Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2001.05712 · Journal of Lightwave Technology

Multi-node optical frequency dissemination with post automatic phase correction

Liang Hu, Xueyang Tian, Guiling Wu, Mengya Kong, Jianguo Shen, Jianping Chen

Published Jan 1, 2020• 24 citations
arXivHTMLPDF

Abstract

We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.

DOI
10.1109/jlt.2020.2976167

Related papers

Branching Optical Frequency Transfer With Enhanced Post Automatic Phase Noise Cancellation

Ruimin Xue, Liang Hu, Jianguo Shen +2 more

We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the requirements of any active servo components. At each remote site, an acousto-optic modulator (AOM) is simultaneously taken as a frequency distinguisher for distinguishing its unique frequency from other sites' and as an optical actuator for compensating the phase noise coming from the optical fiber. With this configuration, we incorporate a long outside loop path consisting of a fiber-pigtailed AOM into the loop, enabling the significant reduction of the outside loop phase noise in the passive way. To further address the residual out-of-loop phase noise coming from the interferometer and the two-way optical frequency comparison setup, we design a low-noise active temperature stabilization system. Measurements with a back-to-back system show that the stability in our stabilization system is 2×10-16at 1 s, reaching 2×10-20after 10,000s. Adopting these techniques, we demonstrate transfer of a laser light through a branching fiber network with 50 km and 145 km two fiber links. After being compensated for the 145 km fiber link, the relative frequency instability is 3.4×10-15at the 1 s averaging time and scales down to 3.7×10-19at the 10,000 s averaging time. This proposed technique is suitable for the simultaneous transfer of an optical signal to a number of independent users within a local area.

arXiv:2104.13477•Journal of Lightwave Technology•Apr 28, 2021•18 citations

Coherence transfer of subhertz-linewidth laser light via an optical fiber noise compensated by remote users

Lifei Wu, Yanyi Jiang, Chaoqun Ma +3 more

We present a technique for the coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbation via the fiber link is compensated by remote users. When compensating the fiber noise by remote users, the time base at the remote site independent from that at the local site does not destroy the performance of the fiber output light. Using this technique, we demonstrate the transfer of subhertz-linewidth laser light through a 25-km-long, lab-based spooled fiber. After being compensated, the relative linewidth between the fiber input and output light is 1 mHz, and the relative frequency instability is 4×10−17 at 1 s averaging time and scales down to 2×10−19 at 800 s averaging time. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is 3.0×10−19. This system is suitable for the simultaneous transfer of an optical signal to a number of end users within a city.

Optics Letters•Sep 13, 2016•19 citations

Optical frequency transfer link with remote site compensation

Qi Zang, Xiang Zhang, Xue Deng +9 more

In this paper, we present a remote time-base-free technique for a coherent optical frequency transfer system via fiber.At the remote site, the thermal noise of the optical components is corrected along with the link phase noise caused by environmental effects.In this system, a 1 × 2 acousto-optic modulator (AOM) is applied at the remote site, with the first light being used to eliminate the noise of the remote time base and interface with remote users while the zeroth light is used to establish an active noise canceling loop.With this technique, a 10 MHz commercial oscillator, used as a time base at the remote site, does not contribute to the noise of the transferred signal.An experimental system is constructed using a 150 km fiber spool to validate the proposed technique.After compensation, the overlapping Allan deviation of the transfer link is 7.42 × 10 -15 at 1 s integration time and scales down to 1.07 × 10 -18 at 10,000 s integration time.The uncertainty of the transmitted optical frequency is on the order of a few 10 -19 .This significantly reduces the time-base requirements and costs for multi-user applications without compromising transfer accuracy.Meanwhile, these results show great potential for transferring ultra-stable optical frequency signals to remote sites, especially for point-to-multi-users.

Chinese Optics Letters•Jan 1, 2024•2 citations

Hybrid Fiber-Optic Time-Frequency Transfer for Enhanced Long-Term Frequency Stability

Libo Li, Lina Bai, Kan Zhao +3 more

Coherent Doppler noise cancellation is a cornerstone technique for the high-fidelity dissemination of optical frequency references. However, conventional implementations exhibit an inherent asymmetry by employing offset optical frequencies at the remote end to separate parasitic reflections from the return signal in a round-trip configuration. This asymmetry induces a residual phase error that accumulates with variations in the link propagation delay, fundamentally limiting the long-term frequency stability. We present a hybrid time-frequency transfer scheme that simultaneously disseminates a timing signal to probe the link delay and actively correct this asymmetry-induced error. Experimentally, we validate the method over a 300 km fiber spool subjected to a 7 °C temperature change, inducing a round trip link delay variation of 92.2 ns. With real-time monitoring and active compensation, the optical frequency instability is reduced from 2.1 × 10-19to 1.3 × 10-20at 30000 s averaging—an order-of-magnitude improvement. Simultaneously, the time transfer achieves 1.2 ps stability over the same period. This approach enables simultaneous high-precision time and frequency dissemination over long-haul fiber links with enhanced environmental immunity, establishing a practical pathway toward next-generation phase-stabilized fiber networks.

Journal of Lightwave Technology•Jan 1, 2026•0 citations

Coherent optical frequency transfer via 972-km fiber link

Xue 雪 Deng 邓, Xiang 翔 Zhang 张, Qi 琦 Zang 臧 +8 more

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

Chinese Physics B•Oct 24, 2023•8 citations

Multiple-Branch Optical Frequency Transfer Without the Frequency Allocation Constraints

Jianguo Shen, Ziang Qiu, Ruimin Xue +9 more

We report on the realization of a multiple-branch optical frequency transfer method, which can be adopted to deliver an optical reference to multiple independent remote sites. In comparison with the previous techniques, the proposed technique mitigates the frequency allocation constraints of the driving frequencies for the acousto-optic modulators (AOMs) at the remote sites by adding a short loop fiber link at the local site. The end-to-end optical path phase noise detection and compensation for each remote site is simultaneously performed at the remote site, which significantly simplifies the configuration at the local site, and can improve the signal-to-noise ratio (SNR) and reduce the cycle slip rate. We also conduct theoretical analysis for the effect of frequency aliasing from the perspective of different refractive index in triple-pass optical frequency transfer, analyze the effect of the SNR and cycle slips on the fractional frequency instability, and present a comprehensive equation for calculating noise contributions from end-to-end optical frequency transfer over the multiple-branch fiber network, demonstrating that the implementation of the fiber noise cancellation (FNC) for the each branch consisting of two fiber topologies with the single FNC setup is practical. This technique paves the way to integrate the optical frequency networks into the existing fiber communication networks with the higher compatibility and reliability.

Journal of Lightwave Technology•Apr 5, 2023•9 citations
We report a technique for coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is compensated by remote users with passive phase noise correction, rather than at the local site as is conventional. Neither phase discrimination nor active phase tracking is required due to the open-loop design, mitigating some technical problems such as the limited compensation speed and the finite compensation precision as conventional active phase noise cancellation. We theoretically analyze and experimentally demonstrate that the delay-limited residual fiber phase noise after phase noise compensation is a factor of seven higher than the conventional techniques. Using this technique, we demonstrate the transfer laser light through a 145-km-long, lab-based spooled fiber. After being compensated, a relative frequency instability is 1.9 × 10-15at the integration time of 1 s and scales down to the level of 10-18-range at 10,000 s. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is (-0.36 ± 2.6) × 10-18. As the transmitted optical signal remains unaltered until it reaches the remote sites, it can be transmitted simultaneously to multiple remote sites on an arbitrarily complex fiber network, paving a way to develop a multi-node optical frequency dissemination system with post automatic phase noise correction for a number of end-users.
We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the requirements of any active servo components. At each remote site, an acousto-optic modulator (AOM) is simultaneously taken as a frequency distinguisher for distinguishing its unique frequency from other sites' and as an optical actuator for compensating the phase noise coming from the optical fiber. With this configuration, we incorporate a long outside loop path consisting of a fiber-pigtailed AOM into the loop, enabling the significant reduction of the outside loop phase noise in the passive way. To further address the residual out-of-loop phase noise coming from the interferometer and the two-way optical frequency comparison setup, we design a low-noise active temperature stabilization system. Measurements with a back-to-back system show that the stability in our stabilization system is 2×10-16at 1 s, reaching 2×10-20after 10,000s. Adopting these techniques, we demonstrate transfer of a laser light through a branching fiber network with 50 km and 145 km two fiber links. After being compensated for the 145 km fiber link, the relative frequency instability is 3.4×10-15at the 1 s averaging time and scales down to 3.7×10-19at the 10,000 s averaging time. This proposed technique is suitable for the simultaneous transfer of an optical signal to a number of independent users within a local area.
We present a technique for the coherence transfer of laser light through a fiber link, where the optical phase noise induced by environmental perturbation via the fiber link is compensated by remote users. When compensating the fiber noise by remote users, the time base at the remote site independent from that at the local site does not destroy the performance of the fiber output light. Using this technique, we demonstrate the transfer of subhertz-linewidth laser light through a 25-km-long, lab-based spooled fiber. After being compensated, the relative linewidth between the fiber input and output light is 1 mHz, and the relative frequency instability is 4×10−17 at 1 s averaging time and scales down to 2×10−19 at 800 s averaging time. The frequency uncertainty of the light after transferring through the fiber relative to that of the input light is 3.0×10−19. This system is suitable for the simultaneous transfer of an optical signal to a number of end users within a city.
In this paper, we present a remote time-base-free technique for a coherent optical frequency transfer system via fiber.At the remote site, the thermal noise of the optical components is corrected along with the link phase noise caused by environmental effects.In this system, a 1 × 2 acousto-optic modulator (AOM) is applied at the remote site, with the first light being used to eliminate the noise of the remote time base and interface with remote users while the zeroth light is used to establish an active noise canceling loop.With this technique, a 10 MHz commercial oscillator, used as a time base at the remote site, does not contribute to the noise of the transferred signal.An experimental system is constructed using a 150 km fiber spool to validate the proposed technique.After compensation, the overlapping Allan deviation of the transfer link is 7.42 × 10 -15 at 1 s integration time and scales down to 1.07 × 10 -18 at 10,000 s integration time.The uncertainty of the transmitted optical frequency is on the order of a few 10 -19 .This significantly reduces the time-base requirements and costs for multi-user applications without compromising transfer accuracy.Meanwhile, these results show great potential for transferring ultra-stable optical frequency signals to remote sites, especially for point-to-multi-users.
Coherent Doppler noise cancellation is a cornerstone technique for the high-fidelity dissemination of optical frequency references. However, conventional implementations exhibit an inherent asymmetry by employing offset optical frequencies at the remote end to separate parasitic reflections from the return signal in a round-trip configuration. This asymmetry induces a residual phase error that accumulates with variations in the link propagation delay, fundamentally limiting the long-term frequency stability. We present a hybrid time-frequency transfer scheme that simultaneously disseminates a timing signal to probe the link delay and actively correct this asymmetry-induced error. Experimentally, we validate the method over a 300 km fiber spool subjected to a 7 °C temperature change, inducing a round trip link delay variation of 92.2 ns. With real-time monitoring and active compensation, the optical frequency instability is reduced from 2.1 × 10-19to 1.3 × 10-20at 30000 s averaging—an order-of-magnitude improvement. Simultaneously, the time transfer achieves 1.2 ps stability over the same period. This approach enables simultaneous high-precision time and frequency dissemination over long-haul fiber links with enhanced environmental immunity, establishing a practical pathway toward next-generation phase-stabilized fiber networks.
We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.
We report on the realization of a multiple-branch optical frequency transfer method, which can be adopted to deliver an optical reference to multiple independent remote sites. In comparison with the previous techniques, the proposed technique mitigates the frequency allocation constraints of the driving frequencies for the acousto-optic modulators (AOMs) at the remote sites by adding a short loop fiber link at the local site. The end-to-end optical path phase noise detection and compensation for each remote site is simultaneously performed at the remote site, which significantly simplifies the configuration at the local site, and can improve the signal-to-noise ratio (SNR) and reduce the cycle slip rate. We also conduct theoretical analysis for the effect of frequency aliasing from the perspective of different refractive index in triple-pass optical frequency transfer, analyze the effect of the SNR and cycle slips on the fractional frequency instability, and present a comprehensive equation for calculating noise contributions from end-to-end optical frequency transfer over the multiple-branch fiber network, demonstrating that the implementation of the fiber noise cancellation (FNC) for the each branch consisting of two fiber topologies with the single FNC setup is practical. This technique paves the way to integrate the optical frequency networks into the existing fiber communication networks with the higher compatibility and reliability.