Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2210.15301 · Applied Physics Letters

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Аnton I. Ivanov, Victor I. Polozov, Vladimir V. Echeistov, Andrey A. Samoylov, Elizaveta I. Malevannaya, Aleksei R. Matanin, Nikita S. Smirnov, Ilya A. Rodionov

Published Nov 13, 2023• 13 citations
arXivHTMLPDF

Abstract

Electromagnetic noise is one of the main external factors decreasing superconducting qubit coherence. Matched coaxial filters can prevent microwave and IR photons' negative influence on superconducting quantum circuits. In this report, we describe the design and fabrication process of matched coaxial filters for noise-sensitive measurements at millikelvin temperatures. A robust transmission coefficient and ultralow reflection loss of −20 dB in the frequency range up to 20 GHz is achieved. Fabricated low-pass filters have linear transmission and reflection characteristics with 3 dB-cutoff frequency of 1.5–2.5 GHz. A method for extracting the propagation constant and filter impedance from scattering parameter measurements is demonstrated. This method is experimentally approved on a filter with a compound of Cu powder and Stycast epoxy resin and a filter filled with ECCOSORB CR-110 epoxy resin. The proposed design and assembly technology are versatile for various compounds and provide highly repeatable geometric and microwave characteristics. Furthermore, we demonstrate that these low-pass coaxial filters can be effectively utilized to improve superconducting qubit relaxation due to suppressing standing waves originating from reflections in control coaxial cables.

DOI
10.1063/5.0177092

Related papers

Co-Designed Reflective and Leaky-Waveguide Low-Pass Filter for Superconducting Circuits

Linus Andersson, Benjamin Olsson, Simone Gasparinetti +1 more

A stepped-impedance low-pass filter with integrated hollow waveguide absorbers is presented. The filter combines low insertion loss in the passband with strong attenuation at high frequencies, making it well suited for superconducting quantum computing applications, where qubits are sensitive to both near-band and far out-of-band radiation. The structure is implemented in a rectangular coaxial geometry, with inductive sections coupled to circular hollow waveguides oriented orthogonally to the transmission axis. Above their cutoff frequency, these waveguides efficiently couple to radiation inside the stepped-impedance filter, absorbing energy that would otherwise cause Cooper pair breaking in conventional superconductors. Optimal dimensions were obtained using a differential evolution (DE) algorithm applied to interpolated electromagnetic simulation data. A prototype was fabricated and characterized using a calibrated vector network analyzer (VNA) up to 67 GHz. Measurements confirm a 3-dB cutoff frequency at 13.7 GHz, insertion loss below 0.4 dB for frequencies under 8 GHz, and more than 48.5-dB rejection above 17.3 GHz. The design offers a compact, low-loss solution for near-band filtering and suppression of quasiparticle-generating radiation in cryogenic quantum systems.

arXiv:2508.02475•IEEE Transactions on Microwave Theory and Techniques•Dec 23, 2025•0 citations

Engineering the microwave to infrared noise photon flux for superconducting quantum systems

Sergey Danilin, João Barbosa, Michael Farage +6 more

Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies - beyond the pair-breaking energies - cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.

arXiv:2107.09331•EPJ Quantum Technology•Jan 15, 2022•31 citations

Magnetically loaded dielectric based absorptive filters and attenuators with tunable attenuation for superconducting quantum circuits

Srijita Das, Madhavi Chand, Samuel John +4 more

Cryogenic filtering and attenuation play a crucial role in the control and readout of superconducting qubits, ensuring that unwanted noise does not degrade qubit coherence. These devices typically operate in the microwave C band (4–8 GHz) and use attenuators (input) and circulators/isolators (output) to control in-band noise, while reflective filters are used to reject out-of-band noise. However, these devices tend to become transparent to terahertz and infrared radiation. Such high-frequency radiation reaching the qubit destroys superconductivity and induces dissipation, degrading the coherence properties of these devices. Magnetically loaded epoxy (like Eccosorb \(^\mathrm{{TM}}\) ) has been widely used as a dielectric to construct filters that absorb high-frequency radiation while minimizing loss in the operating band. Here, we demonstrate the construction and characterization of absorptive filters with variable in-band attenuation by combining Eccosorb \(^\mathrm{{TM}}\) or iron powder mixed with Stycast in different ratios. We show that such filters can be made with sufficiently large in-band attenuation to replace the usual thin-film resistor-based attenuators and simplify cryogenic wiring by combining attenuation and IR filtering in a single device. We characterize the microwave performance at room temperature and at dilution fridge temperatures for devices with insertion losses ranging from 1 dB to 20 dB at 7 GHz. In a separate set of experiments, we also test the materials’ absorption capabilities at terahertz frequencies up to 450 GHz. Finally, we demonstrate high coherence in a 3D superconducting qubit ( \(T_1, T_2^E \approx 100~\mu s\) ) using these filters and attenuators, thereby confirming their efficacy.

Scientific Reports•Jul 31, 2026•0 citations

Narrow bandpass cryogenic filter for microwave measurements

Boris I. Ivanov, Dmitry Klimenko, A. N. Sultanov +2 more

An ultra-wide stopband hairpin bandpass filter with integrated nonuniform transmission lines was designed and fabricated for highly sensitive measurements at cryogenic temperatures down to millikelvin and a frequency range of 10 Hz-10 GHz. The scattering matrices of the filter were characterized at T = 4.2 K. The filter provides a stopband from 10 Hz to 2.2 GHz and from 2.3 GHz to 10 GHz with more than 50 dB and 40 dB of amplitude suppression, respectively. The center frequency of the passband is f0 = 2.25 GHz with a bandwidth Δf = 80 MHz. The maximum insertion loss in the passband is 4 dB. The filter has a 50 Ω input and output impedance, SubMiniature version A connector termination, and significantly reduced form factor. The wide stopband frequency range and narrow passband in conjunction with small dimensions make the filter suitable to use it as a part of a high sensitive readout for superconducting quantum circuits, such as superconducting quantum bits and cryogenic parametric amplifiers.

Review of Scientific Instruments•May 1, 2013•3 citations

Fabrication of Superconducting Reflectionless Filters for Quantum Microwave Circuits

Eric Q. Bui

The performance and scalability of superconducting quantum circuits depends critically on the microwave environment. Minimizing signal reflections and suppressing thermal noise are essential for achieving high-fidelity readout and preserving qubit coherence. A significant challenge arises from the use of conventional cryogenic components such as isolators and circulators, which exhibit nonideal out-of-band reflection characteristics. Reflections degrade impedance matching and limit the performance of broadband quantum limited amplifiers. Superconducting implementations of reflectionless microwave filters offer a promising solution to mitigate these issues. The focus of this work is the fabrication and cryogenic characterization of reflectionless filters compatible with superconducting qubit fabrication flows. Devices were implemented on high resistivity silicon substrates using aluminum ground planes, integrated nichrome resistors, and crossovers formed with SiO2 interlayer dielectric. Cryogenic measurements at 20 mK demonstrate high return loss, confirming the viability of these filters for co-fabrication with traveling-wave parametric amplifiers (TWPAs) and circuit quantum electrodynamics (cQED) architectures. The filters exhibit low insertion loss in the passband to maintain quantum measurement efficiency and provide broadband reflection suppression across frequencies relevant to superconducting qubits, offering a scalable way to manage microwave noise in superconducting quantum processors.

•Sep 1, 2025•0 citations

Improved powder filters for qubit measurements

Alexander V. Lukashenko, Alexey Vladimirovich Ustinov

We designed and fabricated miniature low-pass metal powder filters suitable for noise-sensitive measurements at cryogenic temperatures. In comparison with previous powder filters, our filters have a much better frequency response and significantly smaller dimensions (0.7 cm(3) including the plugs) and can also be used as hermetic feedthroughs at low temperatures. Their transmission characteristics are smooth, contain no ripples, and have a steep decay above the cutoff frequency. At 4.2 K the cutoff frequency of a single filter is f(c)=1 MHz and the roll-off is -50 dB per decade. All of the fabricated filters have identical frequency responses at 4.2 K and their characteristics are reliably reproducible.

Review of Scientific Instruments•Jan 1, 2008•59 citations
Electromagnetic noise is one of the main external factors decreasing superconducting qubit coherence. Matched coaxial filters can prevent microwave and IR photons' negative influence on superconducting quantum circuits. In this report, we describe the design and fabrication process of matched coaxial filters for noise-sensitive measurements at millikelvin temperatures. A robust transmission coefficient and ultralow reflection loss of −20 dB in the frequency range up to 20 GHz is achieved. Fabricated low-pass filters have linear transmission and reflection characteristics with 3 dB-cutoff frequency of 1.5–2.5 GHz. A method for extracting the propagation constant and filter impedance from scattering parameter measurements is demonstrated. This method is experimentally approved on a filter with a compound of Cu powder and Stycast epoxy resin and a filter filled with ECCOSORB CR-110 epoxy resin. The proposed design and assembly technology are versatile for various compounds and provide highly repeatable geometric and microwave characteristics. Furthermore, we demonstrate that these low-pass coaxial filters can be effectively utilized to improve superconducting qubit relaxation due to suppressing standing waves originating from reflections in control coaxial cables.
A stepped-impedance low-pass filter with integrated hollow waveguide absorbers is presented. The filter combines low insertion loss in the passband with strong attenuation at high frequencies, making it well suited for superconducting quantum computing applications, where qubits are sensitive to both near-band and far out-of-band radiation. The structure is implemented in a rectangular coaxial geometry, with inductive sections coupled to circular hollow waveguides oriented orthogonally to the transmission axis. Above their cutoff frequency, these waveguides efficiently couple to radiation inside the stepped-impedance filter, absorbing energy that would otherwise cause Cooper pair breaking in conventional superconductors. Optimal dimensions were obtained using a differential evolution (DE) algorithm applied to interpolated electromagnetic simulation data. A prototype was fabricated and characterized using a calibrated vector network analyzer (VNA) up to 67 GHz. Measurements confirm a 3-dB cutoff frequency at 13.7 GHz, insertion loss below 0.4 dB for frequencies under 8 GHz, and more than 48.5-dB rejection above 17.3 GHz. The design offers a compact, low-loss solution for near-band filtering and suppression of quasiparticle-generating radiation in cryogenic quantum systems.
Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies - beyond the pair-breaking energies - cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.
Cryogenic filtering and attenuation play a crucial role in the control and readout of superconducting qubits, ensuring that unwanted noise does not degrade qubit coherence. These devices typically operate in the microwave C band (4–8 GHz) and use attenuators (input) and circulators/isolators (output) to control in-band noise, while reflective filters are used to reject out-of-band noise. However, these devices tend to become transparent to terahertz and infrared radiation. Such high-frequency radiation reaching the qubit destroys superconductivity and induces dissipation, degrading the coherence properties of these devices. Magnetically loaded epoxy (like Eccosorb TM^\mathrm{{TM}}TM ) has been widely used as a dielectric to construct filters that absorb high-frequency radiation while minimizing loss in the operating band. Here, we demonstrate the construction and characterization of absorptive filters with variable in-band attenuation by combining Eccosorb TM^\mathrm{{TM}}TM or iron powder mixed with Stycast in different ratios. We show that such filters can be made with sufficiently large in-band attenuation to replace the usual thin-film resistor-based attenuators and simplify cryogenic wiring by combining attenuation and IR filtering in a single device. We characterize the microwave performance at room temperature and at dilution fridge temperatures for devices with insertion losses ranging from 1 dB to 20 dB at 7 GHz. In a separate set of experiments, we also test the materials’ absorption capabilities at terahertz frequencies up to 450 GHz. Finally, we demonstrate high coherence in a 3D superconducting qubit ( T1,T2E≈100 μsT_1, T_2^E \approx 100~\mu sT1​,T2E​≈100 μs ) using these filters and attenuators, thereby confirming their efficacy.
An ultra-wide stopband hairpin bandpass filter with integrated nonuniform transmission lines was designed and fabricated for highly sensitive measurements at cryogenic temperatures down to millikelvin and a frequency range of 10 Hz-10 GHz. The scattering matrices of the filter were characterized at T = 4.2 K. The filter provides a stopband from 10 Hz to 2.2 GHz and from 2.3 GHz to 10 GHz with more than 50 dB and 40 dB of amplitude suppression, respectively. The center frequency of the passband is f0 = 2.25 GHz with a bandwidth Δf = 80 MHz. The maximum insertion loss in the passband is 4 dB. The filter has a 50 Ω input and output impedance, SubMiniature version A connector termination, and significantly reduced form factor. The wide stopband frequency range and narrow passband in conjunction with small dimensions make the filter suitable to use it as a part of a high sensitive readout for superconducting quantum circuits, such as superconducting quantum bits and cryogenic parametric amplifiers.
The performance and scalability of superconducting quantum circuits depends critically on the microwave environment. Minimizing signal reflections and suppressing thermal noise are essential for achieving high-fidelity readout and preserving qubit coherence. A significant challenge arises from the use of conventional cryogenic components such as isolators and circulators, which exhibit nonideal out-of-band reflection characteristics. Reflections degrade impedance matching and limit the performance of broadband quantum limited amplifiers. Superconducting implementations of reflectionless microwave filters offer a promising solution to mitigate these issues. The focus of this work is the fabrication and cryogenic characterization of reflectionless filters compatible with superconducting qubit fabrication flows. Devices were implemented on high resistivity silicon substrates using aluminum ground planes, integrated nichrome resistors, and crossovers formed with SiO2 interlayer dielectric. Cryogenic measurements at 20 mK demonstrate high return loss, confirming the viability of these filters for co-fabrication with traveling-wave parametric amplifiers (TWPAs) and circuit quantum electrodynamics (cQED) architectures. The filters exhibit low insertion loss in the passband to maintain quantum measurement efficiency and provide broadband reflection suppression across frequencies relevant to superconducting qubits, offering a scalable way to manage microwave noise in superconducting quantum processors.
We designed and fabricated miniature low-pass metal powder filters suitable for noise-sensitive measurements at cryogenic temperatures. In comparison with previous powder filters, our filters have a much better frequency response and significantly smaller dimensions (0.7 cm(3) including the plugs) and can also be used as hermetic feedthroughs at low temperatures. Their transmission characteristics are smooth, contain no ripples, and have a steep decay above the cutoff frequency. At 4.2 K the cutoff frequency of a single filter is f(c)=1 MHz and the roll-off is -50 dB per decade. All of the fabricated filters have identical frequency responses at 4.2 K and their characteristics are reliably reproducible.