Reproducibility of Al/AlO x /Al Josephson junctions is a challenge for scaling up superconducting quantum processors. The frequency uncertainty of the transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction microstructure and electrical properties. Here, we present a solution for this problem using the post-fabrication Josephson junction thermal annealing process. The developed thermal post-exposure method allows not only to increase the junction resistance by 175%, but also to decrease by 60% with a step of 10% in R n , which opens up new possibilities for tuning the frequency of qubits. The resistance is shown to be strongly temperature dependent, and is weakly dependent on the holding time. The linear dimensions of the electrodes and the sidewalls contribution to the total JJ area also have a significant impact on the final resistance after annealing. Finally, a theoretical model of the structure modification in a tunnel barrier with changes in oxygen concentration gradient is proposed. The proposed thermal annealing approach can be used to form stable and reproducible tunnel barriers and scalable frequency trimming for widely used fixed-frequency transmon qubits.
A thermal annealing technique for Nb∕Al–AlOx∕Nb Josephson devices based on laser heating is presented. This technique allows “locally” modifying the Josephson critical current density, which is not possible using standard procedures based on oven or hot plate heating. In fact, the heating of a single circuit element with a good spatial resolution is possible. At room temperature, the selected junction is exposed to a focused Ar+ laser beam aligned by an optical system. A thermographic imaging allows controlling the temperature distribution on the whole chip. Experimental results on high quality Josephson junction measured in liquid helium have shown a continuous reduction of the critical current density up to about 40%. Neighboring junctions have not exhibited any measurable change ensuring the capability to locally modify the Josephson critical current density. As first application, the present technique has been employed to recover noisy dc superconducting quantum interference device magnetometers with nonoptimal critical current values obtaining a reduction of the spectrum density of magnetic field noise from about 30to2.5fT∕Hz1∕2.
We demonstrate a superconducting transmon qubit in which a Josephson junction has been engineered to act as its own parallel shunt capacitor. This merged-element transmon potentially offers a smaller footprint than conventional transmons. Because it concentrates the electromagnetic energy inside the junction, it reduces the relative electric field participation from other interfaces. By combining micrometer-scale
Al/
AlOx/
Al junctions with long oxidations, we produce functional devices with
EJ/EC in the low-transmon regime (${E}_{J}/{E}_{C}\ensuremath{\lesssim}30$). Cryogenic
I-
V measurements show a sharp
dI/dV structure with low subgap conduction. Qubit spectroscopy of tunable versions shows a small number of avoided level crossings, suggesting the presence of two-level systems. We observe mean
T1 times typically in the range of $10--90\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{s}$, with some annealed devices exhibiting ${T}_{1}>100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{s}$ over several hours. The results suggest that energy relaxation in conventional small-junction transmons is not limited by junction loss.