Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Carbon nanotube-based lossy transmission line filter for superconducting qubit measurements

Mehran Vahdani Moghaddam, C. W. Sandbo Chang, Ibrahim Nsanzineza, A. M. Vadiraj, Christopher M. Wilson

Published Nov 18, 2019• 7 citations
Publisher

Abstract

In superconducting qubit measurements, stray infrared photons lead to damping processes that degrade quantum coherence. In this Letter, we show that a thermal blocking filter made of multiwalled carbon nanotubes diluted in stainless steel powder can significantly improve the energy relaxation time, T1, and the pure dephasing time, Tφ, of a qubit. By using two independent measurement lines, with and without the filter, and switching between them in situ, we observe that with the filter there is an increase of more than 61% in T1 and 291% in Tφ. We characterize the filter, demonstrating that the scattering parameters remain stable down to 8 mK over a wide range of frequencies, spanning from 10 MHz to 50 GHz. We also show that the cutoff frequency of the filter is easily controlled by selecting the concentration of nanotubes.

DOI
10.1063/1.5116109

Related papers

Microstrip filters for measurement and control of superconducting qubits

Luigi Longobardi, D. A. Bennett, Vijay Patel +2 more

Careful filtering is necessary for observations of quantum phenomena in superconducting circuits at low temperatures. Measurements of coherence between quantum states require extensive filtering to protect against noise coupled from room temperature electronics. We demonstrate distributed transmission line filters which cut off exponentially at GHz frequencies and can be anchored at the base temperature of a dilution refrigerator. The compact design makes them suitable to filter many different bias lines in the same setup, necessary for the control and measurement of superconducting qubits.

arXiv:1301.3153•Review of Scientific Instruments•Jan 1, 2013•13 citations

Magnetically loaded dielectric based absorptive filters and attenuators with tunable attenuation for superconducting quantum circuits

Srijita Das, Madhavi Chand, Samuel John +4 more

Cryogenic filtering and attenuation play a crucial role in the control and readout of superconducting qubits, ensuring that unwanted noise does not degrade qubit coherence. These devices typically operate in the microwave C band (4–8 GHz) and use attenuators (input) and circulators/isolators (output) to control in-band noise, while reflective filters are used to reject out-of-band noise. However, these devices tend to become transparent to terahertz and infrared radiation. Such high-frequency radiation reaching the qubit destroys superconductivity and induces dissipation, degrading the coherence properties of these devices. Magnetically loaded epoxy (like Eccosorb \(^\mathrm{{TM}}\) ) has been widely used as a dielectric to construct filters that absorb high-frequency radiation while minimizing loss in the operating band. Here, we demonstrate the construction and characterization of absorptive filters with variable in-band attenuation by combining Eccosorb \(^\mathrm{{TM}}\) or iron powder mixed with Stycast in different ratios. We show that such filters can be made with sufficiently large in-band attenuation to replace the usual thin-film resistor-based attenuators and simplify cryogenic wiring by combining attenuation and IR filtering in a single device. We characterize the microwave performance at room temperature and at dilution fridge temperatures for devices with insertion losses ranging from 1 dB to 20 dB at 7 GHz. In a separate set of experiments, we also test the materials’ absorption capabilities at terahertz frequencies up to 450 GHz. Finally, we demonstrate high coherence in a 3D superconducting qubit ( \(T_1, T_2^E \approx 100~\mu s\) ) using these filters and attenuators, thereby confirming their efficacy.

Scientific Reports•Jul 31, 2026•0 citations

Reducing decoherence in dc SQUID phase qubits

Anthony Przybysz

This thesis examines sources of dissipation and dephasing in a dc SQUID phase qubit. Coupling of the qubit to the bias lines and lossy dielectrics causes the qubit to lose quantum information through a process known generally as decoherence. Using knowledge of the possible sources of decoherence, a dc SQUID phase qubit is designed with parameters that should have made it resistant to dissipation and dephasing from those sources. Device PB9 was a dc SQUID with one small area 0.23 (μm)2 Josephson junction with a critical current of 130 nA, which was meant to be the qubit junction, and a larger area 5 (μm)2 junction with a critical current of 8.6 μA, which acted as part of an inductive isolation network. The qubit junction was shunted by a 1.5 pF low-loss interdigitated capacitor. The dc current bias line had an on-chip LC filter with a cutoff frequency of 180 MHz. The other control lines were also designed to minimize coupling of dissipative elements to the qubit. According to a theoretical model of the dissipation and dephasing, the qubit was expected to have an energy relaxation T1 ≤ 8.4 μs and dephasing time Tø ∼ 1 μs. Because of the relatively high Josephson inductance of the qubit junction, the device did not act perform like a conventional isolated single-junction phase qubit. Instead, the resonant modes that I observed were the normal modes of the entire SQUID. At 20 mK and a frequency of 4.047 GHz, the maximum energy relaxation time of the device was found to be 350 ± 70 ns, despite the optimized design. Through a study of T1 versus applied flux, T1 was found to depend on the strength of the coupling of the microwave drive line to the qubit. When the line was more coupled, T1 was shorter. This was evidence that the microwave line was overcoupled to the qubit, and was limiting the lifetime of the excited state T1. Through a study of the spectroscopic coherence time T2* , which measured the effects of low-frequency inhomogeneous broadening and higher frequency dephasing from noise, I discovered that device PB9 has several sweet spots. In particular, the presence of a sweet spot with respect to critical current fluctuations allowed me to identify critical current noise as a major source of broadening and dephasing in the qubit. From the spectroscopy I estimated the 1/f critical current noise power density at 1 Hz was SI01 (1Hz) ≈ 10 (nA) 2/Hz and the 1/f flux noise power spectral density at 1 Hz was SΦ (1Hz) ≈ (110 μΦ 0)2/Hz. Both of these values were quite high, possibly due to switching of the device between measurements.

•Jan 1, 2010•1 citation

Increasing energy relaxation time of superconducting qubits with nonmagnetic infrared filter and shield

Yuhao Liu, Mengmeng Li, Dong Lan +4 more

One of the primary origins of the energy relaxation in superconducting qubits is the quasiparticle loss. The quasiparticles can be excited remarkably by infrared radiation. In order to minimize the density of quasiparticle and increase the qubit relaxation time, we design and fabricate the infrared filter and shield for superconducting qubits. In comparison with previous filters and shields, a nonmagnetic dielectric is used as the infrared absorbing material, greatly suppressing the background magnetic fluctuations. The filters can be made to impedance-match with other microwave devices. Using the as-fabricated infrared filter and shield, we increased the relaxation time of a transmon qubit from 519 ns to 1125 ns.

Chinese Physics B•May 1, 2016•0 citations

Suppression of photon shot noise dephasing in a tunable coupling superconducting qubit

Gengyan Zhang, Yanbing Liu, James J. Raftery +1 more

Abstract We demonstrate the suppression of photon shot noise dephasing in a superconducting qubit by eliminating its dispersive coupling to the readout cavity. This is achieved in a tunable coupling qubit, where the qubit frequency and coupling rate can be controlled independently. We observe that the coherence time approaches twice the relaxation time and becomes less sensitive to thermal photon noise when the dispersive coupling rate is tuned from several MHz to 22 kHz. This work provides a promising building block in circuit quantum electrodynamics that can hold high coherence and be integrated into larger systems.

arXiv:1603.01224•npj Quantum Information•Jan 12, 2017•148 citations

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Аnton I. Ivanov, Victor I. Polozov, Vladimir V. Echeistov +5 more

Electromagnetic noise is one of the main external factors decreasing superconducting qubit coherence. Matched coaxial filters can prevent microwave and IR photons' negative influence on superconducting quantum circuits. In this report, we describe the design and fabrication process of matched coaxial filters for noise-sensitive measurements at millikelvin temperatures. A robust transmission coefficient and ultralow reflection loss of −20 dB in the frequency range up to 20 GHz is achieved. Fabricated low-pass filters have linear transmission and reflection characteristics with 3 dB-cutoff frequency of 1.5–2.5 GHz. A method for extracting the propagation constant and filter impedance from scattering parameter measurements is demonstrated. This method is experimentally approved on a filter with a compound of Cu powder and Stycast epoxy resin and a filter filled with ECCOSORB CR-110 epoxy resin. The proposed design and assembly technology are versatile for various compounds and provide highly repeatable geometric and microwave characteristics. Furthermore, we demonstrate that these low-pass coaxial filters can be effectively utilized to improve superconducting qubit relaxation due to suppressing standing waves originating from reflections in control coaxial cables.

arXiv:2210.15301•Applied Physics Letters•Nov 13, 2023•13 citations
In superconducting qubit measurements, stray infrared photons lead to damping processes that degrade quantum coherence. In this Letter, we show that a thermal blocking filter made of multiwalled carbon nanotubes diluted in stainless steel powder can significantly improve the energy relaxation time, T1, and the pure dephasing time, Tφ, of a qubit. By using two independent measurement lines, with and without the filter, and switching between them in situ, we observe that with the filter there is an increase of more than 61% in T1 and 291% in Tφ. We characterize the filter, demonstrating that the scattering parameters remain stable down to 8 mK over a wide range of frequencies, spanning from 10 MHz to 50 GHz. We also show that the cutoff frequency of the filter is easily controlled by selecting the concentration of nanotubes.
Careful filtering is necessary for observations of quantum phenomena in superconducting circuits at low temperatures. Measurements of coherence between quantum states require extensive filtering to protect against noise coupled from room temperature electronics. We demonstrate distributed transmission line filters which cut off exponentially at GHz frequencies and can be anchored at the base temperature of a dilution refrigerator. The compact design makes them suitable to filter many different bias lines in the same setup, necessary for the control and measurement of superconducting qubits.
Cryogenic filtering and attenuation play a crucial role in the control and readout of superconducting qubits, ensuring that unwanted noise does not degrade qubit coherence. These devices typically operate in the microwave C band (4–8 GHz) and use attenuators (input) and circulators/isolators (output) to control in-band noise, while reflective filters are used to reject out-of-band noise. However, these devices tend to become transparent to terahertz and infrared radiation. Such high-frequency radiation reaching the qubit destroys superconductivity and induces dissipation, degrading the coherence properties of these devices. Magnetically loaded epoxy (like Eccosorb TM^\mathrm{{TM}}TM ) has been widely used as a dielectric to construct filters that absorb high-frequency radiation while minimizing loss in the operating band. Here, we demonstrate the construction and characterization of absorptive filters with variable in-band attenuation by combining Eccosorb TM^\mathrm{{TM}}TM or iron powder mixed with Stycast in different ratios. We show that such filters can be made with sufficiently large in-band attenuation to replace the usual thin-film resistor-based attenuators and simplify cryogenic wiring by combining attenuation and IR filtering in a single device. We characterize the microwave performance at room temperature and at dilution fridge temperatures for devices with insertion losses ranging from 1 dB to 20 dB at 7 GHz. In a separate set of experiments, we also test the materials’ absorption capabilities at terahertz frequencies up to 450 GHz. Finally, we demonstrate high coherence in a 3D superconducting qubit ( T1,T2E≈100 μsT_1, T_2^E \approx 100~\mu sT1​,T2E​≈100 μs ) using these filters and attenuators, thereby confirming their efficacy.
This thesis examines sources of dissipation and dephasing in a dc SQUID phase qubit. Coupling of the qubit to the bias lines and lossy dielectrics causes the qubit to lose quantum information through a process known generally as decoherence. Using knowledge of the possible sources of decoherence, a dc SQUID phase qubit is designed with parameters that should have made it resistant to dissipation and dephasing from those sources. Device PB9 was a dc SQUID with one small area 0.23 (μm)2 Josephson junction with a critical current of 130 nA, which was meant to be the qubit junction, and a larger area 5 (μm)2 junction with a critical current of 8.6 μA, which acted as part of an inductive isolation network. The qubit junction was shunted by a 1.5 pF low-loss interdigitated capacitor. The dc current bias line had an on-chip LC filter with a cutoff frequency of 180 MHz. The other control lines were also designed to minimize coupling of dissipative elements to the qubit. According to a theoretical model of the dissipation and dephasing, the qubit was expected to have an energy relaxation T1 ≤ 8.4 μs and dephasing time Tø ∼ 1 μs. Because of the relatively high Josephson inductance of the qubit junction, the device did not act perform like a conventional isolated single-junction phase qubit. Instead, the resonant modes that I observed were the normal modes of the entire SQUID. At 20 mK and a frequency of 4.047 GHz, the maximum energy relaxation time of the device was found to be 350 ± 70 ns, despite the optimized design. Through a study of T1 versus applied flux, T1 was found to depend on the strength of the coupling of the microwave drive line to the qubit. When the line was more coupled, T1 was shorter. This was evidence that the microwave line was overcoupled to the qubit, and was limiting the lifetime of the excited state T1. Through a study of the spectroscopic coherence time T2* , which measured the effects of low-frequency inhomogeneous broadening and higher frequency dephasing from noise, I discovered that device PB9 has several sweet spots. In particular, the presence of a sweet spot with respect to critical current fluctuations allowed me to identify critical current noise as a major source of broadening and dephasing in the qubit. From the spectroscopy I estimated the 1/f critical current noise power density at 1 Hz was SI01 (1Hz) ≈ 10 (nA) 2/Hz and the 1/f flux noise power spectral density at 1 Hz was SΦ (1Hz) ≈ (110 μΦ 0)2/Hz. Both of these values were quite high, possibly due to switching of the device between measurements.
One of the primary origins of the energy relaxation in superconducting qubits is the quasiparticle loss. The quasiparticles can be excited remarkably by infrared radiation. In order to minimize the density of quasiparticle and increase the qubit relaxation time, we design and fabricate the infrared filter and shield for superconducting qubits. In comparison with previous filters and shields, a nonmagnetic dielectric is used as the infrared absorbing material, greatly suppressing the background magnetic fluctuations. The filters can be made to impedance-match with other microwave devices. Using the as-fabricated infrared filter and shield, we increased the relaxation time of a transmon qubit from 519 ns to 1125 ns.
Abstract We demonstrate the suppression of photon shot noise dephasing in a superconducting qubit by eliminating its dispersive coupling to the readout cavity. This is achieved in a tunable coupling qubit, where the qubit frequency and coupling rate can be controlled independently. We observe that the coherence time approaches twice the relaxation time and becomes less sensitive to thermal photon noise when the dispersive coupling rate is tuned from several MHz to 22 kHz. This work provides a promising building block in circuit quantum electrodynamics that can hold high coherence and be integrated into larger systems.
Electromagnetic noise is one of the main external factors decreasing superconducting qubit coherence. Matched coaxial filters can prevent microwave and IR photons' negative influence on superconducting quantum circuits. In this report, we describe the design and fabrication process of matched coaxial filters for noise-sensitive measurements at millikelvin temperatures. A robust transmission coefficient and ultralow reflection loss of −20 dB in the frequency range up to 20 GHz is achieved. Fabricated low-pass filters have linear transmission and reflection characteristics with 3 dB-cutoff frequency of 1.5–2.5 GHz. A method for extracting the propagation constant and filter impedance from scattering parameter measurements is demonstrated. This method is experimentally approved on a filter with a compound of Cu powder and Stycast epoxy resin and a filter filled with ECCOSORB CR-110 epoxy resin. The proposed design and assembly technology are versatile for various compounds and provide highly repeatable geometric and microwave characteristics. Furthermore, we demonstrate that these low-pass coaxial filters can be effectively utilized to improve superconducting qubit relaxation due to suppressing standing waves originating from reflections in control coaxial cables.