Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Robust optical frequency dissemination with a dual-polarization coherent receiver

Cecilia Clivati, Paolo Savio, S. Abrate, Vittorio Curri, Roberto Gaudino, Marco Pizzocaro, Davide Calonico

Published Jan 23, 2020• 18 citations
Publisher

Abstract

Frequency dissemination over optical fiber links relies on measuring the phase of fiber-delivered lasers. Phase is extracted from optical beatnotes and the detection fails in case of beatnotes fading due to polarization changes, which strongly limit the reliability and robustness of the dissemination chain. We propose a new method that overcomes this issue, based on a dual-polarization coherent receiver and a dedicated signal processing that we developed on a field programmable gated array. Our method allowed analysis of polarization-induced phase noise from a theoretical and experimental point of view and endless tracking of the optical phase. This removes a major obstacle in the use of optical links for those physics experiments where long measurement times and high reliability are required.

DOI
10.1364/oe.378602

Related papers

Polarization-Insensitive Coherent Receiving in Optical Fiber Links for Frequency Metrology

Stefano Paracchino, Cecilia Clivati, Paolo Savio +3 more

In recent years, the dissemination of optical frequency signals along phase-stabilized fibers has allowed the comparison of optical clocks at unprecedented levels of accuracy. This has a strong relevance in frequency metrology and boosted the measurement capabilities also in other research fields such as radioastronomy [1], geodesy [2] and fundamental physics [3]. Fiber-based frequency dissemination relies on the transmission of a continuous-wave, narrow-linewidth laser whose frequency is accurately measured with an atomic clock at the National Metrology Institute (NMI) where it is generated. Specific techniques are used to compensate for the acoustic and seismic noise and temperature variations, which degrade the phase stability of the transmitted signal. However, in existing implementations, it is not possible to detect and compensate for the birefringence variations of the optical fiber. These can induce variations in the state of polarization (SOP) of the transmitted signal, affecting the optical beatnotes at the receiving end. This not only degrades the achievable performances in terms of phase stability of the metrological signal, but can also lead to beatnote fading, with consequent failure of the entire system. This problem currently represents one of the strongest limitations to the reliability of fiber-based frequency dissemination.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

Multi-node optical frequency dissemination with post automatic phase correction

Liang Hu, Xueyang Tian, Guiling Wu +3 more

We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.

arXiv:2001.05712•Journal of Lightwave Technology•Jan 1, 2020•24 citations

Coherent optical frequency transfer via 972-km fiber link

Xue 雪 Deng 邓, Xiang 翔 Zhang 张, Qi 琦 Zang 臧 +8 more

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

Chinese Physics B•Oct 24, 2023•8 citations

Eavesdropping time and frequency: phase noise cancellation along a time-varying path, such as an optical fiber

Gesine Grosche

Single-mode optical fiber is a highly efficient connecting medium used not only for optical telecommunications but also for the dissemination of ultrastable frequencies or timing signals. Ma et al. [Opt. Lett.19, 1777 (1994)] described a measurement and control system to deliver the same optical frequency at two places, namely the two ends of a fiber, by eliminating the "fiber-induced phase-noise modulation, which corrupts high-precision frequency-based applications." I present a simple detection and control scheme to deliver the same optical frequency at many places anywhere along a transmission path, or in its vicinity, with a relative instability of 1 part in 10(19). The same idea applies to radio frequency and timing signals. This considerably simplifies future efforts to make precise timing or frequency signals available to many users, as required in some large-scale science experiments.

arXiv:1309.0728•Optics Letters•Apr 15, 2014•72 citations

An accurate and robust metrological network for coherent optical frequency dissemination

Etienne Cantin, Mads Tønnes, Rodolphe Le Targat +3 more

Abstract We introduce multi-branch repeater laser stations (MLSs) for the dissemination of an ultra-stable signal from one point to multiple users and the simultaneous evaluation of the stability and accuracy of multiple links. We perform the study of the noise floor of this new instrument. We present then an optical fiber network of 4800 km built with three MLSs and 13 repeater laser stations (RLSs). We show the multi-user optical frequency dissemination on four links totalizing 2198 km with uncertainties below 1.1 × 10 −19 . The robustness of the network over two years is presented and stability and accuracy at 10 7 seconds integration time are finally showed.

New Journal of Physics•Feb 18, 2021•66 citations

Phase tracking for sub-shot-noise-limited receivers

M. T. DiMario, F. E. Becerra

Non-conventional receivers for phase-coherent states based on non-Gaussian measurements such as photon counting surpass the sensitivity limits of shot-noise-limited coherent receivers, the quantum noise limit (QNL). These non-Gaussian receivers can have a significant impact in future coherent communication technologies. However, random phase changes in realistic communication channels, such as optical fibers, present serious challenges for extracting the information encoded in coherent states. While there are methods for correcting random phase noise with conventional heterodyne detection, phase-tracking for non-Gaussian receivers surpassing the QNL is still an open problem. Here we demonstrate phase tracking for non-Gaussian receivers to correct for time-varying phase noise while allowing for decoding beyond the QNL. The phase-tracking method performs real-time parameter estimation and correction of phase drifts using the data from the non-Gaussian discrimination measurement, without relying on phase reference pilot fields. This method enables non-Gaussian receivers to achieve higher sensitivities and rates of information transfer than ideal coherent receivers in realistic channels with time-varying phase noise. This demonstration makes sub-QNL receivers a more robust, feasible, and practical quantum technology for classical and quantum communications.

arXiv:2007.02796•Physical Review Research•Jun 23, 2020•14 citations
Frequency dissemination over optical fiber links relies on measuring the phase of fiber-delivered lasers. Phase is extracted from optical beatnotes and the detection fails in case of beatnotes fading due to polarization changes, which strongly limit the reliability and robustness of the dissemination chain. We propose a new method that overcomes this issue, based on a dual-polarization coherent receiver and a dedicated signal processing that we developed on a field programmable gated array. Our method allowed analysis of polarization-induced phase noise from a theoretical and experimental point of view and endless tracking of the optical phase. This removes a major obstacle in the use of optical links for those physics experiments where long measurement times and high reliability are required.
In recent years, the dissemination of optical frequency signals along phase-stabilized fibers has allowed the comparison of optical clocks at unprecedented levels of accuracy. This has a strong relevance in frequency metrology and boosted the measurement capabilities also in other research fields such as radioastronomy [1], geodesy [2] and fundamental physics [3]. Fiber-based frequency dissemination relies on the transmission of a continuous-wave, narrow-linewidth laser whose frequency is accurately measured with an atomic clock at the National Metrology Institute (NMI) where it is generated. Specific techniques are used to compensate for the acoustic and seismic noise and temperature variations, which degrade the phase stability of the transmitted signal. However, in existing implementations, it is not possible to detect and compensate for the birefringence variations of the optical fiber. These can induce variations in the state of polarization (SOP) of the transmitted signal, affecting the optical beatnotes at the receiving end. This not only degrades the achievable performances in terms of phase stability of the metrological signal, but can also lead to beatnote fading, with consequent failure of the entire system. This problem currently represents one of the strongest limitations to the reliability of fiber-based frequency dissemination.
We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.
We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.
Single-mode optical fiber is a highly efficient connecting medium used not only for optical telecommunications but also for the dissemination of ultrastable frequencies or timing signals. Ma et al. [Opt. Lett.19, 1777 (1994)] described a measurement and control system to deliver the same optical frequency at two places, namely the two ends of a fiber, by eliminating the "fiber-induced phase-noise modulation, which corrupts high-precision frequency-based applications." I present a simple detection and control scheme to deliver the same optical frequency at many places anywhere along a transmission path, or in its vicinity, with a relative instability of 1 part in 10(19). The same idea applies to radio frequency and timing signals. This considerably simplifies future efforts to make precise timing or frequency signals available to many users, as required in some large-scale science experiments.
Abstract We introduce multi-branch repeater laser stations (MLSs) for the dissemination of an ultra-stable signal from one point to multiple users and the simultaneous evaluation of the stability and accuracy of multiple links. We perform the study of the noise floor of this new instrument. We present then an optical fiber network of 4800 km built with three MLSs and 13 repeater laser stations (RLSs). We show the multi-user optical frequency dissemination on four links totalizing 2198 km with uncertainties below 1.1 × 10 −19 . The robustness of the network over two years is presented and stability and accuracy at 10 7 seconds integration time are finally showed.
Non-conventional receivers for phase-coherent states based on non-Gaussian measurements such as photon counting surpass the sensitivity limits of shot-noise-limited coherent receivers, the quantum noise limit (QNL). These non-Gaussian receivers can have a significant impact in future coherent communication technologies. However, random phase changes in realistic communication channels, such as optical fibers, present serious challenges for extracting the information encoded in coherent states. While there are methods for correcting random phase noise with conventional heterodyne detection, phase-tracking for non-Gaussian receivers surpassing the QNL is still an open problem. Here we demonstrate phase tracking for non-Gaussian receivers to correct for time-varying phase noise while allowing for decoding beyond the QNL. The phase-tracking method performs real-time parameter estimation and correction of phase drifts using the data from the non-Gaussian discrimination measurement, without relying on phase reference pilot fields. This method enables non-Gaussian receivers to achieve higher sensitivities and rates of information transfer than ideal coherent receivers in realistic channels with time-varying phase noise. This demonstration makes sub-QNL receivers a more robust, feasible, and practical quantum technology for classical and quantum communications.