We present a planar qubit design based on a superconducting circuit that we call concentric transmon. While employing a straightforward fabrication process using Al evaporation and lift-off lithography, we observe qubit lifetimes and coherence times in the order of 10 μs. We systematically characterize loss channels such as incoherent dielectric loss, Purcell decay and radiative losses. The implementation of a gradiometric SQUID loop allows for a fast tuning of the qubit transition frequency and therefore for full tomographic control of the quantum circuit. Due to the large loop size, the presented qubit architecture features a strongly increased magnetic dipole moment as compared to conventional transmon designs. This renders the concentric transmon a promising candidate to establish a site-selective passive direct Ẑ coupling between neighboring qubits, being a pending quest in the field of quantum simulation.
This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian parameters and optimize component geometries. The qubit was fabricated and then characterized at 20 mK, allowing for a comparison between simulated and measured qubit parameters. Good agreement was found for transition frequencies and anharmonicities (within 1% and 10% respectively) while coupling strengths exhibited larger discrepancies (30%). We discuss potential causes for measured coherence times falling below expectations (T1 ∼1-2 μs) and propose strategies for future design improvements. Notably, we demonstrate the application of a hybrid 3D-2D simulation approach for energy participation ratio evaluation, yielding a more accurate estimation of dielectric losses. This work represents an important first step in developing planar Quantum Non-Demolition (QND) single-photon counters for dark matter searches, particularly for axion and dark photon detection schemes.
The remarkable advances of quantum computation technology with superconducting qubits based on circuit quantum electrodynamics (QED) architecture have been achieved by improving control, protection and measurement of the quantum states at the same time. At the heart of all these quantum operations, the significant enhancement of the qubit coherence time during the last decades was the key. Even after all these advances, the coherence and relaxation time of superconducting qubits still requires further improvements toward fault-tolerant quantum computation. Here, we report our observation of a strongly enhanced lifetime of an in-situ tunable superconducting transmon qubit on a silicon substrate that is embedded in a three-dimensional copper cavity. We measured a lifetime of the qubit of up to 84 µs, which is the best reported value of an in-situ tunable transmon on a silicon substrate. In our experiment, the in-situ frequency tunability over a broad range enabled the Purcell factor to be controlled continuously by detuning the qubit frequency against the resonator frequency in the strong dispersive regime. The silicon substrate has its own importance because the substrate should be fully compatible with the conventional semiconductor processes so that scalability and multi-chip module capability are guaranteed. In order to control the Purcell factor with another parameter, we displaced the qubit position in the cavity and observed a longer relaxation time with a smaller coupling coefficient. We believe that this systematic study and the control technique of the Purcell effect in the circuit QED design, together with minimizing the microwave photon loss through an improvement of the fabrication, will contribute to the realization of a practical large-scale quantum computer based on superconducting qubit technology.
We demonstrate a planar, tunable superconducting qubit with energy relaxation times up to 44 μs. This is achieved by using a geometry designed to both minimize radiative loss and reduce coupling to materials-related defects. At these levels of coherence, we find a fine structure in the qubit energy lifetime as a function of frequency, indicating the presence of a sparse population of incoherent, weakly coupled two-level defects. We elucidate this defect physics by experimentally varying the geometry and by a model analysis. Our "Xmon" qubit combines facile fabrication, straightforward connectivity, fast control, and long coherence, opening a viable route to constructing a chip-based quantum computer.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an
Al/AlOx/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of
ω01=5.0122 GHz and an anharmonicity of
α/2π=−202.4 MHz , corresponding to
EJ/EC≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of
g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of
QL=6127 and a Purcell limit of
T1Purcell≈82 μs . Time-domain measurements yield coherence times of
T1=17.4 μs and
T2∗=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
Frequency-tunable superconducting transmon qubits are a cornerstone of scalable quantum processors, yet their performance is often degraded by sensitivity to low-frequency flux noise. Here we present a doubly-connected gradiometric transmon (the ``8-mon") that incorporates a nano-airbridge to link its two loops. This design preserves full electrical tunability and remains fully compatible with standard X-mon control and readout, requiring no additional measurement overhead. The airbridge interconnect eliminates dielectric loss, which enables the 8-mon to achieve both energy relaxation times
T1 comparable to reference X-mons and, in the small flux-bias regime, a nearly threefold enhancement in Ramsey coherence time
T2∗. This improved
T2∗ reaches the same order as
T1 without employing echo decoupling. The device also exhibits superior long-term frequency stability even without any magnetic field shielding. We develop a spatially correlated flux-noise model whose simulations quantitatively reproduce the experimental coherence trends, revealing the coexistence of short- and long-correlation-length magnetic noise in the superconducting chip environment. By unifying high tunability with intrinsic flux-noise suppression through a robust geometric design, the 8-mon provides a practical pathway toward more coherent and stable superconducting quantum processors.