap (MOT). We demonstrate that the commercially available PCO35® coating provides low-reflectivity surfaces that are ultra-high vacuum compatible. The reflective properties of the coating are compared to titanium, a common vacuum chamber material, and the reduction to scattered light is characterized over a range of angles and wavelengths. The outgassing properties of the coating are measured to be less than that of the vacuum system used to test the coating, which is limited to 3 × 10−8 mbar L cm−2 s−1. The coating is applied to a vacuum chamber housing a rubidium prism MOT, and its vacuum compatibility is assessed and compared to an identical non-coated system. Finally, the effect of scattered light reduction in a generalized system is explored theoretically. These results show promise for reducing background light in cold atom experiments via the use of low-reflectivity coatings.
In this work, the UHV background pressure as low as 1.1×10−10 Torr has been measured using the loss rate characteristics of a vapor-loaded magneto-optical trap (MOT) formed on an atom chip in a UHV chamber. The loss rate due to non-rubidium (Rb) gases in the background in the chamber has been estimated by operating the MOT in low cooling beam intensities and low Rb pressure regimes simultaneously. Using this approach, we minimized the contributions of the intra-trap collisions as well as background MOT species collisions to the measured trap loss rate in our setup. These results can be useful for development of cold-atom based UHV pressure standards.
Atomic clocks play a crucial role in timekeeping, communications, and navigation systems. Recent efforts enabled by heterogeneous MEMS integration have led to the commercial introduction of Chip-Scale Atomic Clocks (CSAC) with a volume of 16 cm3, power consumption of 120 mW, and instability (Allan Deviation) of σ(τ = 1 sec) < 2e-10. In order to reduce the temperature sensitivity of next-generation CSACs for timing applications, the interaction of atoms with the environment must be minimized, which can be accomplished in an architecture based on trapped, laser-cooled atoms. In this paper, we present results describing the development of a miniature cold-atom apparatus for operation as a frequency standard. Our architecture is based on laser-cooling a sample of neutral atoms in a Magneto-Optical Trap (MOT) using a conical retro-reflector in a miniature vacuum chamber. Trapping the atoms in vacuum and performing microwave interrogation in the dark reduces the temperature sensitivity compared to vapor-cell CSACs. We present details of the component development associated with the laser systems, opto-electronics, and vacuum package for miniature cold-atom technology. Finally, we conclude by characterizing the optimum alkali background pressure for such a cold-atom frequency standard.
A cold atomic cloud is a versatile object, because it offers many handles to control and tune its properties. This facilitates studies of its behavior in various circumstances, such as sample temperature, size and density, composition, dimensionality and coherence time. The range of possible experiments is constrained by the specifications of the atomic species used. In this thesis presents the work done in the experiment for laser cooling of strontium atoms, focusing on its stability, which should provide cold and ultracold samples for the study of collective effects in light scattering. From the initial apparatus, innumerous changes were performed. The vacuum system got improved and now reached lower ultra high vacuum due to the pre-baking done to its parts and adding a titanium-sublimation stage. The quadrupole trap were improved by the design and construction of a new pair of coils. The stability of the blue, green and red laser systems and the loss prevention of laser light were improved, giving rise to a robust apparatus. Another important point is the development of homemade devices to reduce the costs and to be used as a monitor of different parts of an cold atoms experiment. From this homemade devices, we could demonstrate a dramatic linewidth narrowing by injection lock of an low cost 461 nm diode laser and its application to our strontium experiment. In the end, this improved experimental apparatus made possible the study of a new scattering effect, the mirror assisted coherent back-scattering (mCBS).
This thesis discusses a new technique for measuring collision cross sections, using a magnetooptical trap (MOT) or magnetic trap as well as theoretical predictions for the resulting measurements based on scattering theory. The initial discussion focuses on a theoretical overview of the principles involved in laser cooling and trapping, magnetic trapping, and scattering theory. Following this, a detailed overview of the experimental instruments and methods describing the vacuum system, laser light, magnetic coils, imaging and control systems will be presented. In addition to an experimental overview, the methods and mechanical formulation involved in predicting cross sections and loss rates based on scattering theory are discussed. Finally, an overview of both experimental and theoretical results including cross sections and loss rates for the case of trapped 87Rb and background argon or helium gas will be given. The results gathered in this thesis show a strong dependence of elastic collision cross section on trap depth, which indicates that the majority of elastic collisions between ultra-cold rubidium and room temperature argon impart energy below 1K. These results suggest that the magnetic trap may be a better tool for measuring total elastic collision cross sections.
In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.
The realization of a compact magneto-optical trap (MOT) with a quartz vacuum chamber via ultra-low power of a cooling laser is reported. The dependence of the properties of the MOT on key experimental parameters is investigated. The efficiency of capturing atoms of the novel MOT is compared with that of the metal vacuum chamber. The compact quartz vacuum chamber can achieve a maximum rubidium ( 87 R b ) atomic loading rate of about 8 × 10 9 / s with less than 60 mW of the total power of cooling lasers, while the metal chamber obtains the maximum atomic loading rate of about 3 × 10 9 / s with more than 240 mW of the total power of cooling lasers. The compact apparatus avoids undesired effects found in a metal chamber, such as high power consumption and the magnetic-field eddy current effect. This compact MOT is helpful in the design of miniature atomic gravimeters.