Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Efficient cooling and trapping of strontium atoms

Irène Ventrillard, Audrey Quessada, Richard P. Kovacich, J.‐J. Zondy, Arnaud Landragin, Andr  Clairon, P. Lemonde

Published Mar 15, 2003• 52 citations
Publisher

Abstract

We report the capture of cold strontium atoms in a magneto-optical trap (MOT) at a rate of 4 x 10(10) atoms/s. The MOT is loaded from an atomic beam decelerated by a Zeeman slower operating with a focused laser beam. The 461-nm laser, used for both cooling and trapping, was generated by sum-frequency mixing in a KTP crystal with diode lasers at 813 nm and a Nd:YAG laser at 1064 nm. As much as 115 mW of blue light was obtained.

DOI
10.1364/ol.28.000468

Related papers

Cold strontium atoms for an optical frequency standard

Irène Ventrillard, Audrey Quessada, Richard P. Kovacich +5 more

We report the capture of cold strontium atoms in a magnetooptical trap at a rate of 3/spl times/10/sup 10/ atoms/s. This is achieved with high power laser light at 461 nm generated by sum frequency mixing in a potassium titanyl phosphate (KTP) crystal using diode lasers at 813 nm and a Nd:YAG laser at 1064 nm. Up to 115 mW of blue light is obtained. Tuned to the /sup 1/S/sub 0//spl rarr//sup 1/P/sub 1/ of /sup 88/Sr, this light is used both to slow down an atomic beam in a Zeeman slower and to capture the atoms in a magnetooptical trap. Trapping of /sup 87/Sr and /sup 86/Sr is also reported.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2003•1 citation

Design of a cold atom source for a neutral strontium optical frequency standard

Irène Ventrillard, Audrey Quessada, Richard P. Kovacich +4 more

We discuss the design of a cold atom source for a neutral strontium optical frequency standard. The cooling laser light at 461 nm is produced by sum frequency generation by a KTP crystal inside a doubly resonant cavity. Up to 120 mW of blue light are generated. We also describe the atomic beam and the Zeeman slower from which the atoms are captured.

Conference on Precision Electromagnetic Measurements•Jun 25, 2003•0 citations

Towards a strontium based stationary optical lattice clock

Qasim Hassan Ubaid

Optical atomic clocks have proven to be the most stable clocks with the lowest systematic uncertainty which has now reached a record level of (9.4 X10/(^{19}/)). Thus optical clocks now surpass the best fountain Cs atomic clocks by three orders of magnitude which opens the prospect of using optical clocks as frequency standards for timekeeping in the near future. \n \nThis thesis describes the progress that has been made towards a stationary optical lattice clock based on strontium atoms, and reports the results of an ongoing characterization. \n \nAn experimental apparatus was designed and built to efficiently slow, cool, and trap the strontium atoms which represent the heart of the strontium optical lattice clock discussed in this thesis. The novel aspects of the experimental development described in the thesis comprise a frequency doubling cavity for producing 461 nm laser light employed for cooling and trapping the strontium atoms in the first stage cooling. This cavity provided sufficient power for cooling and trapping the strontium atoms for up to 300 mW of 461 nm laser light. Furthermore, a new design of Zeeman slower based on spherical permanent magnets was produced, built and characterized. \n \nThe slower is compact, tunable, easy to assemble and maintain, and cost-effective as the permanent magnets do not require any power supply or water cooling. It is suggested that this kind of Zeeman slower constitutes an ideal solution for portable optical clock systems. A blue magneto-optical trap was realized for the first time with such a Zeeman slower. With about 30 mW of a 461 nm laser, up to 6X10/(^8/) atoms were captured.

•Jul 20, 2020•0 citations

The progress of strontium optical clock at NIM

Shaokai Wang, Qiang Wang, Bai-Ke Lin +8 more

We report the experimental realization of88Sr magneto-optical trap (MOT) operating at the wavelength of 461 nm and 689nm. The blue MOT is loaded via a 32 cm long spin-flip type Zeeman slower which enhances the MOT population by a factor of 44. We have trapped 1.6×10888Sr atoms with the use of 679nm and 707nm repumping laser. The88Sr cloud has a temperature of about 2.3 mK, measured by recording the time evolution of the absorption signal. The 689nm laser used in our experiment has a line width of about 200Hz. To optimize the transfer efficiency, the laser spectrum is broadened by frequency modulation technique to about 2 MHz. The transfer efficiency from blue MOT to red MOT is about 20%.

European Frequency and Time Forum•Apr 1, 2010•0 citations

Cooling and Trapping 88 Sr Atoms with 461 nm Laser

Shaokai Wang, Wang Qiang, Lin Yi-Ge +5 more

We report the experimental realization of a 88Sr magneto-optical trap (MOT) operating at the wavelength of 461 nm. The MOT is loaded via a 32 cm long spin-flip type Zeeman slower which enhances the MOT population by a factor of 22. The total laser power available in our experiment is about 300 mW. We have trapped 1.6 × 108 88Sr atoms with a 679nm and 707 nm repumping laser. The two repumping lasers enhance the trap population and trap lifetime by factors of 11 and 7, respectively. The 88Sr cloud has a temperature of about 2.3 mK, measured by recording the time evolution of the absorption signal.

Chinese Physics Letters•Sep 1, 2009•25 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations
We report the capture of cold strontium atoms in a magneto-optical trap (MOT) at a rate of 4 x 10(10) atoms/s. The MOT is loaded from an atomic beam decelerated by a Zeeman slower operating with a focused laser beam. The 461-nm laser, used for both cooling and trapping, was generated by sum-frequency mixing in a KTP crystal with diode lasers at 813 nm and a Nd:YAG laser at 1064 nm. As much as 115 mW of blue light was obtained.
We report the capture of cold strontium atoms in a magnetooptical trap at a rate of 3/spl times/10/sup 10/ atoms/s. This is achieved with high power laser light at 461 nm generated by sum frequency mixing in a potassium titanyl phosphate (KTP) crystal using diode lasers at 813 nm and a Nd:YAG laser at 1064 nm. Up to 115 mW of blue light is obtained. Tuned to the /sup 1/S/sub 0//spl rarr//sup 1/P/sub 1/ of /sup 88/Sr, this light is used both to slow down an atomic beam in a Zeeman slower and to capture the atoms in a magnetooptical trap. Trapping of /sup 87/Sr and /sup 86/Sr is also reported.
Optical atomic clocks have proven to be the most stable clocks with the lowest systematic uncertainty which has now reached a record level of (9.4 X10/(^{19}/)). Thus optical clocks now surpass the best fountain Cs atomic clocks by three orders of magnitude which opens the prospect of using optical clocks as frequency standards for timekeeping in the near future. \n \nThis thesis describes the progress that has been made towards a stationary optical lattice clock based on strontium atoms, and reports the results of an ongoing characterization. \n \nAn experimental apparatus was designed and built to efficiently slow, cool, and trap the strontium atoms which represent the heart of the strontium optical lattice clock discussed in this thesis. The novel aspects of the experimental development described in the thesis comprise a frequency doubling cavity for producing 461 nm laser light employed for cooling and trapping the strontium atoms in the first stage cooling. This cavity provided sufficient power for cooling and trapping the strontium atoms for up to 300 mW of 461 nm laser light. Furthermore, a new design of Zeeman slower based on spherical permanent magnets was produced, built and characterized. \n \nThe slower is compact, tunable, easy to assemble and maintain, and cost-effective as the permanent magnets do not require any power supply or water cooling. It is suggested that this kind of Zeeman slower constitutes an ideal solution for portable optical clock systems. A blue magneto-optical trap was realized for the first time with such a Zeeman slower. With about 30 mW of a 461 nm laser, up to 6X10/(^8/) atoms were captured.
We report the experimental realization of88Sr magneto-optical trap (MOT) operating at the wavelength of 461 nm and 689nm. The blue MOT is loaded via a 32 cm long spin-flip type Zeeman slower which enhances the MOT population by a factor of 44. We have trapped 1.6×10888Sr atoms with the use of 679nm and 707nm repumping laser. The88Sr cloud has a temperature of about 2.3 mK, measured by recording the time evolution of the absorption signal. The 689nm laser used in our experiment has a line width of about 200Hz. To optimize the transfer efficiency, the laser spectrum is broadened by frequency modulation technique to about 2 MHz. The transfer efficiency from blue MOT to red MOT is about 20%.
We report the experimental realization of a 88Sr magneto-optical trap (MOT) operating at the wavelength of 461 nm. The MOT is loaded via a 32 cm long spin-flip type Zeeman slower which enhances the MOT population by a factor of 22. The total laser power available in our experiment is about 300 mW. We have trapped 1.6 × 108 88Sr atoms with a 679nm and 707 nm repumping laser. The two repumping lasers enhance the trap population and trap lifetime by factors of 11 and 7, respectively. The 88Sr cloud has a temperature of about 2.3 mK, measured by recording the time evolution of the absorption signal.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.