Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Single-photon sources in diamond, silicon carbide and gallium nitride

Yu Zhou

Published Jan 1, 2018• 0 citations
Publisher

Abstract

Solid-state single-photon sources are the central blocks for many scalable quantum applications including quantum computing, quantum key distributions, and quantum simulations. Over the years, diverse quantum emitters have been studied. This thesis endeavored investigations into single-photon sources in diamond, silicon carbide and gallium nitride in three directions: Firstly, identification of the single-photon sources that have never been reported before and fabrication technique for scalable single germanium vacancy centers in diamond. Telecom wavelength single photon sources have been found in both gallium nitride and silicon carbide. More importantly, those emitters work even at room temperature and are promising for quantum key distribution applications in the future. Secondly, the spin properties study of the single silicon vacancy in diamond: the silicon vacancy optical transition has been coherently controlled in the work. The optical Rabi oscillations in the time domain have been observed. The ultrafast spin control of the silicon vacancy has been also achieved. Thirdly, quantum applications of the divacancy spins in silicon carbide: nano-scale thermometry based on the quantum control of the divacancy spin in silicon carbide has been introduced. Especially, we found a self-protected effect that the transverse strain can protect the spin from the local magnetic field and enables longer coherence time. Finally, some possible directions have been discussed.

DOI
10.32657/10220/47535

Related papers

Single Defects in Semiconductors for Quantum Information Processing and Sensing

David J. Christle

This thesis describes studies on atomic point defects in semiconductors for applications in quantum information. In particular, its focus is on defects whose energy levels reside deep within the bandgap certain semiconductors because these systems can behave like artificial trapped atoms in the solid state, possessing optical addressability, long coherence times, and the ability to be manipulated at microwave frequencies. The most prominent defect in this field of study is the diamond nitrogen-vacancy center, whose functionality is well-known to persist to ambient temperature. The first part of this thesis investigates the persistence of this functionality to temperatures upwards of 600 K. Importantly, these investigations also demonstrate that the diamond nitrogen-vacancy center can be a sensitive thermometer (~10 mK/Hz^(1/2)) over a wide range of temperatures with nanoscale spatial resolution. The latter part of the thesis describes experimental measurements of divacancy defects in silicon carbide, a potential alternative materials host to diamond with established wafer-scale growth and microfabrication capabilities. Single divacancy spins are isolated and coherently controlled for the first time in the 4H polytype of silicon carbide, and the divacancy's coherence is shown to be a remarkably long T2 = 1.2 ms at T = 20 K. The last chapter extends these results by isolating single divacancies in the 3C polytype, experimentally demonstrating a qualitative and quantitative model of their spin and orbital dynamics, and revealing the divacancy's excited state level structure in both the 3C and 4H polytypes using resonant laser techniques. These excited state transitions are shown to posses a structure identical to the diamond nitrogen-vacancy center and a subset are shown to have favorable cycling properties. The location of a clear spin-photon interface has important implications for high-fidelity quantum state readout and photon-based entanglement schemes that use divacancy spins.

•Jan 1, 2016•1 citation

Toward the Realization of Single-Photon Sources for Radiometry Applications at Room Temperature

Kee Suk Hong, Hee‐Jin Lim, Dong-Hoon Lee +5 more

Single photon sources based on single emitters such as 2D materials and impurities in diamond are of great interest for many application fields including quantum communication, quantum metrology and quantum sensing. In photometry and radiometry, a single photon source, having the ability to emit only one photon in a well-defined time and frequency domain, represents a promising candidate to realize a photon number-based primary standard for quantum radiometry. At the Korea Research Institute of Standards and Science (KRISS), we have realized three kinds of single photon sources based on various single emitters at room temperature: silicon vacancy in diamond, defects in gallium nitride (GaN), and vacancy in hexagonal boron nitride (hBN). We found common factors related with the relaxation times of the internal states that indirectly affect the photon number stability. We observed a high photon number stability in the GaN emitter due to faster relaxation times compared with the hBN emitter, which on the other hand produced high rates of photons per second (> 106). Moreover, we demonstrate repeatable radiant flux measurements of a bright hBN single photon emitter for a wide radiant flux range from a few tens of femtowatts to one picowatt.

arXiv:2007.10616•IEEE Transactions on Instrumentation and Measurement•Jan 1, 2023•3 citations

Solid-State Quantum Memories for Near-Term Quantum Repeaters

Madison Sutula

Over the past decade, quantum computers have emerged as a promising technology to enable transformational advances in information processing and communication and solve problems that are intractable to classical computers. While there is great promise in linking quantum computers together over long distances via quantum channels, these technologies are still under development. Solid-state emitters with coherent spin-photon interfaces, long spin lifetimes, and narrow optical transitions are a leading platform for use as quantum memories in networked quantum repeaters. However, while such emitters have already enabled advanced quantum networking demonstrations in laboratory settings, applying these devices as useful memory devices at scale is a key outstanding challenge. In this thesis, we experimentally investigate solid-state quantum memories for quantum information applications. First, we develop experimental techniques to characterize solid-state emitters with high throughput, enabling both better understanding of the distribution of emitter properties and improved feedback on material preparation and device fabrication. Next, we implement quantum frequency conversion to create a coherent spin-photon interface between silicon-vacancy centers in diamond and optical photons in the low-loss telecom band. Finally, we investigate color centers in other engineering materials, including silicon and silicon carbide, to better understand the fundamental trade space of requirements for solid-state hosts. Together, these efforts represent a significant advance in creating, controlling, and deploying telecom-compatible spin interfaces, paving the way for memory-enabled quantum repeaters.

•May 1, 2025•0 citations

Diamond based nanoelectronics and imaging

Kerem Bray

To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.

•Jan 1, 2019•0 citations

Coherent Control of Nitrogen-Vacancy Center Spins in Silicon Carbide at Room Temperature

Junfeng Wang, Fei-Fei Yan, Qiang Li +12 more

Solid-state color centers with manipulatable spin qubits and telecom-ranged fluorescence are ideal platforms for quantum communications and distributed quantum computations. In this work, we coherently control the nitrogen-vacancy (NV) center spins in silicon carbide at room temperature, in which telecom-wavelength emission is detected. We increase the NV concentration sixfold through optimization of implantation conditions. Hence, coherent control of NV center spins is achieved at room temperature, and the coherence time T_{2} can be reached to around 17.1 μs. Furthermore, an investigation of fluorescence properties of single NV centers shows that they are room-temperature photostable single-photon sources at telecom range. Taking advantage of technologically mature materials, the experiment demonstrates that the NV centers in silicon carbide are promising platforms for large-scale integrated quantum photonics and long-distance quantum networks.

arXiv:1909.12481•Physical Review Letters•Jun 1, 2020•182 citations

Quantum light sources based on color centers in diamond and silicon carbide

Norikazu Mizuochi, Naoya Morioka

This chapter is organized as follows: The first half of the chapter is about quantum light sources based on diamond color centers. After the introduction in Section 7.1, we discuss the optical properties of the NV center and other color centers in diamond, indistinguishable photon sources in diamond, entanglement between photon and spin in diamond, electroluminescence (EL) of color centers in diamond, and diamond nanophotonic devices. The second half of the chapter is about quantum light sources based on color centers in SiC. Mainly, fundamental characteristics of silicon vacancies and divacancies are presented in each section.

SPIE eBooks•Jul 12, 2024•0 citations
Solid-state single-photon sources are the central blocks for many scalable quantum applications including quantum computing, quantum key distributions, and quantum simulations. Over the years, diverse quantum emitters have been studied. This thesis endeavored investigations into single-photon sources in diamond, silicon carbide and gallium nitride in three directions: Firstly, identification of the single-photon sources that have never been reported before and fabrication technique for scalable single germanium vacancy centers in diamond. Telecom wavelength single photon sources have been found in both gallium nitride and silicon carbide. More importantly, those emitters work even at room temperature and are promising for quantum key distribution applications in the future. Secondly, the spin properties study of the single silicon vacancy in diamond: the silicon vacancy optical transition has been coherently controlled in the work. The optical Rabi oscillations in the time domain have been observed. The ultrafast spin control of the silicon vacancy has been also achieved. Thirdly, quantum applications of the divacancy spins in silicon carbide: nano-scale thermometry based on the quantum control of the divacancy spin in silicon carbide has been introduced. Especially, we found a self-protected effect that the transverse strain can protect the spin from the local magnetic field and enables longer coherence time. Finally, some possible directions have been discussed.
This thesis describes studies on atomic point defects in semiconductors for applications in quantum information. In particular, its focus is on defects whose energy levels reside deep within the bandgap certain semiconductors because these systems can behave like artificial trapped atoms in the solid state, possessing optical addressability, long coherence times, and the ability to be manipulated at microwave frequencies. The most prominent defect in this field of study is the diamond nitrogen-vacancy center, whose functionality is well-known to persist to ambient temperature. The first part of this thesis investigates the persistence of this functionality to temperatures upwards of 600 K. Importantly, these investigations also demonstrate that the diamond nitrogen-vacancy center can be a sensitive thermometer (~10 mK/Hz^(1/2)) over a wide range of temperatures with nanoscale spatial resolution. The latter part of the thesis describes experimental measurements of divacancy defects in silicon carbide, a potential alternative materials host to diamond with established wafer-scale growth and microfabrication capabilities. Single divacancy spins are isolated and coherently controlled for the first time in the 4H polytype of silicon carbide, and the divacancy's coherence is shown to be a remarkably long T2 = 1.2 ms at T = 20 K. The last chapter extends these results by isolating single divacancies in the 3C polytype, experimentally demonstrating a qualitative and quantitative model of their spin and orbital dynamics, and revealing the divacancy's excited state level structure in both the 3C and 4H polytypes using resonant laser techniques. These excited state transitions are shown to posses a structure identical to the diamond nitrogen-vacancy center and a subset are shown to have favorable cycling properties. The location of a clear spin-photon interface has important implications for high-fidelity quantum state readout and photon-based entanglement schemes that use divacancy spins.
Single photon sources based on single emitters such as 2D materials and impurities in diamond are of great interest for many application fields including quantum communication, quantum metrology and quantum sensing. In photometry and radiometry, a single photon source, having the ability to emit only one photon in a well-defined time and frequency domain, represents a promising candidate to realize a photon number-based primary standard for quantum radiometry. At the Korea Research Institute of Standards and Science (KRISS), we have realized three kinds of single photon sources based on various single emitters at room temperature: silicon vacancy in diamond, defects in gallium nitride (GaN), and vacancy in hexagonal boron nitride (hBN). We found common factors related with the relaxation times of the internal states that indirectly affect the photon number stability. We observed a high photon number stability in the GaN emitter due to faster relaxation times compared with the hBN emitter, which on the other hand produced high rates of photons per second (> 106). Moreover, we demonstrate repeatable radiant flux measurements of a bright hBN single photon emitter for a wide radiant flux range from a few tens of femtowatts to one picowatt.
Over the past decade, quantum computers have emerged as a promising technology to enable transformational advances in information processing and communication and solve problems that are intractable to classical computers. While there is great promise in linking quantum computers together over long distances via quantum channels, these technologies are still under development. Solid-state emitters with coherent spin-photon interfaces, long spin lifetimes, and narrow optical transitions are a leading platform for use as quantum memories in networked quantum repeaters. However, while such emitters have already enabled advanced quantum networking demonstrations in laboratory settings, applying these devices as useful memory devices at scale is a key outstanding challenge. In this thesis, we experimentally investigate solid-state quantum memories for quantum information applications. First, we develop experimental techniques to characterize solid-state emitters with high throughput, enabling both better understanding of the distribution of emitter properties and improved feedback on material preparation and device fabrication. Next, we implement quantum frequency conversion to create a coherent spin-photon interface between silicon-vacancy centers in diamond and optical photons in the low-loss telecom band. Finally, we investigate color centers in other engineering materials, including silicon and silicon carbide, to better understand the fundamental trade space of requirements for solid-state hosts. Together, these efforts represent a significant advance in creating, controlling, and deploying telecom-compatible spin interfaces, paving the way for memory-enabled quantum repeaters.
To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
Solid-state color centers with manipulatable spin qubits and telecom-ranged fluorescence are ideal platforms for quantum communications and distributed quantum computations. In this work, we coherently control the nitrogen-vacancy (NV) center spins in silicon carbide at room temperature, in which telecom-wavelength emission is detected. We increase the NV concentration sixfold through optimization of implantation conditions. Hence, coherent control of NV center spins is achieved at room temperature, and the coherence time T_{2} can be reached to around 17.1 μs. Furthermore, an investigation of fluorescence properties of single NV centers shows that they are room-temperature photostable single-photon sources at telecom range. Taking advantage of technologically mature materials, the experiment demonstrates that the NV centers in silicon carbide are promising platforms for large-scale integrated quantum photonics and long-distance quantum networks.
This chapter is organized as follows: The first half of the chapter is about quantum light sources based on diamond color centers. After the introduction in Section 7.1, we discuss the optical properties of the NV center and other color centers in diamond, indistinguishable photon sources in diamond, entanglement between photon and spin in diamond, electroluminescence (EL) of color centers in diamond, and diamond nanophotonic devices. The second half of the chapter is about quantum light sources based on color centers in SiC. Mainly, fundamental characteristics of silicon vacancies and divacancies are presented in each section.