Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)

SMMW detectors; quasiparticle mixer and Josephson mixer using superconducting tunnel junction

Syozo Imai, Seizo Morita, Yosihisa Takeuti, Nobuo Mikoshiba

Published Dec 1, 1985• 0 citations
Publisher

Abstract

There are growing needs for low noise and wide band receiver in SMMW range, e.g., in radio astronomy [1]. Hitherto, Schottky diode mixer, Josephson mixer using point contact microbridges, and quasiparticle mixer using superconducting tunnel junctions have been investigated intensively in MMW range. Over wide SMMW range, however, only Schottky diode mixer was tested and used at present. Quasiparticle mixer now confronts a basic difficulty for operation in SMMW range, although it has very high potential as a SMMW mixer. On the otherhand, potential of Josephson mixer using microbridges is unclear.

DOI
10.1109/irmm.1985.9126591

Related papers

Superconducting detectors for infrared and millimeter waves

Paul L. Richards

Quasiparticle and Josephson tunneling currents in superconducting tunnel junctions provide nonlinear low-noise response up to terahertz frequencies. Many types of direct detector heterodyne mixer and parametric amplifier based on these effects have been explored. Only the SIS quasiparticle mixer has been sufficiently competitive to find significant applications. These mixers can have noise approaching the quantum limit TN = ℏω/k and gain larger than 10 dB. They are used at a number of observatories for molecular line radio astronomy at millimeter wavelengths. Similar applications at submillimeter wavelengths are beginning.

Conference on Lasers and Electro-Optics•Apr 25, 1988•0 citations

Low-Noise Superconducting Mixers for the Terahertz Frequency Range

Victor Y. Belitsky, Serguei Cherednichenko, Dag Winkler

This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.

CRC Press eBooks•May 17, 2022•1 citation

ミリ波・サブミリ波検出器

Kazuo Fujisawa

In this report, Josephson junction detectors for millimeter and submillimeter waves are surveyed. Emphasis is placed on heterodyne detectors (mixers). Others are briefly referred to, such as video detectors, bolometers, quasiparticle mixers and parametric amplifiers. Also, three kinds of Josephson junctions for detector use are mentioned and brief comments are given on them. These are tunnel junctions, thin film microbridges and point contacts.Thermally cyclable oxide barrier tunnel junctions have been obtained and used as low noise quasiparticle mixers at 115GHz. They have lower noise temperatures compared to Josephson effect mixers, but the receiver noise temperatures are not lowered owing to their lower conversion efficiencies. Thin film microbridges suffer from low junction resistances and also from heating effects caused by d.c. bias supply and r.f. incident power. There seems to exist many problems to be overcome in order to make good submillimeter wave detectors by tunnel junctions or microbridges.Point contacts are now widely used as sensitive detectors for millimeter and submillimeter waves. Although there exist difficulties for making rugged and thermally cyclable point contacts, the techniques for making them have made considerable progress, and a new construction of detector mount has appeared, which brought a low noise mixer at 115GHz thermally cyclable.It is shown that the sensitivity of video detectors decreases as proportional to the inverse square of frequency. So, for submillimeter waves, video detectors are inferior to superconducting bolometers.Recent progress in heterodyne detectors (fundamental and harmonic mixers) are touched on. They are superior to Shottky diode mixers in that they have much smaller NEP's and much higher conversion efficiencies (especially in harmonic mixers), and also in that they operate with much smaller LO power. Experimental curves of IF output power v.s. bias voltage are given for harmonic mixers with harmonic number N=7 and N=10. It is noted that harmonic mixers with even harmonic number are preferable, because they can operate at zero bias voltage. Among them, low even numbers 2 or 4 are recommended in regards to good conversion efficiency.By using Josephson junctions, a peculiar parametric operation is possible, namely doubly degenerate mode. This mode operates under zero d.c. bias by choosing pump frequency as 2ωp=ωs+ωi, ωp-ωs-ωi. Zero bias operation allows the adoption of microbridge arrays. A parametric amplifier with 160 microbridge arrays was built at 33GHz, and showed amplifier gain of 15dB and noise temperature of 20K.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 1980•0 citations

Superconducting low noise receivers

Arnold H. Silver

It is now possible to develop a new class of receivers for the millimeter and shorter wavelength region by application of Josephson and other electron tunneling phenomena which occur in superconducting materials. This development represents a major advance in receiver sensitivity and will be applicable over a wide frequency interval. Operating in the conventional heterodyne detection mode this receiver has a theoretical noise temperature as low as 20 Kelvin at 100 GHz. Three basic components required are: a superconductor-semiconductor Schottky diode mixer; a Josephson junction phase-locked multiplier local oscillator; and a Josephson parametric amplifier. The component and system design and limiting factors will be discussed.

IEEE Transactions on Magnetics•Mar 1, 1975•11 citations

Design considerations for high-gain SIS mixers

Larry R. D’Addario, Michael W. Cromar, F L Lloyd

It has been shown both theoretically [1] and experimentally [2,3] that the very sharp nonlinearity in the conductance of superconducting tunnel junctions can be used to implement millimeter wavelength mixers having high gain and very low noise, leading to the possibility of receivers that achieve the quantum noise limit. The junctions involved contain a thin insulating barrier between two superconductors, and are thus known as superconductor-insulator-superconductor (SIS) junctions. They are physically identical to Josephson junctions, but in this application the conductance is via the tunneling of quasiparticles (unpaired electrons), and so the Josephson effect is not involved.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Dec 1, 1985•0 citations

Dayem-Martin (SIS tunnel junction) mixers for low noise heterodyne receivers

Tom G. Phillips, D. P. Woody, G. J. Dolan +2 more

Superconducting thin film tunnel junctions of small area (.1 \rightarrow 1μm2) have properties which make them suitable for high frequency (≳100 GHz) heterodyne receivers. Both pair and single quasiparticle tunneling is present in these devices, but it is found that the mixing due to the pair effect is apparently excessively noisy, whereas the single quasiparticle effect has a low noise character which gives hope for near quantum limited performance. The physical effect involved is photon assisted quasiparticle tunneling and was first observed by Dayem and Martin[1]. We have made laboratory tests at 115 and 230 GHz which gave single side band (SSB) mixer noise temperatures of 60 and 300 K respectively. Also we have fabricated a 90-140 GHz receiver for the Caltech Owens Valley Radio Observatory which has an overall receiver noise temperature of about 300 K (SSB).

IEEE Transactions on Magnetics•Jan 1, 1981•52 citations
There are growing needs for low noise and wide band receiver in SMMW range, e.g., in radio astronomy [1]. Hitherto, Schottky diode mixer, Josephson mixer using point contact microbridges, and quasiparticle mixer using superconducting tunnel junctions have been investigated intensively in MMW range. Over wide SMMW range, however, only Schottky diode mixer was tested and used at present. Quasiparticle mixer now confronts a basic difficulty for operation in SMMW range, although it has very high potential as a SMMW mixer. On the otherhand, potential of Josephson mixer using microbridges is unclear.
Quasiparticle and Josephson tunneling currents in superconducting tunnel junctions provide nonlinear low-noise response up to terahertz frequencies. Many types of direct detector heterodyne mixer and parametric amplifier based on these effects have been explored. Only the SIS quasiparticle mixer has been sufficiently competitive to find significant applications. These mixers can have noise approaching the quantum limit TN = ℏω/k and gain larger than 10 dB. They are used at a number of observatories for molecular line radio astronomy at millimeter wavelengths. Similar applications at submillimeter wavelengths are beginning.
This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.
In this report, Josephson junction detectors for millimeter and submillimeter waves are surveyed. Emphasis is placed on heterodyne detectors (mixers). Others are briefly referred to, such as video detectors, bolometers, quasiparticle mixers and parametric amplifiers. Also, three kinds of Josephson junctions for detector use are mentioned and brief comments are given on them. These are tunnel junctions, thin film microbridges and point contacts.Thermally cyclable oxide barrier tunnel junctions have been obtained and used as low noise quasiparticle mixers at 115GHz. They have lower noise temperatures compared to Josephson effect mixers, but the receiver noise temperatures are not lowered owing to their lower conversion efficiencies. Thin film microbridges suffer from low junction resistances and also from heating effects caused by d.c. bias supply and r.f. incident power. There seems to exist many problems to be overcome in order to make good submillimeter wave detectors by tunnel junctions or microbridges.Point contacts are now widely used as sensitive detectors for millimeter and submillimeter waves. Although there exist difficulties for making rugged and thermally cyclable point contacts, the techniques for making them have made considerable progress, and a new construction of detector mount has appeared, which brought a low noise mixer at 115GHz thermally cyclable.It is shown that the sensitivity of video detectors decreases as proportional to the inverse square of frequency. So, for submillimeter waves, video detectors are inferior to superconducting bolometers.Recent progress in heterodyne detectors (fundamental and harmonic mixers) are touched on. They are superior to Shottky diode mixers in that they have much smaller NEP's and much higher conversion efficiencies (especially in harmonic mixers), and also in that they operate with much smaller LO power. Experimental curves of IF output power v.s. bias voltage are given for harmonic mixers with harmonic number N=7 and N=10. It is noted that harmonic mixers with even harmonic number are preferable, because they can operate at zero bias voltage. Among them, low even numbers 2 or 4 are recommended in regards to good conversion efficiency.By using Josephson junctions, a peculiar parametric operation is possible, namely doubly degenerate mode. This mode operates under zero d.c. bias by choosing pump frequency as 2ωp=ωs+ωi, ωp-ωs-ωi. Zero bias operation allows the adoption of microbridge arrays. A parametric amplifier with 160 microbridge arrays was built at 33GHz, and showed amplifier gain of 15dB and noise temperature of 20K.
It is now possible to develop a new class of receivers for the millimeter and shorter wavelength region by application of Josephson and other electron tunneling phenomena which occur in superconducting materials. This development represents a major advance in receiver sensitivity and will be applicable over a wide frequency interval. Operating in the conventional heterodyne detection mode this receiver has a theoretical noise temperature as low as 20 Kelvin at 100 GHz. Three basic components required are: a superconductor-semiconductor Schottky diode mixer; a Josephson junction phase-locked multiplier local oscillator; and a Josephson parametric amplifier. The component and system design and limiting factors will be discussed.
It has been shown both theoretically [1] and experimentally [2,3] that the very sharp nonlinearity in the conductance of superconducting tunnel junctions can be used to implement millimeter wavelength mixers having high gain and very low noise, leading to the possibility of receivers that achieve the quantum noise limit. The junctions involved contain a thin insulating barrier between two superconductors, and are thus known as superconductor-insulator-superconductor (SIS) junctions. They are physically identical to Josephson junctions, but in this application the conductance is via the tunneling of quasiparticles (unpaired electrons), and so the Josephson effect is not involved.
Superconducting thin film tunnel junctions of small area (.1 \rightarrow 1μm2) have properties which make them suitable for high frequency (≳100 GHz) heterodyne receivers. Both pair and single quasiparticle tunneling is present in these devices, but it is found that the mixing due to the pair effect is apparently excessively noisy, whereas the single quasiparticle effect has a low noise character which gives hope for near quantum limited performance. The physical effect involved is photon assisted quasiparticle tunneling and was first observed by Dayem and Martin[1]. We have made laboratory tests at 115 and 230 GHz which gave single side band (SSB) mixer noise temperatures of 60 and 300 K respectively. Also we have fabricated a 90-140 GHz receiver for the Caltech Owens Valley Radio Observatory which has an overall receiver noise temperature of about 300 K (SSB).