Degenerate parametric amplifiers (DPAs) exhibit the unique property of phase-sensitive gain and can be used to noiselessly amplify small signals or squeeze field fluctuations beneath the vacuum level. In the microwave domain, these amplifiers have been utilized to measure qubits in elementary quantum processors, search for dark matter, facilitate high-sensitivity spin resonance spectroscopy and have even been proposed as the building blocks for a measurement based quantum computer. Until now, microwave DPAs have almost exclusively been made from nonlinear Josephson junctions, which exhibit high-order nonlinearities that limit their dynamic range and squeezing potential. In this work we investigate a new microwave DPA that exploits a nonlinearity engineered from kinetic inductance. The device has a simple design and displays a dynamic range that is four orders of magnitude greater than state-of-the-art Josephson DPAs. We measure phase sensitive gains up to 50 dB and demonstrate a near-quantum-limited noise performance. Additionally, we show that the higher-order nonlinearities that limit other microwave DPAs are almost non-existent for this amplifier, which allows us to demonstrate its exceptional squeezing potential by measuring the deamplification of coherent states by as much as 26 dB.
Degenerate parametric amplifiers (DPAs) exhibit the unique property of phase-sensitive gain and can be used to noiselessly amplify small signals or squeeze field fluctuations beneath the vacuum level. In the microwave domain, these amplifiers have been utilized to measure qubits in elementary quantum processors, search for dark matter, facilitate high-sensitivity spin resonance spectroscopy and have even been proposed as the building blocks for a measurement based quantum computer. Until now, microwave DPAs have almost exclusively been made from nonlinear Josephson junctions, which exhibit high-order nonlinearities that limit their dynamic range and squeezing potential. In this work we investigate a new microwave DPA that exploits a nonlinearity engineered from kinetic inductance. The device has a simple design and displays a dynamic range that is four orders of magnitude greater than state-of-the-art Josephson DPAs. We measure phase sensitive gains up to 50 dB and demonstrate a near-quantum-limited noise performance. Additionally, we show that the higher-order nonlinearities that limit other microwave DPAs are almost non-existent for this amplifier, which allows us to demonstrate its exceptional squeezing potential by measuring the deamplification of coherent states by as much as 26 dB.
Microwave parametric amplifiers operating at the quantum noise limit have become indispensable tools for a range of cryogenic quantum technologies. These amplifiers are typically constructed from nonlinear Josephson junctions, which limit the ability to amplify high-power signals. This study reports a device based instead on the weakly nonlinear kinetic inductance intrinsic to a superconducting film of niobium titanium nitride. The amplifier offers large phase-sensitive gain and high power handling, plus a simple design and fabrication process. As it contains no junctions, it is robust to electrostatic discharge and potentially operable under high temperatures and large magnetic fields.
Parametric converters are parametric amplifiers that mix two spatially separate nondegenerate modes and are commonly used for amplifying and squeezing microwave signals in quantum computing and sensing. In Josephson parametric converters, the strong localized nonlinearity of the Josephson junction limits the amplification and squeezing, as well as the dynamic range, in current devices. In contrast, a weak distributed nonlinearity can provide higher gain and dynamic range, when implemented as a kinetic inductance (KI) nanowire of a dirty superconductor, and has additional benefits such as resilience to magnetic field, higher-temperature operation, and simplified fabrication. Here, we propose, demonstrate, and analyze the performance of a KI parametric converter that relies on the weak distributed nonlinearity of a Nb-Ti-N KI nanowire. The device utilizes three-wave mixing induced by a dc current bias. We demonstrate its operation as a nondegenerate parametric amplifier with high phase-sensitive gain, reaching two-mode amplification and deamplification of approximately 30 dB for two resonances separated by 0.8 GHz, in excellent agreement with our theory of the device. We observe a dynamic range of $\ensuremath{-}108$ dBm at 30 dB gain. Our device can significantly broaden applications of quantum-limited signal processing devices including phase-preserving amplification and two-mode squeezing.
We present the results of an experimental effort to generate squeezed microwave radiation using the phase-sensitive gain of a Josephson parametric amplifier. To facilitate the interpretation of the experimental results, we first present a discussion of the theory of microwave squeezing via Josephson parametric amplifiers. This is followed by a detailed description of the device fabricated for our experiment. Experimental results are then presented for the device used in both the doubly degenerate or four-photon mode and for the degenerate or three-photon mode. We have observed parametric deamplification of signals by more than 8 dB. We have demonstrated squeezing of 4.2-K thermal noise. When operated at 0.1 K, the amplifier exhibits an excess noise of 0.28 K when referred to the input. This is smaller than the vacuum fluctuation noise level \ensuremath{\Elzxh}\ensuremath{\omega}/2k=0.47 K. The amplifier is thus quieter than a linear phase-insensitive amplifier in principle can be.
Superconducting parametric amplifiers are crucial components in microwave quantum circuits for enabling quantum-limited signal readout.The best-performing such amplifiers are often based on Josephson junctions, which however are sensitive to magnetic fields.Therefore, they require magnetic shields and are not easily integratable with other quantum systems that operate within magnetic fields, such as spinensemble quantum memories.To tackle this challenge, we develop a kinetic inductance-based parametric amplifier featuring a NbN nanobridge instead of Josephson junctions, which provides the desired nonlinearity for a strong parametric gain up to 42 dB.The added noise of this nanobridge kinetic-inductance parametric amplifier (hereby referred to as NKPA) is calibrated and found to be 0.59 ± 0.03 quanta for phase-preserving amplification, approaching the quantum limit of 0.5 quanta.Most importantly, we show that such excellent noise performance is preserved in an in-plane magnetic field up to 427 mT, the maximum field available in our experiment.This magnetic-field-resilient parametric amplifier presents an opportunity towards addressing single electron-spin resonance and more efficient search for axions as well as Majorana fermions.
Josephson junction parametric amplifiers have become essential tools for microwave quantum circuit readout with minimal added noise. Even after improving at an impressive rate in the past decade, they remain vulnerable to magnetic fields, which limits their use in many applications such as spin qubits, Andreev and molecular magnet devices, dark matter searches, etc. Kinetic inductance materials, such as granular aluminum (grAl), offer an alternative source of nonlinearity with innate magnetic field resilience. We present a nondegenerate amplifier made of two coupled grAl resonators resilient to in-plane magnetic fields up to 1T. It offers 20 dB of gain close to the quantum limit of added noise, with a gain-bandwidth product of 28 MHz and -110 dBm input saturation power.
A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.