Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical review. B./Physical review. B

Superconducting ‘twin’ qubit

Ilya Antonov, Rais S. Shaikhaidarov, Vladimir N Antonov, O. V. Astafiev

Published Sep 21, 2020• 4 citations
Publisher

Abstract

We study a flux qubit consisting of a symmetrical pair of superconducting loops, with two Josephson junctions in each, joined by a common Josephson junction---a `twin' flux qubit. The qubit is capacitively coupled to a transmission line, which allows us to characterize the spectrum of the device by measuring the scattering of propagated electromagnetic waves. We perform a detailed analytical analysis of the double-loop system, revealing its properties, and compare experimental results with numerical simulations. At half-flux quantum bias of both loops, the qubit is protected against global and local magnetic field fluctuations with much less sensitivity to the global field in the second order. The system selection rules allow even-odd transitions and prohibit transitions between even-even or odd-odd levels due to the symmetry of the device.

DOI
10.1103/physrevb.102.115422

Related papers

Quantum theory of three-junction flux qubit with non-negligible loop inductance: Towards scalability

Timothy L. Robertson, B. L. T. Plourde, P. A. Reichardt +3 more

The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.

Physical Review B•May 30, 2006•23 citations

Characterization of a Double-Loop Four-Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.

Book Publisher International (a part of SCIENCEDOMAIN International)•Aug 19, 2024•0 citations

Bifluxon: Fluxon-Parity-Protected Superconducting Qubit

Konstantin Kalashnikov, Wen Ting Hsieh, Wenyuan Zhang +6 more

We develop and characterize a symmetry-protected superconducting qubit that offers simultaneous exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise.The qubit consists of a Cooper-pair box (CPB) shunted by a superinductor, forming a superconducting loop.Provided the offset charge on the CPB island is an odd number of electrons, the qubit potential corresponds to that of a cos (φ/2) Josephson element, preserving the parity of fluxons in the loop via Aharonov-Casher interference.In this regime, the logical-state wavefunctions reside in disjoint regions of Hilbert space, thereby ensuring protection against energy decay.By switching the protection on, we observe a tenfold increase of the decay time, reaching up to 100 μs.Though the qubit is sensitive to charge noise, the sensitivity is much reduced in comparison with the charge qubit, and the charge-noise-induced dephasing time of the current device exceeds 1 μs.Implementation of full dephasing protection can be achieved in the next-generation devices by combining several cos(φ/2) Josephson elements in a small array.

arXiv:1910.03769•PRX Quantum•Sep 3, 2020•90 citations

Higher Josephson harmonics in a tunable double-junction transmon qubit

Ksenia Shagalov, David Feldstein-Bofill, Leo Uhre Jakobsen +11 more

Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to $\sim10\%$ of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.

quant-pharXiv:2512.08470•Physical Review Letters•Dec 10, 2025•6 citations

Decoherence rates in complex Josephson qubit circuits

David Peter Divincenzo, Frederico Brito, R. H. Koch

A complete analysis of the decoherence properties of a Josephson junction qubit is presented. The qubit is of the flux type and consists of two large loops forming a gradiometer, one small loop, and three Josephson junctions. We develop a complete, quantitative description of the inductances and capacitances of the circuit. Including two stray capacitances makes the quantum mechanical modeling of the system five dimensional. To make the required calculation tractable, we devise a general Born-Oppenheimer approximation which reduces the effective dimensionality in the calculation to one. Contributions to relaxation $({T}_{1})$ and dephasing $({T}_{\ensuremath{\phi}})$ arising from two different control circuits, one coupled to the small loop and one coupled to a large loop, is computed. We explore ${T}_{1}$ and ${T}_{\ensuremath{\phi}}$ along an optimal line in the space of applied fluxes; along this ``S line'' we see significant and rapidly varying contributions to the decoherence parameters, primarily from the circuit coupling to the large loop.

arXiv:cond-mat/0510843•Physical Review B•Jul 25, 2006•28 citations

Phase coherent dynamics of a superconducting flux qubit with capacitive bias readout

Frank Deppe, M. Mariantoni, E. P. Menzel +7 more

We present a systematic study of the phase coherent dynamics of a superconducting three-Josephson-junction flux qubit. The qubit state is detected with the integrated-pulse method, which is a variant of the pulsed switching-dc-superconducting quantum interference device (SQUID) method. In this scheme, the dc SQUID bias current pulse is applied via a capacitor instead of a resistor, giving rise to a narrow bandpass instead of a pure low-pass filter configuration of the electromagnetic environment. Measuring one and the same qubit with both setups allows a direct comparison. With the capacitive method about four times faster switching pulses and an increased visibility are achieved. Furthermore, the deliberate engineering of the electromagnetic environment, which minimizes the noise due to the bias circuit, is facilitated. Right at the degeneracy point, the qubit coherence is limited by energy relaxation. We find two main noise contributions. White noise limits the energy relaxation and contributes to the dephasing far from the degeneracy point. $1∕f$ noise is the dominant source of dephasing in the direct vicinity of the optimal point. The influence of $1∕f$ noise is also supported by nonrandom beatings in the Ramsey and spin echo decay traces. Numeric simulations of a coupled qubit-oscillator system indicate that these beatings are due to the resonant interaction of the qubit with at least one pointlike fluctuator, coupled especially strongly to the qubit.

arXiv:0710.4455•Physical Review B•Dec 4, 2007•37 citations
We study a flux qubit consisting of a symmetrical pair of superconducting loops, with two Josephson junctions in each, joined by a common Josephson junction---a `twin' flux qubit. The qubit is capacitively coupled to a transmission line, which allows us to characterize the spectrum of the device by measuring the scattering of propagated electromagnetic waves. We perform a detailed analytical analysis of the double-loop system, revealing its properties, and compare experimental results with numerical simulations. At half-flux quantum bias of both loops, the qubit is protected against global and local magnetic field fluctuations with much less sensitivity to the global field in the second order. The system selection rules allow even-odd transitions and prohibit transitions between even-even or odd-odd levels due to the symmetry of the device.
The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond 0.50.50.5, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.
Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.
We develop and characterize a symmetry-protected superconducting qubit that offers simultaneous exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise.The qubit consists of a Cooper-pair box (CPB) shunted by a superinductor, forming a superconducting loop.Provided the offset charge on the CPB island is an odd number of electrons, the qubit potential corresponds to that of a cos (φ/2) Josephson element, preserving the parity of fluxons in the loop via Aharonov-Casher interference.In this regime, the logical-state wavefunctions reside in disjoint regions of Hilbert space, thereby ensuring protection against energy decay.By switching the protection on, we observe a tenfold increase of the decay time, reaching up to 100 μs.Though the qubit is sensitive to charge noise, the sensitivity is much reduced in comparison with the charge qubit, and the charge-noise-induced dephasing time of the current device exceeds 1 μs.Implementation of full dephasing protection can be achieved in the next-generation devices by combining several cos(φ/2) Josephson elements in a small array.
Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to ∼10%\sim10\%∼10% of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.
A complete analysis of the decoherence properties of a Josephson junction qubit is presented. The qubit is of the flux type and consists of two large loops forming a gradiometer, one small loop, and three Josephson junctions. We develop a complete, quantitative description of the inductances and capacitances of the circuit. Including two stray capacitances makes the quantum mechanical modeling of the system five dimensional. To make the required calculation tractable, we devise a general Born-Oppenheimer approximation which reduces the effective dimensionality in the calculation to one. Contributions to relaxation (T1)({T}_{1})(T1​) and dephasing $({T}_{\ensuremath{\phi}})$ arising from two different control circuits, one coupled to the small loop and one coupled to a large loop, is computed. We explore T1{T}_{1}T1​ and ${T}_{\ensuremath{\phi}}$ along an optimal line in the space of applied fluxes; along this ``S line'' we see significant and rapidly varying contributions to the decoherence parameters, primarily from the circuit coupling to the large loop.
We present a systematic study of the phase coherent dynamics of a superconducting three-Josephson-junction flux qubit. The qubit state is detected with the integrated-pulse method, which is a variant of the pulsed switching-dc-superconducting quantum interference device (SQUID) method. In this scheme, the dc SQUID bias current pulse is applied via a capacitor instead of a resistor, giving rise to a narrow bandpass instead of a pure low-pass filter configuration of the electromagnetic environment. Measuring one and the same qubit with both setups allows a direct comparison. With the capacitive method about four times faster switching pulses and an increased visibility are achieved. Furthermore, the deliberate engineering of the electromagnetic environment, which minimizes the noise due to the bias circuit, is facilitated. Right at the degeneracy point, the qubit coherence is limited by energy relaxation. We find two main noise contributions. White noise limits the energy relaxation and contributes to the dephasing far from the degeneracy point. 1∕f1∕f1∕f noise is the dominant source of dephasing in the direct vicinity of the optimal point. The influence of 1∕f1∕f1∕f noise is also supported by nonrandom beatings in the Ramsey and spin echo decay traces. Numeric simulations of a coupled qubit-oscillator system indicate that these beatings are due to the resonant interaction of the qubit with at least one pointlike fluctuator, coupled especially strongly to the qubit.