Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum-optical technology at the single-photon level

С. А. Бабичев

Published Jan 1, 2006• 0 citations
Publisher

Abstract

This thesis is related to quantum state engineering based on quantum optical states of the light field employing the nonlinear optical processes of 2-photon down-conversion and implementation of these states in quantum protocols.The method of pulsed optical homodyne tomography has been applied to analyze quantum states and to reconstruct their Wigner functions and density matrices.In addition, this method has been used to verify quantum information protocols.A detailed theoretical description of optical state tomography is presented, including the transverse and spectral structure of the generated photon twins, state preparation by conditional masurements, and the homodyne detection process.The experimental realization of quantum state tomography based on homodyne measurements is also shown.A theoretical treatment of a non-ideal homodyne system is provided.The homodyne detection efficiency and the optimum parameter settings are calculated under very general conditions.Various inefficiencies such as imperfect mode-matching, beam splitter imbalance or different detector quantum efficiencies are considered.A realization of several quantum protocols is also shown.A quantum state characterization allows us to use the states in quantum applications.In this project, realizations of quantum protocols such as teleportation, remote state preparation, and quantum finger printing are described.a coherent state , we will generate a "large cat" conditioned on a simultaneous click of detectors A and B. 193 xiv

DOI
10.11575/prism/527

Related papers

Measurement and manipulation of quantum states of travelling light fields

Merlin Cooper

This thesis is concerned with the generation of non-classical quantum states of light, the photon-level manipulation of quantum states and the accurate tomography of both quantum states and quantum processes. In optics, quantum information can be encoded and processed in both discrete and continuous variables. Hybrid approaches combining for example homodyne detection with conditional state preparation and manipulation are gaining increasing prominence. The development and characterization of a time-domain balanced homodyne detector (BHD) is presented. The detector has a bandwidth of 80 MHz, a signal-to-noise ratio of 14.5 dB and an efficiency of 86% making it well-suited to pulse-to-pulse measurement of quantum optical states. The BHD is employed to perform quantum state tomography (QST) of non-classical multi-photon Fock states generated by spontaneous parametric down-conversion. A detailed investigation of the mode-matching between the local oscillator used for homodyne detection and the generated Fock states is presented. The one-, two- and three-photon Fock states are reconstructed with a combined preparation and detection efficiency exceeding 50%. Fock states have a number of applications in quantum state engineering, where non-classical ancilla states and conditional measurements enable photon-level manipulation of quantum states. Fock state filtration (FSF) is investigated - an example of a post-selected beam splitter which is a basic building block for many quantum state engineering protocols. A model is developed incorporating the effect of experimental imperfections. An experimental implementation of a Fock state filter is fully characterized by means of coherent-state quantum process tomography (QPT). The reconstructed process is found to be consistent with the model. The filter preferentially removes the single-photon component from an arbitrary input quantum state. Calibration of optical detectors in the quantum regime is discussed. Quantum detector tomography (QDT) is reviewed and contrasted with a new technique for performing QST with a calibrated detector known as the fitting of data patterns (FDP). The first experimental characterization of a BHD is performed by probing the detector with phase-averaged coherent states. The FDP method is shown to be applicable to the estimation of quantum processes, where a detector response is not assumed - thus demonstrating the versatility of the FDP approach as a new method in the quantum tomography toolbox.

•Jan 1, 2014•0 citations

Design and characterization of wideband balanced homodyne detectors for quantum homodyne tomography

Erick Barrios Barocio

This thesis reports the realization and applications of a versatile wideband balanced homodyne detector operating in the time domain and intended for Quantum Optical Tomography. The detector can work with high repetition rate lasers used for the production and measurement of the electric field quadratures of quantum states of light. Full characterization of the detector by shot-noise measurements and by verifying its capability to reconstruct the density matrix and Wigner function of various states of interest is given. By overcoming photodiodes response mismatch, high frequency electronics issues and by choosing an appropriate optical set-up, a high level of common mode suppression (52.4dB) and a low electronic noise gave a shot-to-electronic noise ratio of I3dB for a Local Oscillator with 6.2 x 108 photons-per-pulse on a ~ 100MHz bandwidth. Results for the characterization of a single-photon Fock state are presented. An average efficiency of 56% was obtained for the generation/detection of the state.

•Jan 1, 2012•0 citations

Continuous-variable optical quantum-state tomography

Alexander I. Lvovsky, Michael G. Raymer

This review covers the latest developments in continuous-variable quantum-state tomography of optical fields and photons, placing a special emphasis on its practical aspects and applications in quantum-information technology. Optical homodyne tomography is reviewed as a method of reconstructing the state of light in a given optical mode. A range of relevant practical topics is discussed, such as state-reconstruction algorithms (with emphasis on the maximum-likelihood technique), the technology of time-domain homodyne detection, mode-matching issues, and engineering of complex quantum states of light. The paper also surveys quantum-state tomography for the transverse spatial state (spatial mode) of the field in the special case of fields containing precisely one photon.

arXiv:quant-ph/0511044•Reviews of Modern Physics•Mar 16, 2009•1,186 citations

Quantum State Reconstruction of the Single-Photon Fock State

Alexander I. Lvovsky, Hauke Hansen, Thomas Aichele +3 more

We have reconstructed the quantum state of optical pulses containing single photons using the method of phase-randomized pulsed optical homodyne tomography. The single-photon Fock state 1> was prepared using conditional measurements on photon pairs born in the process of parametric down-conversion. A probability distribution of the phase-averaged electric field amplitudes with a strongly non-Gaussian shape is obtained with the total detection efficiency of (55+/-1)%. The angle-averaged Wigner function reconstructed from this distribution shows a strong dip reaching classically impossible negative values around the origin of the phase space.

arXiv:quant-ph/0101051•Physical Review Letters•Jul 11, 2001•647 citations

Generation and Detection of Mesoscopic Pulsed States of Light for Quantum Information

Alessia Allevi, Maria Bondani

Generation and measurement of quantum states of the electromagnetic field represent a hot and widely discussed topic in the Physics community, since optical states are useful not only in fundamental experiments but also in several applications in the fields of Quantum Optics and Quantum Information (Bouwmeester et al., 2000). In fact, optical radiation is endowed with relevant characteristics as it travels at maximum possible speed, it is almost unaffected by the interaction with the environment, which in many cases represents an unavoidable decoherence source, and it can be integrated in optoelectronic circuits to implement quantum computing protocols (Sansoni et al., 2010). The possibility of using optical fields in applicative protocols depends on the capability of generating and manipulating optical states that are robust with respect to losses (i.e. that contain a sizeable number of photons) and that can be produced and measured at high rate. For all these reasons, mesoscopic pulsed optical states containing few tens of photons per pulse seem to be the ideal candidates for applications to quantum communication protocols in which each pulse must be addressed individually. Moreover, the problem of generating suitable pulsed states must be considered together with the question of their measurement and characterization. In fact, nowadays we have many types of pulsed-light sources at our disposal, each of them characterized by different pulse durations (from few fs up to few ns), different pulse-repetition rates (from few Hz to 100 MHz) and a wide range of energies per pulse (from few nJ to several J). However, not all these pulsed light can be easily measured. In the mesoscopic intensity regime, for example, detectors endowed with photon-number resolution are required so as to determine shot-by-shot photon numbers or, at least, to characterize some features of the optical states. In fact, full characterization of the optical state, obtained e.g. by evaluating its Wigner function, can be achieved with optical homodyne tomography (OHT) (Raymer, 1997), a technique that over the years has proved its effectiveness in reconstructing both classical and quantum states, even if further optimizations are needed in the case of pulsed fields (Zavatta et al., 2006). Direct detection schemes are an alternative to OHT in all the cases in which knowing the statistics of detected photons is sufficient to characterize the signal state, as demonstrated in the pioneering work of Arecchi (Arecchi, 1965). Obviously, the implementation of a direct detection scheme requires a proper choice of the detector, the development of a calibration 11

InTech eBooks•Nov 14, 2011•2 citations

Tomographic reconstruction of the single-photon Fock state by high-frequency homodyne detection

Alessandro Zavatta, Silvia Viciani, Marco Bellini

A single-photon Fock state has been generated by means of conditional preparation from a two-photon state emitted in the process of spontaneous parametric down-conversion. A recently developed high-frequency homodyne tomography technique has been used to completely characterize the Fock state by means of a pulse-to-pulse analysis of the detectors' difference photocurrent. The density matrix elements of the generated state have been retrieved with a final detection efficiency of about 57%. A comparison has been performed between the phase-averaged tomographic reconstructions of the Wigner function as obtained from the measured density-matrix elements and from a direct Abel transform of the homodyne data. The ability of our system to work at the full repetition rate of the pulsed laser $(82\phantom{\rule{0.3em}{0ex}}\mathrm{MHz})$ substantially simplifies the detection scheme, allowing for more ``exotic'' quantum states to be generated and analyzed.

arXiv:quant-ph/0406090•Physical Review A•Nov 23, 2004•140 citations
This thesis is related to quantum state engineering based on quantum optical states of the light field employing the nonlinear optical processes of 2-photon down-conversion and implementation of these states in quantum protocols.The method of pulsed optical homodyne tomography has been applied to analyze quantum states and to reconstruct their Wigner functions and density matrices.In addition, this method has been used to verify quantum information protocols.A detailed theoretical description of optical state tomography is presented, including the transverse and spectral structure of the generated photon twins, state preparation by conditional masurements, and the homodyne detection process.The experimental realization of quantum state tomography based on homodyne measurements is also shown.A theoretical treatment of a non-ideal homodyne system is provided.The homodyne detection efficiency and the optimum parameter settings are calculated under very general conditions.Various inefficiencies such as imperfect mode-matching, beam splitter imbalance or different detector quantum efficiencies are considered.A realization of several quantum protocols is also shown.A quantum state characterization allows us to use the states in quantum applications.In this project, realizations of quantum protocols such as teleportation, remote state preparation, and quantum finger printing are described.a coherent state , we will generate a "large cat" conditioned on a simultaneous click of detectors A and B. 193 xiv
This thesis is concerned with the generation of non-classical quantum states of light, the photon-level manipulation of quantum states and the accurate tomography of both quantum states and quantum processes. In optics, quantum information can be encoded and processed in both discrete and continuous variables. Hybrid approaches combining for example homodyne detection with conditional state preparation and manipulation are gaining increasing prominence. The development and characterization of a time-domain balanced homodyne detector (BHD) is presented. The detector has a bandwidth of 80 MHz, a signal-to-noise ratio of 14.5 dB and an efficiency of 86% making it well-suited to pulse-to-pulse measurement of quantum optical states. The BHD is employed to perform quantum state tomography (QST) of non-classical multi-photon Fock states generated by spontaneous parametric down-conversion. A detailed investigation of the mode-matching between the local oscillator used for homodyne detection and the generated Fock states is presented. The one-, two- and three-photon Fock states are reconstructed with a combined preparation and detection efficiency exceeding 50%. Fock states have a number of applications in quantum state engineering, where non-classical ancilla states and conditional measurements enable photon-level manipulation of quantum states. Fock state filtration (FSF) is investigated - an example of a post-selected beam splitter which is a basic building block for many quantum state engineering protocols. A model is developed incorporating the effect of experimental imperfections. An experimental implementation of a Fock state filter is fully characterized by means of coherent-state quantum process tomography (QPT). The reconstructed process is found to be consistent with the model. The filter preferentially removes the single-photon component from an arbitrary input quantum state. Calibration of optical detectors in the quantum regime is discussed. Quantum detector tomography (QDT) is reviewed and contrasted with a new technique for performing QST with a calibrated detector known as the fitting of data patterns (FDP). The first experimental characterization of a BHD is performed by probing the detector with phase-averaged coherent states. The FDP method is shown to be applicable to the estimation of quantum processes, where a detector response is not assumed - thus demonstrating the versatility of the FDP approach as a new method in the quantum tomography toolbox.
This thesis reports the realization and applications of a versatile wideband balanced homodyne detector operating in the time domain and intended for Quantum Optical Tomography. The detector can work with high repetition rate lasers used for the production and measurement of the electric field quadratures of quantum states of light. Full characterization of the detector by shot-noise measurements and by verifying its capability to reconstruct the density matrix and Wigner function of various states of interest is given. By overcoming photodiodes response mismatch, high frequency electronics issues and by choosing an appropriate optical set-up, a high level of common mode suppression (52.4dB) and a low electronic noise gave a shot-to-electronic noise ratio of I3dB for a Local Oscillator with 6.2 x 108 photons-per-pulse on a ~ 100MHz bandwidth. Results for the characterization of a single-photon Fock state are presented. An average efficiency of 56% was obtained for the generation/detection of the state.
This review covers the latest developments in continuous-variable quantum-state tomography of optical fields and photons, placing a special emphasis on its practical aspects and applications in quantum-information technology. Optical homodyne tomography is reviewed as a method of reconstructing the state of light in a given optical mode. A range of relevant practical topics is discussed, such as state-reconstruction algorithms (with emphasis on the maximum-likelihood technique), the technology of time-domain homodyne detection, mode-matching issues, and engineering of complex quantum states of light. The paper also surveys quantum-state tomography for the transverse spatial state (spatial mode) of the field in the special case of fields containing precisely one photon.
We have reconstructed the quantum state of optical pulses containing single photons using the method of phase-randomized pulsed optical homodyne tomography. The single-photon Fock state 1> was prepared using conditional measurements on photon pairs born in the process of parametric down-conversion. A probability distribution of the phase-averaged electric field amplitudes with a strongly non-Gaussian shape is obtained with the total detection efficiency of (55+/-1)%. The angle-averaged Wigner function reconstructed from this distribution shows a strong dip reaching classically impossible negative values around the origin of the phase space.
Generation and measurement of quantum states of the electromagnetic field represent a hot and widely discussed topic in the Physics community, since optical states are useful not only in fundamental experiments but also in several applications in the fields of Quantum Optics and Quantum Information (Bouwmeester et al., 2000). In fact, optical radiation is endowed with relevant characteristics as it travels at maximum possible speed, it is almost unaffected by the interaction with the environment, which in many cases represents an unavoidable decoherence source, and it can be integrated in optoelectronic circuits to implement quantum computing protocols (Sansoni et al., 2010). The possibility of using optical fields in applicative protocols depends on the capability of generating and manipulating optical states that are robust with respect to losses (i.e. that contain a sizeable number of photons) and that can be produced and measured at high rate. For all these reasons, mesoscopic pulsed optical states containing few tens of photons per pulse seem to be the ideal candidates for applications to quantum communication protocols in which each pulse must be addressed individually. Moreover, the problem of generating suitable pulsed states must be considered together with the question of their measurement and characterization. In fact, nowadays we have many types of pulsed-light sources at our disposal, each of them characterized by different pulse durations (from few fs up to few ns), different pulse-repetition rates (from few Hz to 100 MHz) and a wide range of energies per pulse (from few nJ to several J). However, not all these pulsed light can be easily measured. In the mesoscopic intensity regime, for example, detectors endowed with photon-number resolution are required so as to determine shot-by-shot photon numbers or, at least, to characterize some features of the optical states. In fact, full characterization of the optical state, obtained e.g. by evaluating its Wigner function, can be achieved with optical homodyne tomography (OHT) (Raymer, 1997), a technique that over the years has proved its effectiveness in reconstructing both classical and quantum states, even if further optimizations are needed in the case of pulsed fields (Zavatta et al., 2006). Direct detection schemes are an alternative to OHT in all the cases in which knowing the statistics of detected photons is sufficient to characterize the signal state, as demonstrated in the pioneering work of Arecchi (Arecchi, 1965). Obviously, the implementation of a direct detection scheme requires a proper choice of the detector, the development of a calibration 11
A single-photon Fock state has been generated by means of conditional preparation from a two-photon state emitted in the process of spontaneous parametric down-conversion. A recently developed high-frequency homodyne tomography technique has been used to completely characterize the Fock state by means of a pulse-to-pulse analysis of the detectors' difference photocurrent. The density matrix elements of the generated state have been retrieved with a final detection efficiency of about 57%. A comparison has been performed between the phase-averaged tomographic reconstructions of the Wigner function as obtained from the measured density-matrix elements and from a direct Abel transform of the homodyne data. The ability of our system to work at the full repetition rate of the pulsed laser (82MHz)(82\phantom{\rule{0.3em}{0ex}}\mathrm{MHz})(82MHz) substantially simplifies the detection scheme, allowing for more ``exotic'' quantum states to be generated and analyzed.