Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Técnicas de resfriamento e aprisionamento de átomos aplicadas a átomos de estrôncio

M. L. Miguez

Published Sep 20, 2013• 0 citations
Publisher

Abstract

The present work describes the methods used to obtain a sample of ultra cold atoms of strontium.The methods necessary for obtaining the sample are: a Zeeman decelerator and a two step magneto-optical trap (MOTs).The first MOT works on the blue transition 1 S 0 -1 P 1 while the second is operating on the red transition 1 S 0 -3 P 1 transition.In the first stage a laser operating at 497nm is used to drive the 3 P 2 -3 D 2 transition in order to prevent atoms accumulating in the 3 P 1 dark state.The last stage, after cooling, consists in a dipole trap for strontium atoms using only one laser beam with 1064nm wavelength.This trap is loaded by the transfer of a pre cooled atomic sample.We explain how the analysis and acquisition of the presented data are made.We also emphasize the importance of the obtained results for the current project as well as for future ones.

DOI
10.11606/d.76.2013.tde-20122013-091001

Related papers

Efficient cooling and trapping of strontium atoms

Irène Ventrillard, Audrey Quessada, Richard P. Kovacich +4 more

We report the capture of cold strontium atoms in a magneto-optical trap (MOT) at a rate of 4 x 10(10) atoms/s. The MOT is loaded from an atomic beam decelerated by a Zeeman slower operating with a focused laser beam. The 461-nm laser, used for both cooling and trapping, was generated by sum-frequency mixing in a KTP crystal with diode lasers at 813 nm and a Nd:YAG laser at 1064 nm. As much as 115 mW of blue light was obtained.

Optics Letters•Mar 15, 2003•52 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations

Ultracold 88Sr atoms for an optical lattice clock

Thomas Legero, J. S. Raaj Vellore Winfred, F. Riehle +1 more

This paper reports results of cooling and trapping of88Sr for future use in an optical lattice clock. Strontium atoms are cooled to ultra-cold temperatures using a two-stage cooling process. In the first stage, atoms are captured from a Zeeman-slowed atomic beam and cooled to 2 mK in a magneto optical trap operated on the1So-1P1transition at 461 nm. The second cooling stage utilizes the spin forbidden1So-3P1transition at 689 nm. To reach ultra-cold temperatures, 50 ms of broadband cooling is followed by 28 ms long single frequency cooling. The transfer efficiency from the first to the second cooling stage was measured to be 23%, leaving 7 x 106 atoms at a temperature of 1 muK. The atomic cloud is overlapped with a horizontally oriented 1-D far-off resonance optical dipole trap (FORT) at 813 nm with an effective potential depth of 25 muK. Due to equal light shifts of the1Soand the3P1state simultaneous Doppler cooling during the atom loading into the FORT is possible which leads to a transfer efficiency into the dipole trap of up to 60%.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2007•4 citations

Construction of an experiment providing cold strontium atoms for atomic interferometry in a ring cavity

Michelle A. Moreno-Armijos

This thesis describes the first steps to fulfill the main objective of our project: the development of a gravimetry system based on the continuous monitoring of Bloch oscillations performed by ultra-cold strontium atoms.The realization of this project comprises three main stages: the first stage consists in obtaining a magneto-optical trap in the broad transition of 461 nm of strontium, the second stage is the transfer to a magneto-optical trap in the narrow intercombination line of 689 nm, and finally the third stage is the monitoring of Bloch oscillations of the cloud of atoms in a ring cavity.This work details the first stage of the project, the creation of an experimental apparatus which produces ultra-cold strontium atoms in the transition of 461 nm, as well as the characterization of the cloud of atoms, temperature, size, number of atoms, etc.For this project, a new experimental apparatus has been designed and realized.It involves an ultra-high vacuum system, magnetic field sources, laser systems and optical instruments which are required for cooling, trapping and repumping strontium atoms.A novel feature is the implementation of a transversely loaded two-dimensional magneto-optical trap, which serves as a source of a cold strontium atomic beam.A loading rate of the atomic beam into a nearby three-dimensional magneto-optical trap exceeding 10 5 s -1 for the 88 Sr isotope at a moderate dispenser temperature of 600 • C are reported.The temperature of the cloud is about 4 mK and its size 0.3 mm, these characteristics suggest that the state of the atomic trap is in optimal conditions to make the transfer to the optical magneto trap in the intercombination line and thus continue with the second stage of the project.

•Apr 1, 2020•2 citations

Magneto-Optical Trapping of 88 Sr atoms with 689 nm Laser

Qiang Wang, Bai-Ke Lin, Yang Chun Zhao +6 more

We report the experimental realization of strontium magneto-optical trap (MOT) operating on the intercombination transition 1 S 0 − 3 P 1 at 689 nm, namely red MOT. A 689 nm laser used for cooling and trapping is injection locked to a master laser, whose linewidth is narrowed to 150 Hz by locking to a high finesse optical reference cavity. 88 Sr atoms pre-cooled and trapped by the broad 1 S 0 − 1 P 1 transition at 461 nm are transferred to the red MOT with the help of a time sequence controller. The transfer ratio is about 20% and the red MOT's temperature is estimated to be less than 20 μK by the time-of-flight (TOF) image analysis.

Chinese Physics Letters•Mar 1, 2011•11 citations

Narrow Line Cooling of 84Sr

Roger Ding

Laser cooling has become a powerful tool for producing quantum gases and has enabled the study of a wide range of phenomena only accessible at ultracold temperatures. This thesis will describe the implementation and characterization of a magneto-optical trap (MOT) for laser cooling strontium to microkelvin temperatures operating on the narrow 689nm transition (the “red” MOT). The red MOT is the second cooling stage required to create quantum degenerate gases of strontium, bridging the temperatures and densities produced by the first cooling stage (the 461 nm “blue” MOT) and the shallow conservative traps for evaporation to quantum degeneracy.

•Dec 12, 2016•0 citations
The present work describes the methods used to obtain a sample of ultra cold atoms of strontium.The methods necessary for obtaining the sample are: a Zeeman decelerator and a two step magneto-optical trap (MOTs).The first MOT works on the blue transition 1 S 0 -1 P 1 while the second is operating on the red transition 1 S 0 -3 P 1 transition.In the first stage a laser operating at 497nm is used to drive the 3 P 2 -3 D 2 transition in order to prevent atoms accumulating in the 3 P 1 dark state.The last stage, after cooling, consists in a dipole trap for strontium atoms using only one laser beam with 1064nm wavelength.This trap is loaded by the transfer of a pre cooled atomic sample.We explain how the analysis and acquisition of the presented data are made.We also emphasize the importance of the obtained results for the current project as well as for future ones.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.
This paper reports results of cooling and trapping of88Sr for future use in an optical lattice clock. Strontium atoms are cooled to ultra-cold temperatures using a two-stage cooling process. In the first stage, atoms are captured from a Zeeman-slowed atomic beam and cooled to 2 mK in a magneto optical trap operated on the1So-1P1transition at 461 nm. The second cooling stage utilizes the spin forbidden1So-3P1transition at 689 nm. To reach ultra-cold temperatures, 50 ms of broadband cooling is followed by 28 ms long single frequency cooling. The transfer efficiency from the first to the second cooling stage was measured to be 23%, leaving 7 x 106 atoms at a temperature of 1 muK. The atomic cloud is overlapped with a horizontally oriented 1-D far-off resonance optical dipole trap (FORT) at 813 nm with an effective potential depth of 25 muK. Due to equal light shifts of the1Soand the3P1state simultaneous Doppler cooling during the atom loading into the FORT is possible which leads to a transfer efficiency into the dipole trap of up to 60%.
This thesis describes the first steps to fulfill the main objective of our project: the development of a gravimetry system based on the continuous monitoring of Bloch oscillations performed by ultra-cold strontium atoms.The realization of this project comprises three main stages: the first stage consists in obtaining a magneto-optical trap in the broad transition of 461 nm of strontium, the second stage is the transfer to a magneto-optical trap in the narrow intercombination line of 689 nm, and finally the third stage is the monitoring of Bloch oscillations of the cloud of atoms in a ring cavity.This work details the first stage of the project, the creation of an experimental apparatus which produces ultra-cold strontium atoms in the transition of 461 nm, as well as the characterization of the cloud of atoms, temperature, size, number of atoms, etc.For this project, a new experimental apparatus has been designed and realized.It involves an ultra-high vacuum system, magnetic field sources, laser systems and optical instruments which are required for cooling, trapping and repumping strontium atoms.A novel feature is the implementation of a transversely loaded two-dimensional magneto-optical trap, which serves as a source of a cold strontium atomic beam.A loading rate of the atomic beam into a nearby three-dimensional magneto-optical trap exceeding 10 5 s -1 for the 88 Sr isotope at a moderate dispenser temperature of 600 • C are reported.The temperature of the cloud is about 4 mK and its size 0.3 mm, these characteristics suggest that the state of the atomic trap is in optimal conditions to make the transfer to the optical magneto trap in the intercombination line and thus continue with the second stage of the project.
We report the experimental realization of strontium magneto-optical trap (MOT) operating on the intercombination transition 1 S 0 − 3 P 1 at 689 nm, namely red MOT. A 689 nm laser used for cooling and trapping is injection locked to a master laser, whose linewidth is narrowed to 150 Hz by locking to a high finesse optical reference cavity. 88 Sr atoms pre-cooled and trapped by the broad 1 S 0 − 1 P 1 transition at 461 nm are transferred to the red MOT with the help of a time sequence controller. The transfer ratio is about 20% and the red MOT's temperature is estimated to be less than 20 μK by the time-of-flight (TOF) image analysis.
Laser cooling has become a powerful tool for producing quantum gases and has enabled the study of a wide range of phenomena only accessible at ultracold temperatures. This thesis will describe the implementation and characterization of a magneto-optical trap (MOT) for laser cooling strontium to microkelvin temperatures operating on the narrow 689nm transition (the “red” MOT). The red MOT is the second cooling stage required to create quantum degenerate gases of strontium, bridging the temperatures and densities produced by the first cooling stage (the 461 nm “blue” MOT) and the shallow conservative traps for evaporation to quantum degeneracy.