Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Design and error-rate evaluation of RSFQ logic gates comprising a toggle storage loop

Koki Yamazaki, Hiroshi Shimada, Yoshinao Mizugaki

Published Jul 1, 2020• 1 citation
Publisher

Abstract

Abstract We propose an RSFQ digital cell with a toggle storage loop structure for logical NOT operation. Logical NOT operation is a fundamental function of digital circuitry, and hence, it had better be realized with less devices. We demonstrate a simpler and area-halved NOT gate designed as a 40 x 80 μm2 cell, which follows to cell-based design methodology. Test circuits were fabricated using a 2.5kA/cm2 Nb integration process. Measurements were executed in a liquid helium bath. We confirmed that the NOT gate comprising a toggle storage loop worked correctly. The error-rate of the NOT gate was less than 8.33 x 10−6 in the bias voltage range from 2.111 to 3.165 mV, which corresponded to the bias margin from 84.4% to 126.6% of the nominal bias voltage (2.5 mV). We also present that NOR and NAND logic gates can be configured using a toggle storage loop.

DOI
10.1088/1742-6596/1590/1/012042

Related papers

Rapid Single-Flux-Quantum NOR Logic Gate Realized through the Use of Toggle Storage Loop

Yoshinao Mizugaki, Koki Yamazaki, Hiroshi Shimada

Recently, we demonstrated a rapid-single-flux-quantum NOT gate comprising a toggle storage loop. In this paper, we present our design and operation of a NOR gate that is a straightforward extension of the NOT gate by attaching a confluence buffer. Parameter margins wider than ±28% were confirmed in simulation. Functional tests using Nb integrated circuits demonstrated correct NOR operation with a bias margin of ±21%.

IEICE Transactions on Electronics•Apr 12, 2020•1 citation

Development of Program counter through the optimization of RSFQ Toggle Flip-Flop

Baek Seung Hun, Kang Joon Hee, Kim Se Hoon +1 more

We has designed, fabricated, and measured a Single flux quantum (SFQ) toggle flip-flop (TFF). The TFF is widely used in superconductive digital electronics circuits. Many digital devices, such as frequency counter, counting ADC and program counter be used TFF Specially, a program counter may be constructed based on TFF We have designed the newly TFF and obtained high bias margins on test. In this work, we used two circuit simulation tools, WRspice and Julia, as circuit optimization tools. We used XIC for a layout tool. Newly designed TFF had minimum bias margins of +/- and maximum bias margins of +/-(enhanced from +/- ). The designed circuits were fabricated by using Nb technology The test results showed that the re-optimized TFF operated correctly on 100kHz and had a very wide bias margins of +/- .

Progress in Superconductivity and Cryogenics•Jan 1, 2005•1 citation

Evaluation of a True Random Number Generator Utilizing Timing Jitters in RSFQ Logic Circuits

Kenta SATO, Naonori Sega, Yuta Somei +3 more

We experimentally evaluated random number sequences generated by a superconducting hardware random number generator composed of a Josephson-junction oscillator, a rapid-single-flux-quantum (RSFQ) toggle flip-flop (TFF), and an RSFQ AND gate. Test circuits were fabricated using a 10 kA/cm2 Nb/AlOx/Nb integration process. Measurements were conducted in a liquid helium bath. The random numbers were generated for a trigger frequency of 500 kHz under the oscillating Josephson-junction at 29 GHz. 26 random number sequences of 20 kb length were evaluated for bias voltages between 2.0 and 2.7 mV. The NIST FIPS PUBS 140-2 tests were used for the evaluation. 100% pass rates were confirmed at the bias voltages of 2.5 and 2.6 mV. We found that the Monobit test limited the pass rates. As numerical simulations suggested, a detailed evaluation for the probability of obtaining “1” demonstrated the monotonical dependence on the bias voltage.

IEICE Transactions on Electronics•Jan 18, 2022•5 citations

Design and implementation of a RSFQ superconductive digital electronics cell library

Rodwell S. Bakolo

ENGLISH ABSTRACT: Rapid Single Flux Quantum (RSFQ) cells are key in the design of complex and applicable RSFQ electronic circuits. These cells are low-level circuit elements that are used repeatedly to build larger, applicable RSFQ circuitry. Making these cells simple to layout and manufacture, but reliable for extensive use demands a careful development process for RSFQ cells. Cell functionality is verified through simulations, thereafter the cell is laid out in special software packages. Inductance of on-chip superconductor structures is extracted through careful modelling with numerical field solver software. A cell library has been developed by incorporating existing or published cells after further analysis and optimization, as well as developing new cells. Cells that have been adapted into the library include the Josephson transmission line (JTL), Splitter, Merger, D-Flip Flop (DFF), T-Flip Flop (TFF), NOT, AND, OR and XOR, DC-SFQ and SFQ-DC and PTL Driver and Receivers. New cells include NOR, NAND and XNOR. The cells were designed for the IPHT’s RSFQ1D 1kA/cmª and Hypres’ 4.5kA/cmª processes. The cells in the library have good bias current operating margins obtained through simulations (> ±26%). All cells have all the parameters listed in the thesis including extracted inductance values. In order to have a complete and verified RSFQ cell library, cells have been sent for fabrication at IPHT and Hypres facilities. These cells can now be tested on-chip, in the laboratory, to establish functionality and practical bias current margins. All test signal patterns and bias currents required for testing are defined to allow co-workers or collaborators to test the cells.

•Dec 1, 2011•1 citation

A cell-based design approach for RSFQ circuits based on binary decision diagram

Junichi Koshiyama, Nobuyuki Yoshikawa

We have proposed a cell-based design approach for rapid single flux quantum (RSFQ) logic circuits. In our design approach, a binary decision diagram (BDD) is used for representation of logical functions in order to reduce the number of gates. We have made a standard cell library, which is composed of only five basic cells. We add one-junction Josephson transmission line (JTL) to the edge of the input and the output node of some basic cells, by which no deterioration of the DC bias margin is observed for the connection of each cell. In the layout level, the size and the position of the input/output node of each cell are equalized. The standard cell circuits were fabricated by NEC 2.5 kA/cm/sup 2/ and Hypres 1.0 kA/cm/sup 2/ Nb standard process and they were tested at low speed.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•6 citations

RSFQ Circuitry Using Intrinsic π\piπ -Phase Shifts

Thomas Ortlepp, Ariando Ariando, Olaf Mielke +6 more

The latching of temporary data is essential in the rapid single flux quantum (RSFQ) electronics family. Its pulse-driven nature requires two or more stable states in almost all cells. Storage loops must be designed to have exactly two stable states for binary data representation. In conventional RSFQ such loops are constructed to have two stable states, e.g. by using asymmetric bias currents. This bistability naturally occurs when phase-shifting elements are included in the circuitry, such as π-Josephson junctions or a π-phase shift associated with an unconventional (d-wave) order parameter symmetry. Both approaches can be treated completely analogously, giving the same results. We have demonstrated for the first time the correct operation of a logic circuit, a toggle-flip-flop, using rings with an intrinsic π-phase shift (π-rings) based on hybrid high-Tcto low-TcJosephson junctions. Because of their natural bistability these π-rings improve the device symmetry, enhance operation margins and alleviate the need for bias current lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•30 citations
Abstract We propose an RSFQ digital cell with a toggle storage loop structure for logical NOT operation. Logical NOT operation is a fundamental function of digital circuitry, and hence, it had better be realized with less devices. We demonstrate a simpler and area-halved NOT gate designed as a 40 x 80 μm2 cell, which follows to cell-based design methodology. Test circuits were fabricated using a 2.5kA/cm2 Nb integration process. Measurements were executed in a liquid helium bath. We confirmed that the NOT gate comprising a toggle storage loop worked correctly. The error-rate of the NOT gate was less than 8.33 x 10−6 in the bias voltage range from 2.111 to 3.165 mV, which corresponded to the bias margin from 84.4% to 126.6% of the nominal bias voltage (2.5 mV). We also present that NOR and NAND logic gates can be configured using a toggle storage loop.
We has designed, fabricated, and measured a Single flux quantum (SFQ) toggle flip-flop (TFF). The TFF is widely used in superconductive digital electronics circuits. Many digital devices, such as frequency counter, counting ADC and program counter be used TFF Specially, a program counter may be constructed based on TFF We have designed the newly TFF and obtained high bias margins on test. In this work, we used two circuit simulation tools, WRspice and Julia, as circuit optimization tools. We used XIC for a layout tool. Newly designed TFF had minimum bias margins of +/- and maximum bias margins of +/-(enhanced from +/- ). The designed circuits were fabricated by using Nb technology The test results showed that the re-optimized TFF operated correctly on 100kHz and had a very wide bias margins of +/- .
We experimentally evaluated random number sequences generated by a superconducting hardware random number generator composed of a Josephson-junction oscillator, a rapid-single-flux-quantum (RSFQ) toggle flip-flop (TFF), and an RSFQ AND gate. Test circuits were fabricated using a 10 kA/cm2 Nb/AlOx/Nb integration process. Measurements were conducted in a liquid helium bath. The random numbers were generated for a trigger frequency of 500 kHz under the oscillating Josephson-junction at 29 GHz. 26 random number sequences of 20 kb length were evaluated for bias voltages between 2.0 and 2.7 mV. The NIST FIPS PUBS 140-2 tests were used for the evaluation. 100% pass rates were confirmed at the bias voltages of 2.5 and 2.6 mV. We found that the Monobit test limited the pass rates. As numerical simulations suggested, a detailed evaluation for the probability of obtaining “1” demonstrated the monotonical dependence on the bias voltage.
ENGLISH ABSTRACT: Rapid Single Flux Quantum (RSFQ) cells are key in the design of complex and applicable RSFQ electronic circuits. These cells are low-level circuit elements that are used repeatedly to build larger, applicable RSFQ circuitry. Making these cells simple to layout and manufacture, but reliable for extensive use demands a careful development process for RSFQ cells. Cell functionality is verified through simulations, thereafter the cell is laid out in special software packages. Inductance of on-chip superconductor structures is extracted through careful modelling with numerical field solver software. A cell library has been developed by incorporating existing or published cells after further analysis and optimization, as well as developing new cells. Cells that have been adapted into the library include the Josephson transmission line (JTL), Splitter, Merger, D-Flip Flop (DFF), T-Flip Flop (TFF), NOT, AND, OR and XOR, DC-SFQ and SFQ-DC and PTL Driver and Receivers. New cells include NOR, NAND and XNOR. The cells were designed for the IPHT’s RSFQ1D 1kA/cmª and Hypres’ 4.5kA/cmª processes. The cells in the library have good bias current operating margins obtained through simulations (> ±26%). All cells have all the parameters listed in the thesis including extracted inductance values. In order to have a complete and verified RSFQ cell library, cells have been sent for fabrication at IPHT and Hypres facilities. These cells can now be tested on-chip, in the laboratory, to establish functionality and practical bias current margins. All test signal patterns and bias currents required for testing are defined to allow co-workers or collaborators to test the cells.
We have proposed a cell-based design approach for rapid single flux quantum (RSFQ) logic circuits. In our design approach, a binary decision diagram (BDD) is used for representation of logical functions in order to reduce the number of gates. We have made a standard cell library, which is composed of only five basic cells. We add one-junction Josephson transmission line (JTL) to the edge of the input and the output node of some basic cells, by which no deterioration of the DC bias margin is observed for the connection of each cell. In the layout level, the size and the position of the input/output node of each cell are equalized. The standard cell circuits were fabricated by NEC 2.5 kA/cm/sup 2/ and Hypres 1.0 kA/cm/sup 2/ Nb standard process and they were tested at low speed.
The latching of temporary data is essential in the rapid single flux quantum (RSFQ) electronics family. Its pulse-driven nature requires two or more stable states in almost all cells. Storage loops must be designed to have exactly two stable states for binary data representation. In conventional RSFQ such loops are constructed to have two stable states, e.g. by using asymmetric bias currents. This bistability naturally occurs when phase-shifting elements are included in the circuitry, such as π-Josephson junctions or a π-phase shift associated with an unconventional (d-wave) order parameter symmetry. Both approaches can be treated completely analogously, giving the same results. We have demonstrated for the first time the correct operation of a logic circuit, a toggle-flip-flop, using rings with an intrinsic π-phase shift (π-rings) based on hybrid high-Tcto low-TcJosephson junctions. Because of their natural bistability these π-rings improve the device symmetry, enhance operation margins and alleviate the need for bias current lines.