Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Kódování a efektivita LDPC kódů

Andrew R. Kozlik

Published Sep 19, 2011• 0 citations
OpenAlex

Abstract

Low-density parity-check (LDPC) codes are linear error correcting codes which are capable of performing near channel capacity. Furthermore, they admit efficient decoding algorithms that provide near optimum performance. Their main disadvantage is that most LDPC codes have relatively complex encoders. In this thesis, we begin by giving a detailed discussion of the sum-product decoding algorithm, we then study the performance of LDPC codes on the binary erasure channel under sum-product decoding to obtain criteria for the design of codes that allow reliable transmission at rates arbitrarily close to channel capacity. Using these criteria we show how such codes are designed. We then present experimental results and compare them with theoretical predictions. Finally, we provide an overview of several approaches to solving the complex encoder problem.

Related papers

Linear-time encoding and decoding of low-density parity-check codes

Mikael Simberg

Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented.

•Jan 20, 2015•0 citations

Düşük yoğunluklu eşlik denetim kodları için kod çözme algoritmalarının karşılaştırılması.

Kolaylı, Mert

Low-density parity-check (LDPC) codes are a subclass of linear block codes. These codes have parity-check matrices in which the ratio of the non-zero elements to all elements is low. This property is exploited in defining low complexity decoding algorithms. Low-density parity-check codes have good distance properties and error correction capability near Shannon limits. In this thesis, the sum-product and the bit-flip decoding algorithms for low-density parity-check codes are implemented on Intel Pentium M 1,86 GHz processor using the software called MATLAB. Simulations for the two decoding algorithms are made over additive white gaussian noise (AWGN) channel changing the code parameters like the information rate, the blocklength of the code and the column weight of the parity-check matrix. Performance comparison of the two decoding algorithms are made according to these simulation results. As expected, the sum-product algorithm, which is based on soft-decision decoding, outperforms the bit-flip algorithm, which depends on hard-decision decoding. Our simulations show that the performance of LDPC codes improves with increasing blocklength and number of iterations for both decoding algorithms. Since the sum-product algorithm has lower error-floor characteristics, increasing the number of iterations is more effective for the sum-product decoder compared to the bit-flip decoder. By having better BER performance for lower information rates, the bit-flip algorithm performs according to the expectations; however, the performance of the sum-product decoder deteriorates for information rates below 0.5 instead of improving. By irregular construction of LDPC codes, a performance improvement is observed especially for low SNR values.

•Jan 1, 2006•0 citations

Improving the Error Floor Performance of LDCP Codes with Better Codes and Better Decoders

Dung Viet Nguyen

Error correcting codes are used in virtually all communication systems to ensure reliable transmission of information. In 1948, Shannon established an upper-bound on the maximum rate at which information can be transmitted reliably over a noisy channel. Reliably transmitting information with a rate close to this theoretical limit, known as the channel capacity, has been the goal of channel coding scientists for the last five decades. The rediscovery of low-density parity-check (LDPC) codes in the 1990s added much-renewed excitement in the coding community. LDPC codes are interesting because they can approach channel capacity under sub-optimum decoding algorithms whose complexity is linear in the code length. Unsurprisingly, LDPC codes quickly attained their popularity in practical applications such as magnetic storage, wireless and optical communications. One, if not the most, important and challenging problem in LDPC code research is the study and analysis of the error floor phenomenon. This phenomenon is described as an abrupt degradation in the frame error rate performance of LDPC codes in the high signal-to-noise ratio region. Error floor is harmful because its presence prevents the LDPC decoder from reaching very low probability of decoding failure, an important requirement for many applications. Not long after the rediscovery of LDPC codes, scientists established that error floor is caused by certain harmful structures, most commonly known as trapping sets, in the Tanner representation of a code. Since then, the study of error floor mostly consists of three major problems: 1) estimating error floor; 2) constructing LDPC codes with low error floor and 3) designing decoders that are less susceptible to error floor. Although some parts of this dissertation can be used as important elements in error floor estimation, our main contributions are a novel method for constructing LDPC codes with low error floor and a novel class of low complexity decoding algorithms that can collectively alleviate error floor. These contributions are summarized as follows. A method to construct LDPC codes with low error floors on the binary symmetric channel is presented. Codes are constructed so that their Tanner graphs are free of certain small trapping sets. These trapping sets are selected from the Trapping Set Ontology for the Gallager A/B decoder. They are selected based on their relative harmfulness for a given decoding algorithm. We evaluate the relative harmfulness of different trapping sets for the sum-product algorithm by using the topological relations among them and by analyzing the decoding failures on one trapping set in the presence or absence of other trapping sets. We apply this method to construct structured LDPC codes. To facilitate the discussion, we give a new description of structured LDPC codes whose parity-check matrices are arrays of permutation matrices. This description uses Latin squares to define a set of permutation matrices that have disjoint support and to derive a simple necessary and sufficient condition for the Tanner graph of a code to be free of four-cycles. A new class of bit flipping algorithms for LDPC codes over the binary symmetric channel is proposed. Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit allows an increase in the guaranteed error correction capability. An additional bit is also employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis and selection of two-bit bit flipping algorithms is provided. The main component of this framework is the (re)definition of trapping sets, which are the most "compact" Tanner graphs that cause decoding failures of an algorithm. A recursive procedure to enumerate trapping sets is described. This procedure is the basis for selecting a collection of algorithms that work well together. It is demonstrated that decoders which employ a properly selected group of the proposed algorithms operating in parallel can offer high speed and low error floor decoding.

•Jan 1, 2012•1 citation

Efficient Analysis, Design and Decoding of Low-Density Parity-Check Codes

Masoud Ardakani

This dissertation presents new methods for the analysis, design and decoding of low-density parity-check (LDPC) codes. We start by studying the simplest class of decoders: the binary message-passing (BMP) decoders. We show that the optimum BMP decoder must satisfy certain symmetry and isotropy conditions, and prove that Gallager's Algorithm B is the optimum BMP algorithm. We use a generalization of extrinsic information transfer (EXIT) charts to formulate a linear program that leads to the design of highly efficient irregular LDPC codes for the BMP decoder. We extend this approach to the design of irregular LDPC codes for the additive white Gaussian noise channel. We introduce a "semi-Gaussian" approximation that very accurately predicts the behaviour of the decoder and permits code design over a wider range of rates and code parameters than in previous approaches. We then study the EXIT chart properties of the highest rate LDPC code which guarantees a certain convergence behaviour. We also introduce and analyze gear-shift decoding in which the decoder is permitted to select the decoding rule from among a predefined set. We show that this flexibility can give rise to significant reductions in decoding complexity. Finally, we show that binary LDPC codes can be combined with quadrature amplitude modulation to achieve near-capacity performance in a multitone system over frequency selective Gaussian channels.

•Jan 1, 2004•14 citations

Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

•Jan 1, 2007•2 citations

Memory-Efficient Sum–Product Decoding of LDPC Codes

H. Sankar, Krishna R. Narayanan

Low-density parity-check (LDPC) codes perform very close to capacity for long lengths on several channels. However, the amount of memory (fixed-point numbers that need to be stored) required for implementing the message-passing algorithm increases linearly as the number of edges in the graph increases. In this letter, we propose a decoding algorithm for decoding LDPC codes that reduces the memory requirement at the decoder. The proposed decoding algorithm can be analyzed using density evolution; further, we show how to design good LDPC codes using this. Results show that this algorithm provides almost the same performance as the conventional sum-product decoding of LDPC codes.

IEEE Transactions on Communications•Aug 1, 2004•28 citations
Low-density parity-check (LDPC) codes are linear error correcting codes which are capable of performing near channel capacity. Furthermore, they admit efficient decoding algorithms that provide near optimum performance. Their main disadvantage is that most LDPC codes have relatively complex encoders. In this thesis, we begin by giving a detailed discussion of the sum-product decoding algorithm, we then study the performance of LDPC codes on the binary erasure channel under sum-product decoding to obtain criteria for the design of codes that allow reliable transmission at rates arbitrarily close to channel capacity. Using these criteria we show how such codes are designed. We then present experimental results and compare them with theoretical predictions. Finally, we provide an overview of several approaches to solving the complex encoder problem.
Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented.
Low-density parity-check (LDPC) codes are a subclass of linear block codes. These codes have parity-check matrices in which the ratio of the non-zero elements to all elements is low. This property is exploited in defining low complexity decoding algorithms. Low-density parity-check codes have good distance properties and error correction capability near Shannon limits. In this thesis, the sum-product and the bit-flip decoding algorithms for low-density parity-check codes are implemented on Intel Pentium M 1,86 GHz processor using the software called MATLAB. Simulations for the two decoding algorithms are made over additive white gaussian noise (AWGN) channel changing the code parameters like the information rate, the blocklength of the code and the column weight of the parity-check matrix. Performance comparison of the two decoding algorithms are made according to these simulation results. As expected, the sum-product algorithm, which is based on soft-decision decoding, outperforms the bit-flip algorithm, which depends on hard-decision decoding. Our simulations show that the performance of LDPC codes improves with increasing blocklength and number of iterations for both decoding algorithms. Since the sum-product algorithm has lower error-floor characteristics, increasing the number of iterations is more effective for the sum-product decoder compared to the bit-flip decoder. By having better BER performance for lower information rates, the bit-flip algorithm performs according to the expectations; however, the performance of the sum-product decoder deteriorates for information rates below 0.5 instead of improving. By irregular construction of LDPC codes, a performance improvement is observed especially for low SNR values.
Error correcting codes are used in virtually all communication systems to ensure reliable transmission of information. In 1948, Shannon established an upper-bound on the maximum rate at which information can be transmitted reliably over a noisy channel. Reliably transmitting information with a rate close to this theoretical limit, known as the channel capacity, has been the goal of channel coding scientists for the last five decades. The rediscovery of low-density parity-check (LDPC) codes in the 1990s added much-renewed excitement in the coding community. LDPC codes are interesting because they can approach channel capacity under sub-optimum decoding algorithms whose complexity is linear in the code length. Unsurprisingly, LDPC codes quickly attained their popularity in practical applications such as magnetic storage, wireless and optical communications. One, if not the most, important and challenging problem in LDPC code research is the study and analysis of the error floor phenomenon. This phenomenon is described as an abrupt degradation in the frame error rate performance of LDPC codes in the high signal-to-noise ratio region. Error floor is harmful because its presence prevents the LDPC decoder from reaching very low probability of decoding failure, an important requirement for many applications. Not long after the rediscovery of LDPC codes, scientists established that error floor is caused by certain harmful structures, most commonly known as trapping sets, in the Tanner representation of a code. Since then, the study of error floor mostly consists of three major problems: 1) estimating error floor; 2) constructing LDPC codes with low error floor and 3) designing decoders that are less susceptible to error floor. Although some parts of this dissertation can be used as important elements in error floor estimation, our main contributions are a novel method for constructing LDPC codes with low error floor and a novel class of low complexity decoding algorithms that can collectively alleviate error floor. These contributions are summarized as follows. A method to construct LDPC codes with low error floors on the binary symmetric channel is presented. Codes are constructed so that their Tanner graphs are free of certain small trapping sets. These trapping sets are selected from the Trapping Set Ontology for the Gallager A/B decoder. They are selected based on their relative harmfulness for a given decoding algorithm. We evaluate the relative harmfulness of different trapping sets for the sum-product algorithm by using the topological relations among them and by analyzing the decoding failures on one trapping set in the presence or absence of other trapping sets. We apply this method to construct structured LDPC codes. To facilitate the discussion, we give a new description of structured LDPC codes whose parity-check matrices are arrays of permutation matrices. This description uses Latin squares to define a set of permutation matrices that have disjoint support and to derive a simple necessary and sufficient condition for the Tanner graph of a code to be free of four-cycles. A new class of bit flipping algorithms for LDPC codes over the binary symmetric channel is proposed. Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit allows an increase in the guaranteed error correction capability. An additional bit is also employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis and selection of two-bit bit flipping algorithms is provided. The main component of this framework is the (re)definition of trapping sets, which are the most "compact" Tanner graphs that cause decoding failures of an algorithm. A recursive procedure to enumerate trapping sets is described. This procedure is the basis for selecting a collection of algorithms that work well together. It is demonstrated that decoders which employ a properly selected group of the proposed algorithms operating in parallel can offer high speed and low error floor decoding.
This dissertation presents new methods for the analysis, design and decoding of low-density parity-check (LDPC) codes. We start by studying the simplest class of decoders: the binary message-passing (BMP) decoders. We show that the optimum BMP decoder must satisfy certain symmetry and isotropy conditions, and prove that Gallager's Algorithm B is the optimum BMP algorithm. We use a generalization of extrinsic information transfer (EXIT) charts to formulate a linear program that leads to the design of highly efficient irregular LDPC codes for the BMP decoder. We extend this approach to the design of irregular LDPC codes for the additive white Gaussian noise channel. We introduce a "semi-Gaussian" approximation that very accurately predicts the behaviour of the decoder and permits code design over a wider range of rates and code parameters than in previous approaches. We then study the EXIT chart properties of the highest rate LDPC code which guarantees a certain convergence behaviour. We also introduce and analyze gear-shift decoding in which the decoder is permitted to select the decoding rule from among a predefined set. We show that this flexibility can give rise to significant reductions in decoding complexity. Finally, we show that binary LDPC codes can be combined with quadrature amplitude modulation to achieve near-capacity performance in a multitone system over frequency selective Gaussian channels.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
Low-density parity-check (LDPC) codes perform very close to capacity for long lengths on several channels. However, the amount of memory (fixed-point numbers that need to be stored) required for implementing the message-passing algorithm increases linearly as the number of edges in the graph increases. In this letter, we propose a decoding algorithm for decoding LDPC codes that reduces the memory requirement at the decoder. The proposed decoding algorithm can be analyzed using density evolution; further, we show how to design good LDPC codes using this. Results show that this algorithm provides almost the same performance as the conventional sum-product decoding of LDPC codes.