Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Investigations for a Miniature Optical Frequency Reference Based on High-Contrast Sub-Doppler Resonance in a MEMS Cesium Vapor Cell

Denis V. Brazhnikov, Michael Petersen, Grégoire Coget, Nicolas Passilly, Vincent N. Maurice, Christophe Gorecki, Rodolphe Boudot

Published Apr 8, 2019• 0 citations
OpenAlex

Abstract

Many of modern quantum technologies require the development of high-performance and low-power consumption miniaturized devices such as laser systems, atomic clocks, magnetometers and other quantum sensors. These instruments are to date often based on the use of chip-size diode lasers and microfabricated (MEMS) cells filled with alkali atoms [1]. An interesting challenge concerns the development of miniaturized optical frequency references (OFR). Different approaches have been engaged in this direction. One of the most successful example is a rubidium microcell-based OFR, involving the two-photon spectroscopy technique. This approach has recently demonstrated a remarkable frequency stability level of 4.4×10–12 at 1 s [2]. The present study is focused on a simple alternative approach based on sub-Doppler spectroscopy (SDS) with counter-propagating light beams. We propose to use dual-frequency light beams with orthogonal linear polarizations and frequency difference w1–w2 = Dhfs, with Dhfs the frequency of the atom ground-state hyper-fine splitting. First dual-frequency sub-Doppler spectroscopy (DF SDS) experiments have been performed with cmscale cells [3,4]. In the present study, we present preliminary spectroscopy and frequency stability results of alaser stabilized using DF SDS with a Cs vapor microfabricated cell [5] (Fig.1a). An extended-cavity diode laser (ECDL) source and a Mach-Zehnder intensity EOM are used to obtain the dual-frequency light field. A forward beam goes through the cell and is then reflected by a mirror to create the backward beam.

Related papers

Dual-frequency sub-Doppler spectroscopy: Extended theoretical model and microcell-based experiments

Denis V. Brazhnikov, Michael Petersen, Grégoire Coget +4 more

Sub-Doppler spectroscopy in alkali-metal vapor cells using two counterpropagating dual-frequency laser beams allows the detection of high-contrast sign-reversed natural-linewidth sub-Doppler resonances. Previously, a qualitative theory based on a simplified \ensuremath{\Lambda}-scheme model has been reported to explain underlying physics of this phenomenon. In this paper, an extended theoretical model of dual-frequency sub-Doppler spectroscopy (DFSDS) for the Cs ${D}_{1}$ line is reported. Taking into account the real atomic energy structure, main relaxation processes, and various nonlinear effects, this model describes quantitatively the respective contributions of involved physical processes and predicts main properties (height and linewidth) of the sub-Doppler resonances. Experimental tests are performed with a Cs vapor microfabricated cell and results are found to be in correct agreement with theoretical predictions. Spatial oscillations of the sub-Doppler resonance amplitude with translation of the reflection mirror are highlighted. A beat note between two laser systems, including one stabilized with DFSDS on a Cs vapor microcell, yields a fractional frequency stability of $2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}12}\phantom{\rule{0.16em}{0ex}}{\ensuremath{\tau}}^{\ensuremath{-}1/2}$ until 10-s averaging time. These results demonstrate that DFSDS could be an interesting approach for the development of a high-performance microcell-based optical frequency reference, with applications in various compact quantum devices.

arXiv:1812.09641•Physical Review A•Jun 17, 2019•39 citations

Saturated absorption spectroscopy of the Cs atom 6S1/2 → 7P1/2 transition at 459 nm in a microfabricated vapor cell

Emmanuel Klinger, Andrei Mursa, C. M. Rivera-Aguilar +3 more

Microfabricated (MEMS) alkali vapor cells are at the core of high-precision integrated atomic quantum sensors and devices [1], such as microwave and optical clocks, or magnetometers. The first chip-scale atomic device was a microwave atomic clock based on coherent population trapping [2]. It has offered in its industrial and commercialized version an ultra-low size-power -instability budget, impacting a plethora of industrial and scientific applications. Nevertheless, the short-term stability of these clocks is usually limited at about 10−10 at 1 s. Hot vapor MEMS-based optical frequency standards constitute a new generation of miniaturized clocks, with enhanced stability. These references keep the benefit of using wafer-scalable and mass-producible vapor cells while preventing ultra-high vacuum technologies and laser cooling. Among the transitions explored, the 6S1/2 → 7P1/2 near-UV transition of Cs atom was used to demonstrate an optical reference with a stability of 2.1 × 10−13 at 1 s and averaging down to a few 10−14 [3]. However, this reference was based on a 5 cm-long glass-blown cell, not compliant with the advent of a fully-miniaturized and low-power optical clock. In this work [4], we present the characterization of sub-Doppler resonances detected in a microfabricated cell by probing, in a simple saturated absorption configuration, the Cs atom 6S1/2 → 7P1/2 transition at 459 nm. The impact of the laser intensity and cell temperature on the sub-Doppler resonance is experimentally investigated. Optimal values are identified for the development of a near-UV microcell-stabilized frequency reference. Detection noise measurements are also reported, predicting a short-term stability in the 10−13 range at 1 s. Tests of cells with embedded getters are under progress for improved purity of the cell inner atmosphere and narrowing of the resonance.

•Sep 30, 2024•0 citations

Saturated absorption spectroscopy of the near-UV Cs atom 6S1/2-7P1/2 transition in a MEMS vapor cell

Emmanuel Klinger, C. M. Rivera-Aguilar, Rémy Vicarini +2 more

Microfabricated (MEMS) alkali vapor cells are at the core of high-precision integrated atomic quantum sensors and devices, such as microwave and optical clocks, or magnetometers. The first chip-scale atomic device was a microwave atomic clock based on coherent population trapping. It has offered in its industrial and commercialized version an ultra-low size-power-instability budget, impacting a plethora of industrial and scientific applications. Nevertheless, the short-term stability of these clocks is usually limited at about 10−10 at 1 s.Hot vapor MEMS-based optical frequency standards constitute a new generation of miniaturized clocks, with enhanced stability. These references keep the benefit of using wafer-scalable and mass-producible vapor cells while preventing ultra-high vacuum technologies and laser cooling. Among the transitions explored, the 6S1/2 − 7P1/2 near-UV transition of Cs atom was used to demonstrate an optical reference with a stability of 2.1 × 10−13 at 1 s and averaging down to a few 10−14. However, this reference was based on a 5 cm-long glass-blown cell, not compliant with the advent of a fullyminiaturized and low-power optical clock.In this work, we present the characterization of sub-Doppler resonances detected in a microfabricated cell by probing, in a simple saturated absorption configuration, the Cs atom 6S1/2 – 7P1/2 transition at 459 nm. The impact of the laser intensity and cell temperature on the sub-Doppler resonance is experimentally investigated. Optimal values are identified for the development of a near-UV microcell-stabilized frequency reference. Detection noise measurements are also reported, predicting a short-term stability in the 10−13 range at 1 s. Tests of cells with embedded getters are under progress for improved purity of the cell inner atmosphere and narrowing of the resonance. Latest results will be presented at the conference.

•Jun 25, 2024•0 citations

Nonlinear enhanced-absorption resonances in compact alkali-vapor cells for applications in quantum metrology

Denis V. Brazhnikov, S M Ignatovich, I. S. Mesenzova +10 more

Abstract We review three laser spectroscopy schemes developed recently for observation of high-contrast enhanced-absorption nonlinear resonances in small alkali-vapor cells. In our experiments, optical transitions within the cesium D1 line are involved and a probe beam transmission is analyzed. The first spectroscopy method is based on the configuration with two-frequency counter propagating beams, which are linearly polarized in orthogonal directions. This configuration provides observation of high-contrast natural-linewidth resonances superimposed on broad Doppler profiles when the laser frequency is scanned. These resonances have good prospects for developing a miniature optical frequency reference. The second scheme involves two-frequency counter propagating beams with equal circular polarizations and provides observation of subnatural-linewidth resonances when the Raman frequency detuning is scanned. We use these resonances for stabilizing the microwave frequency of a local oscillator (≈ 4.6 GHz). Frequency stability of around 6 × l0-12 is achieved at 1-s averaging using a 5-mm length cell. This result makes the technique attractive for developing a miniature frequency standard in thr microwave range. The third configuration exploits single-frequency counter-propagating beams with linear orthogonal polarizations. The ultrahigh-contrast subnatural-linewidth resonances can be observed when the longitudinal magnetic field is scanned around zero. The possible application is discussed of these resonances in vector atomic magnetometry.

Journal of Physics Conference Series•Mar 1, 2021•6 citations

Laser frequency stabilization using Doppler-free polarization-rotation spectroscopy based on coherent resonance in a miniature 87 Rb vapor cell

祝孝杰 Zhu Xiaojie, RenPing Sun, WeiHao Zhao +4 more

Abstract Locking laser frequencies to Doppler-free spectra produced by the interaction of light with alkali atoms in a vapor cell is a promising approach for realizing compact atomic optical frequency reference. In this work, we employ counter-propagating monochromatic laser beams with a polarization angle of 45° to interact with 87 Rb atoms in a 3 mm cubic vapor cell, inducing coherent resonance. By detecting the laser polarization rotation, we obtain a Doppler free spectral line, which is used as a reference for laser frequency locking, thus realizing an optical reference. We build two nominally identical systems and measure their beatnote, yielding a fractional frequency stability of 5.3×10 -13 at 1 s. This study demonstrates that the proposed scheme is a competitive approach for realizing high performance compact atomic optical reference.

Chinese Physics B•Aug 20, 2026•0 citations

Short-term stability of Cs microcell-stabilized lasers using dual-frequency sub-Doppler spectroscopy

Anthony Gusching, M. Petersen, Nicolas Passilly +3 more

The combination of atomic spectroscopy, integrated photonics, and microelectromechanical systems leads the way to the demonstration of microcell-based optical atomic clocks. Here, we report the short-term stability budget of table-top Cs microcell-stabilized lasers based on dual-frequency sub-Doppler spectroscopy (DFSDS). The dependence of the sub-Doppler resonance properties on key experimental parameters is studied. The detection noise budget and absolute phase noise measurements are in good agreement with the measured short-term frequency stability of the laser beatnote, at the level of 1.1 × 10 − 12 τ − 1 / 2 until 100 s, currently limited by the intermodulation effect from a distributed-feedback laser setup. The fractional frequency stability of the laser beatnote at 1 s is about 100 times greater than that of commercial microwave chip-scale atomic clocks and validates interest in the DFSDS approach for the development of high-performance microcell-based optical standards.

Journal of the Optical Society of America B•Sep 20, 2021•33 citations
Many of modern quantum technologies require the development of high-performance and low-power consumption miniaturized devices such as laser systems, atomic clocks, magnetometers and other quantum sensors. These instruments are to date often based on the use of chip-size diode lasers and microfabricated (MEMS) cells filled with alkali atoms [1]. An interesting challenge concerns the development of miniaturized optical frequency references (OFR). Different approaches have been engaged in this direction. One of the most successful example is a rubidium microcell-based OFR, involving the two-photon spectroscopy technique. This approach has recently demonstrated a remarkable frequency stability level of 4.4×10–12 at 1 s [2]. The present study is focused on a simple alternative approach based on sub-Doppler spectroscopy (SDS) with counter-propagating light beams. We propose to use dual-frequency light beams with orthogonal linear polarizations and frequency difference w1–w2 = Dhfs, with Dhfs the frequency of the atom ground-state hyper-fine splitting. First dual-frequency sub-Doppler spectroscopy (DF SDS) experiments have been performed with cmscale cells [3,4]. In the present study, we present preliminary spectroscopy and frequency stability results of alaser stabilized using DF SDS with a Cs vapor microfabricated cell [5] (Fig.1a). An extended-cavity diode laser (ECDL) source and a Mach-Zehnder intensity EOM are used to obtain the dual-frequency light field. A forward beam goes through the cell and is then reflected by a mirror to create the backward beam.
Sub-Doppler spectroscopy in alkali-metal vapor cells using two counterpropagating dual-frequency laser beams allows the detection of high-contrast sign-reversed natural-linewidth sub-Doppler resonances. Previously, a qualitative theory based on a simplified \ensuremath{\Lambda}-scheme model has been reported to explain underlying physics of this phenomenon. In this paper, an extended theoretical model of dual-frequency sub-Doppler spectroscopy (DFSDS) for the Cs D1{D}_{1}D1​ line is reported. Taking into account the real atomic energy structure, main relaxation processes, and various nonlinear effects, this model describes quantitatively the respective contributions of involved physical processes and predicts main properties (height and linewidth) of the sub-Doppler resonances. Experimental tests are performed with a Cs vapor microfabricated cell and results are found to be in correct agreement with theoretical predictions. Spatial oscillations of the sub-Doppler resonance amplitude with translation of the reflection mirror are highlighted. A beat note between two laser systems, including one stabilized with DFSDS on a Cs vapor microcell, yields a fractional frequency stability of $2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}12}\phantom{\rule{0.16em}{0ex}}{\ensuremath{\tau}}^{\ensuremath{-}1/2}$ until 10-s averaging time. These results demonstrate that DFSDS could be an interesting approach for the development of a high-performance microcell-based optical frequency reference, with applications in various compact quantum devices.
Microfabricated (MEMS) alkali vapor cells are at the core of high-precision integrated atomic quantum sensors and devices [1], such as microwave and optical clocks, or magnetometers. The first chip-scale atomic device was a microwave atomic clock based on coherent population trapping [2]. It has offered in its industrial and commercialized version an ultra-low size-power -instability budget, impacting a plethora of industrial and scientific applications. Nevertheless, the short-term stability of these clocks is usually limited at about 10−10 at 1 s. Hot vapor MEMS-based optical frequency standards constitute a new generation of miniaturized clocks, with enhanced stability. These references keep the benefit of using wafer-scalable and mass-producible vapor cells while preventing ultra-high vacuum technologies and laser cooling. Among the transitions explored, the 6S1/2 → 7P1/2 near-UV transition of Cs atom was used to demonstrate an optical reference with a stability of 2.1 × 10−13 at 1 s and averaging down to a few 10−14 [3]. However, this reference was based on a 5 cm-long glass-blown cell, not compliant with the advent of a fully-miniaturized and low-power optical clock. In this work [4], we present the characterization of sub-Doppler resonances detected in a microfabricated cell by probing, in a simple saturated absorption configuration, the Cs atom 6S1/2 → 7P1/2 transition at 459 nm. The impact of the laser intensity and cell temperature on the sub-Doppler resonance is experimentally investigated. Optimal values are identified for the development of a near-UV microcell-stabilized frequency reference. Detection noise measurements are also reported, predicting a short-term stability in the 10−13 range at 1 s. Tests of cells with embedded getters are under progress for improved purity of the cell inner atmosphere and narrowing of the resonance.
Microfabricated (MEMS) alkali vapor cells are at the core of high-precision integrated atomic quantum sensors and devices, such as microwave and optical clocks, or magnetometers. The first chip-scale atomic device was a microwave atomic clock based on coherent population trapping. It has offered in its industrial and commercialized version an ultra-low size-power-instability budget, impacting a plethora of industrial and scientific applications. Nevertheless, the short-term stability of these clocks is usually limited at about 10−10 at 1 s.Hot vapor MEMS-based optical frequency standards constitute a new generation of miniaturized clocks, with enhanced stability. These references keep the benefit of using wafer-scalable and mass-producible vapor cells while preventing ultra-high vacuum technologies and laser cooling. Among the transitions explored, the 6S1/2 − 7P1/2 near-UV transition of Cs atom was used to demonstrate an optical reference with a stability of 2.1 × 10−13 at 1 s and averaging down to a few 10−14. However, this reference was based on a 5 cm-long glass-blown cell, not compliant with the advent of a fullyminiaturized and low-power optical clock.In this work, we present the characterization of sub-Doppler resonances detected in a microfabricated cell by probing, in a simple saturated absorption configuration, the Cs atom 6S1/2 – 7P1/2 transition at 459 nm. The impact of the laser intensity and cell temperature on the sub-Doppler resonance is experimentally investigated. Optimal values are identified for the development of a near-UV microcell-stabilized frequency reference. Detection noise measurements are also reported, predicting a short-term stability in the 10−13 range at 1 s. Tests of cells with embedded getters are under progress for improved purity of the cell inner atmosphere and narrowing of the resonance. Latest results will be presented at the conference.
Abstract We review three laser spectroscopy schemes developed recently for observation of high-contrast enhanced-absorption nonlinear resonances in small alkali-vapor cells. In our experiments, optical transitions within the cesium D1 line are involved and a probe beam transmission is analyzed. The first spectroscopy method is based on the configuration with two-frequency counter propagating beams, which are linearly polarized in orthogonal directions. This configuration provides observation of high-contrast natural-linewidth resonances superimposed on broad Doppler profiles when the laser frequency is scanned. These resonances have good prospects for developing a miniature optical frequency reference. The second scheme involves two-frequency counter propagating beams with equal circular polarizations and provides observation of subnatural-linewidth resonances when the Raman frequency detuning is scanned. We use these resonances for stabilizing the microwave frequency of a local oscillator (≈ 4.6 GHz). Frequency stability of around 6 × l0-12 is achieved at 1-s averaging using a 5-mm length cell. This result makes the technique attractive for developing a miniature frequency standard in thr microwave range. The third configuration exploits single-frequency counter-propagating beams with linear orthogonal polarizations. The ultrahigh-contrast subnatural-linewidth resonances can be observed when the longitudinal magnetic field is scanned around zero. The possible application is discussed of these resonances in vector atomic magnetometry.
Abstract Locking laser frequencies to Doppler-free spectra produced by the interaction of light with alkali atoms in a vapor cell is a promising approach for realizing compact atomic optical frequency reference. In this work, we employ counter-propagating monochromatic laser beams with a polarization angle of 45° to interact with 87 Rb atoms in a 3 mm cubic vapor cell, inducing coherent resonance. By detecting the laser polarization rotation, we obtain a Doppler free spectral line, which is used as a reference for laser frequency locking, thus realizing an optical reference. We build two nominally identical systems and measure their beatnote, yielding a fractional frequency stability of 5.3×10 -13 at 1 s. This study demonstrates that the proposed scheme is a competitive approach for realizing high performance compact atomic optical reference.
The combination of atomic spectroscopy, integrated photonics, and microelectromechanical systems leads the way to the demonstration of microcell-based optical atomic clocks. Here, we report the short-term stability budget of table-top Cs microcell-stabilized lasers based on dual-frequency sub-Doppler spectroscopy (DFSDS). The dependence of the sub-Doppler resonance properties on key experimental parameters is studied. The detection noise budget and absolute phase noise measurements are in good agreement with the measured short-term frequency stability of the laser beatnote, at the level of 1.1 × 10 − 12 τ − 1 / 2 until 100 s, currently limited by the intermodulation effect from a distributed-feedback laser setup. The fractional frequency stability of the laser beatnote at 1 s is about 100 times greater than that of commercial microwave chip-scale atomic clocks and validates interest in the DFSDS approach for the development of high-performance microcell-based optical standards.