Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE MTT-S International Microwave Symposium digest

A Josephson Traveling Wave Parametric Amplifier for Quantum Coherent Signal Processing

Michael Haider, Johannes A. Russer, J.H. Abundis-Patino, Christian Jirauschek, P. Russer

Published Jun 1, 2019• 7 citations
Publisher

Abstract

Josephson traveling wave parametric amplifiers have enabled ultra-sensitive detection of microwave photons in radio astronomy and real-time readout of superconducting quantum bits. To achieve a large gain, the interaction time with the non-linearity of the amplifier needs to be maximized. Traveling wave parametric amplifiers exhibit long interaction times by providing long propagation paths, enabling a greater gain and higher bandwidths than other microwave parametric amplifiers. In the case of the degenerate Josephson parametric amplifier (DJPA) below threshold of parametric oscillation, a squeezed vacuum state can be generated, and above threshold a second bifurcation point exists, where the device generates amplitude squeezed radiation.

DOI
10.1109/mwsym.2019.8700875

Related papers

Josephson Traveling Wave Parametric Amplifiers as non-classical light source for Microwave Quantum Illumination

Luca Fasolo, Angelo Greco, Emanuele Enrico +4 more

Detection of low-reflectivity objects can be enriched via the so-called quantum illumination procedure. In order that this quantum procedure outperforms classical detection protocols, entangled states of microwave radiation are initially required. In this paper, we discuss the role of Josephson Traveling Wave Parametric Amplifiers (JTWPAs), based on circuit-QED components, as suitable sources of a two-mode squeezed vacuum state, a special signal-idler entangled state. The obtained wide bandwidth makes the JTWPA an ideal candidate for generating quantum radiation in quantum metrology and information processing applications.

arXiv:2106.00522•Measurement Sensors•Sep 22, 2021•22 citations

Microwave Quantum Radar using a Josephson Traveling Wave Parametric Amplifier

Patrizia Livreri, Emanuele Enrico, Luca Fasolo +6 more

Detection of low-reflectivity objects can be improved by the so-called Quantum Illumination (QI) procedure. However, quantum detection error probability exponentially decays with the source bandwidth. The Josephson Parametric Amplifiers (JPAs) technology utilized as a source, generating pairs of entangled signals called two-mode squeezed vacuum states, shows a very narrow bandwidth limiting the operation of the Microwave Quantum Illumination (MQI) systems. In this paper, for the first time, a microwave quantum radar setup based on quantum illumination protocol and using a Josephson Traveling Wave Parametric Amplifier (JTWPA) is proposed. We experimentally demonstrate the generation and control of three-wave mixing modes produced by a JTWPA, key enabler radiation source for MQI schemes. Measurement results of the developed JTWPA, pumped at 12 GHz, show the capability to generate entangled modes in the X-band, making our MQI system a promising candidate for the detection of stealth objects.

arXiv:2111.03409•IEEE Radar Conference (RadarConf)•Mar 21, 2022•22 citations

Circuit Design and Experimental Characterization of a Josephson Traveling-Wave Parametric Amplifier

Christoph Kissling

Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.

•Feb 24, 2026•0 citations

Modeling of Josephson Traveling Wave Parametric Amplifiers

Claudio Guarcello, Guerino Avallone, C. Barone +39 more

The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.

IEEE Transactions on Applied Superconductivity•Oct 14, 2022•18 citations

Flux-Driven Josephson Traveling-Wave Parametric Amplifier

Alexander B Zorin

With potentially quantum limited performance and wide frequency bandwidth, traveling-wave Josephson parametric amplifiers (TWJPAs) based on superconducting circuits are in urgent demand for quantum information processing. This study designs a TWJPA in which the interacting pump and signal/idler microwaves propagate with similar phase velocities through two different transmission lines, thereby enabling parametric gain. Such operation is possible due to a chain of SQUIDs that form the signal transmission line, which is magnetically coupled to a separate pump $L\phantom{\rule{0}{0ex}}C$ line. The proposed circuit may greatly simplify the measurement setup and solve the problem of pump depletion.

arXiv:1804.09109•Physical Review Applied•Oct 23, 2019•61 citations

A near-ideal degenerate parametric amplifier

Daniel J. Parker, Mykhailo Savytskyi, Wyatt Vine +5 more

Degenerate parametric amplifiers (DPAs) exhibit the unique property of phase-sensitive gain and can be used to noiselessly amplify small signals or squeeze field fluctuations beneath the vacuum level. In the microwave domain, these amplifiers have been utilized to measure qubits in elementary quantum processors, search for dark matter, facilitate high-sensitivity spin resonance spectroscopy and have even been proposed as the building blocks for a measurement based quantum computer. Until now, microwave DPAs have almost exclusively been made from nonlinear Josephson junctions, which exhibit high-order nonlinearities that limit their dynamic range and squeezing potential. In this work we investigate a new microwave DPA that exploits a nonlinearity engineered from kinetic inductance. The device has a simple design and displays a dynamic range that is four orders of magnitude greater than state-of-the-art Josephson DPAs. We measure phase sensitive gains up to 50 dB and demonstrate a near-quantum-limited noise performance. Additionally, we show that the higher-order nonlinearities that limit other microwave DPAs are almost non-existent for this amplifier, which allows us to demonstrate its exceptional squeezing potential by measuring the deamplification of coherent states by as much as 26 dB.

arXiv:2108.10471•Aug 24, 2021•14 citations
Josephson traveling wave parametric amplifiers have enabled ultra-sensitive detection of microwave photons in radio astronomy and real-time readout of superconducting quantum bits. To achieve a large gain, the interaction time with the non-linearity of the amplifier needs to be maximized. Traveling wave parametric amplifiers exhibit long interaction times by providing long propagation paths, enabling a greater gain and higher bandwidths than other microwave parametric amplifiers. In the case of the degenerate Josephson parametric amplifier (DJPA) below threshold of parametric oscillation, a squeezed vacuum state can be generated, and above threshold a second bifurcation point exists, where the device generates amplitude squeezed radiation.
Detection of low-reflectivity objects can be enriched via the so-called quantum illumination procedure. In order that this quantum procedure outperforms classical detection protocols, entangled states of microwave radiation are initially required. In this paper, we discuss the role of Josephson Traveling Wave Parametric Amplifiers (JTWPAs), based on circuit-QED components, as suitable sources of a two-mode squeezed vacuum state, a special signal-idler entangled state. The obtained wide bandwidth makes the JTWPA an ideal candidate for generating quantum radiation in quantum metrology and information processing applications.
Detection of low-reflectivity objects can be improved by the so-called Quantum Illumination (QI) procedure. However, quantum detection error probability exponentially decays with the source bandwidth. The Josephson Parametric Amplifiers (JPAs) technology utilized as a source, generating pairs of entangled signals called two-mode squeezed vacuum states, shows a very narrow bandwidth limiting the operation of the Microwave Quantum Illumination (MQI) systems. In this paper, for the first time, a microwave quantum radar setup based on quantum illumination protocol and using a Josephson Traveling Wave Parametric Amplifier (JTWPA) is proposed. We experimentally demonstrate the generation and control of three-wave mixing modes produced by a JTWPA, key enabler radiation source for MQI schemes. Measurement results of the developed JTWPA, pumped at 12 GHz, show the capability to generate entangled modes in the X-band, making our MQI system a promising candidate for the detection of stealth objects.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.
With potentially quantum limited performance and wide frequency bandwidth, traveling-wave Josephson parametric amplifiers (TWJPAs) based on superconducting circuits are in urgent demand for quantum information processing. This study designs a TWJPA in which the interacting pump and signal/idler microwaves propagate with similar phase velocities through two different transmission lines, thereby enabling parametric gain. Such operation is possible due to a chain of SQUIDs that form the signal transmission line, which is magnetically coupled to a separate pump $L\phantom{\rule{0}{0ex}}C$ line. The proposed circuit may greatly simplify the measurement setup and solve the problem of pump depletion.
Degenerate parametric amplifiers (DPAs) exhibit the unique property of phase-sensitive gain and can be used to noiselessly amplify small signals or squeeze field fluctuations beneath the vacuum level. In the microwave domain, these amplifiers have been utilized to measure qubits in elementary quantum processors, search for dark matter, facilitate high-sensitivity spin resonance spectroscopy and have even been proposed as the building blocks for a measurement based quantum computer. Until now, microwave DPAs have almost exclusively been made from nonlinear Josephson junctions, which exhibit high-order nonlinearities that limit their dynamic range and squeezing potential. In this work we investigate a new microwave DPA that exploits a nonlinearity engineered from kinetic inductance. The device has a simple design and displays a dynamic range that is four orders of magnitude greater than state-of-the-art Josephson DPAs. We measure phase sensitive gains up to 50 dB and demonstrate a near-quantum-limited noise performance. Additionally, we show that the higher-order nonlinearities that limit other microwave DPAs are almost non-existent for this amplifier, which allows us to demonstrate its exceptional squeezing potential by measuring the deamplification of coherent states by as much as 26 dB.