Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Web of Conferences

Spin colour centres in SiC as a material platform for sensing and information processing at ambient conditions

Andrey N. Anisimov, V. A. Soltamov, P. G. Baranov, G. V. Astakhov, Vladimir Dyakonov

Published Jan 1, 2018• 0 citations
Publisher

Abstract

Atomic-scale colour centres in bulk and nanocrystalline SiC are promising systems for quantum photonics compatible with fiber optics, quantum information processing and sensing at ambient conditions. Colour centres which acts as stable single photon sources in SiC can be key elements for quantum photonics and communications. It has been shown that there are at least two families of colour centres in SiC with S = 1 and S = 3/2, which have the property of optical alignment of the spin levels even at room temperature and above. The spin state can be initialized, manipulated and readout by means of optically detected magnetic resonance (ODMR), level anticrossing and cross-relaxation. Recently, we observed the effects of “hole burning” in the ODMR spectra, which made it possible to narrow the ODMR line by approximately an order of magnitude, which substantially increases the possibilities of technological applications of spin centres.

DOI
10.1051/epjconf/201819004001

Related papers

Quantum Communication and Sensing Based on Colour Centres in Wide-Bandgap Semiconductors

Andrew Anthony Bettiol, Sviatoslav Ditalia Tchernij, Takeshi Ohshima +1 more

Quantum photonics is an emerging field of photonics where single photons are used for applications in quantum computation, quantum communication, and quantum sensing. One of the key enablers of these new technologies is colour centres. Colour centres are isolated defects in crystals that are able to emit single photons and have spin properties that can be exploited for quantum technologies. These properties include high brightness, low photo-bleaching, and room-temperature optically accessible spins. Wide-bandgap semiconductors such as diamond, silicon carbide and gallium nitride, and 2D materials such as h-BN and TMDs are of particular interest as host materials for colour centres. Numerous light emitters have been discovered and documented in these materials. Colour centres typically occur naturally in semiconductors and are often introduced during the growth process. This random distribution of defects is clearly not desirable for making quantum devices as it makes it difficult to process the materials and introduce structures that interact with these defects such as electrical contacts. The key technology that allows for the precise engineering of colour centres and other quantum defects in materials is ion implantation. Ion implantation utilizes energetic ion beams for the modification of electrical, optical, and magnetic properties of materials. It is a key processing step that has been widely used in the semiconductor industry for doping of semiconductors and for creating buried oxides. Ion implanters that are currently used in industry are designed for uniform wafer-level implantation of relatively large fluences of ions with high beam currents. The new quantum technologies, such as quantum computing, require a major paradigm shift in the way in which ion implantation is performed.

CRC Press eBooks•Oct 16, 2024•0 citations

Color centres in diamond from single photon sources to ODMR in cells

Marco Genovese, Ekaterina V. Moreva, P. Traina +6 more

Color centres in diamond represent a very interesting system for realizing single photon emitters, even at room temperature, in particular are attracting an ever-growing interest in quantum optics, quantum information and quantum sensing, due to their appealing photo-physical properties combined with ease of access and manipulation in a solid state system characterized by high transparency and structural stability. Literally hundreds of optically active color centers can be created and controlled in the diamond matrix, to be employed either as bright and stable single-photon sources or individual spin systems with optical readout, with record performances even at room temperature. In concurrence with the remarkable results obtained at the state of the art on the exploitation of the unique properties of the negatively-charged nitrogen-vacancy complex (NV), new and appealing color centers are continuously being discovered and characterized. In the present contribution, the most recent results obtained by a collaboration among the Italian National Institutes of Metrologic Research (INRiM), the University of Torino and the Italian National Institutes of Nuclear Physics (INFN) will be overviewed and critically assessed in their future perspectives.

Quantum Photonic Devices•Sep 11, 2018•4 citations

Coupling nitrogen vacancy centers in silicon carbide to nanophotonic resonators

Ivan Zhigulin, Konosuke Shimazaki, Samuel M. Stephens +5 more

Silicon carbide (SiC) is a promising platform for scalable quantum technologies owing to its well-established, wafer-scale industrial processing. SiC also hosts a variety of optically active color centres including the nitrogen vacancy defect that has a spin-triplet ground state. However, strong phonon coupling in the infrared range limits photon extraction from these defects. Here, we use nanophotonic structures, specifically micro-pillar and micro-disk resonators, to enhance optical collection and spin-readout. The micro-pillar geometry yields a 4-fold increase in photon collection, accompanied by a 2.4-fold reduction in spectral noise in optically detected magnetic resonance measurements. Consequently, the magnetic field sensitivity is improved by 24%. The large mode volume of the micro-disk supports resonances spanning 1150-1250 nm, enabling broadband coupling to nitrogen vacancy emission lines. Our results demonstrate that fabrication of scalable photonic structures efficiently improves performance of silicon carbide color centers for integrated quantum light generation and sensing.

physics.opticsCross-listedarXiv:2602.21505•Feb 26, 2026

Telecom-band quantum memory with chlorine defects in silicon carbide

A. N. Anisimov, K. Mavridou, A. V. Mathews +2 more

Realization of quantum memory with a photonic interface in the telecommunication bands in a wafer-scalable platform is a central requirement for long-distance quantum networks. Silicon carbide (SiC) provides a technologically mature host for integrated quantum photonics, yet only a limited number of defects combine spin functionality with telecom emission. Here we report on chlorine-based defects in 4H-SiC as a platform for telecom-band quantum memory. The emission of these defects spans the entire telecommunication range with zero-phonon lines in the O- and C-bands and a Debye-Waller factor of up to $39 \, \%$. Time-resolved photoluminescence measurements reveal a short excited-state lifetime in the sub-nanosecond range. We demonstrate that these defects are spin-active even at room temperature, exhibiting optically detected magnetic resonances (ODMR) in the sub-GHz frequency range. Using ODMR spectroscopy and Ramsey interferometry, we resolve the hyperfine structure arising from the interaction with $^{35}\mathrm{Cl}$ nuclear spins. The ODMR spectra exhibit complex behaviour in an external magnetic field due to mixing of electron-nuclear spin states, which is well reproduced by our simulations. The spin relaxation and coherence times are in the sub-microsecond range, limited by rapid quenching of the ODMR contrast and attributed to charge-state metastability. The combination of telecom-band emission, coherent spin control and compatibility with wafer-scale fabrication positions Cl-related defects in SiC as a promising platform for chip-scale quantum memories with spin-photon interfaces operating in the fiber-optic telecommunication windows.

quant-pharXiv:2605.03717•May 6, 2026•2 citations

A Scanning Optical Quantum Magnetometer Based on the Hole Burning Phenomenon

Andrey N. Anisimov, R. A. Babunts, Ilia D. Breev +4 more

Abstract A scanning optical quantum magnetometer with submicron spatial resolution is proposed that is based on the phenomenon of hole burning in the signal of optically detected magnetic resonance (ODMR) on atomic-sized color centers in silicon carbide crystals under conditions of spin level saturation by means of additional high-frequency resonance pumping. An increase in the sensitivity is achieved due to narrowing of the ODMR line and increasing slope of the dependence of signal frequency on the magnetic field.

Technical Physics Letters•May 1, 2019•0 citations

Silicon carbide based quantum networking

Jin‐Shi Xu, Chuan‐Feng Li, Guang‐Can Guo

Abstract Silicon carbide (SiC) is an excellent industrially compatible material, which has been widely used in high power electronic devices. Recently, spin defects in SiC have been found to be a high-quality spin-to-photon interface with long spin coherence time and high spin-selective optical transition. Spin states can be initialized and readout with extremely high fidelity. The infrared and even telecom fluorescence is suited for fiber communication with less scatting loss. The bandwidth of intrinsic zero-phonon-line emission can be manipulated by classical electrical devices. The achieved near lifetime-limited optical linewidths greatly increase the indistinguishability of photon emission and facilitate the connection with other narrowband absorption quantum systems, such as cold atoms, trapped ions, and rare-earth dopants in crystals. Moreover, spin defects coupled with photonic nanocavities have been demonstrated, which can greatly enhance the photon emission in the zero-phonon-line. The realization of controllable electron-nuclear spin entanglement further extends the memory-based quantum applications. In this perspective, we will briefly discuss the most recent development of spin defects in SiC. These results show that spin defects in SiC are desirable quantum platforms for quantum networking applications. We also discuss some of the current challenges and possible future development.

Fundamental Research•Jan 18, 2021•16 citations
Atomic-scale colour centres in bulk and nanocrystalline SiC are promising systems for quantum photonics compatible with fiber optics, quantum information processing and sensing at ambient conditions. Colour centres which acts as stable single photon sources in SiC can be key elements for quantum photonics and communications. It has been shown that there are at least two families of colour centres in SiC with S = 1 and S = 3/2, which have the property of optical alignment of the spin levels even at room temperature and above. The spin state can be initialized, manipulated and readout by means of optically detected magnetic resonance (ODMR), level anticrossing and cross-relaxation. Recently, we observed the effects of “hole burning” in the ODMR spectra, which made it possible to narrow the ODMR line by approximately an order of magnitude, which substantially increases the possibilities of technological applications of spin centres.
Quantum photonics is an emerging field of photonics where single photons are used for applications in quantum computation, quantum communication, and quantum sensing. One of the key enablers of these new technologies is colour centres. Colour centres are isolated defects in crystals that are able to emit single photons and have spin properties that can be exploited for quantum technologies. These properties include high brightness, low photo-bleaching, and room-temperature optically accessible spins. Wide-bandgap semiconductors such as diamond, silicon carbide and gallium nitride, and 2D materials such as h-BN and TMDs are of particular interest as host materials for colour centres. Numerous light emitters have been discovered and documented in these materials. Colour centres typically occur naturally in semiconductors and are often introduced during the growth process. This random distribution of defects is clearly not desirable for making quantum devices as it makes it difficult to process the materials and introduce structures that interact with these defects such as electrical contacts. The key technology that allows for the precise engineering of colour centres and other quantum defects in materials is ion implantation. Ion implantation utilizes energetic ion beams for the modification of electrical, optical, and magnetic properties of materials. It is a key processing step that has been widely used in the semiconductor industry for doping of semiconductors and for creating buried oxides. Ion implanters that are currently used in industry are designed for uniform wafer-level implantation of relatively large fluences of ions with high beam currents. The new quantum technologies, such as quantum computing, require a major paradigm shift in the way in which ion implantation is performed.
Color centres in diamond represent a very interesting system for realizing single photon emitters, even at room temperature, in particular are attracting an ever-growing interest in quantum optics, quantum information and quantum sensing, due to their appealing photo-physical properties combined with ease of access and manipulation in a solid state system characterized by high transparency and structural stability. Literally hundreds of optically active color centers can be created and controlled in the diamond matrix, to be employed either as bright and stable single-photon sources or individual spin systems with optical readout, with record performances even at room temperature. In concurrence with the remarkable results obtained at the state of the art on the exploitation of the unique properties of the negatively-charged nitrogen-vacancy complex (NV), new and appealing color centers are continuously being discovered and characterized. In the present contribution, the most recent results obtained by a collaboration among the Italian National Institutes of Metrologic Research (INRiM), the University of Torino and the Italian National Institutes of Nuclear Physics (INFN) will be overviewed and critically assessed in their future perspectives.
Silicon carbide (SiC) is a promising platform for scalable quantum technologies owing to its well-established, wafer-scale industrial processing. SiC also hosts a variety of optically active color centres including the nitrogen vacancy defect that has a spin-triplet ground state. However, strong phonon coupling in the infrared range limits photon extraction from these defects. Here, we use nanophotonic structures, specifically micro-pillar and micro-disk resonators, to enhance optical collection and spin-readout. The micro-pillar geometry yields a 4-fold increase in photon collection, accompanied by a 2.4-fold reduction in spectral noise in optically detected magnetic resonance measurements. Consequently, the magnetic field sensitivity is improved by 24%. The large mode volume of the micro-disk supports resonances spanning 1150-1250 nm, enabling broadband coupling to nitrogen vacancy emission lines. Our results demonstrate that fabrication of scalable photonic structures efficiently improves performance of silicon carbide color centers for integrated quantum light generation and sensing.
Realization of quantum memory with a photonic interface in the telecommunication bands in a wafer-scalable platform is a central requirement for long-distance quantum networks. Silicon carbide (SiC) provides a technologically mature host for integrated quantum photonics, yet only a limited number of defects combine spin functionality with telecom emission. Here we report on chlorine-based defects in 4H-SiC as a platform for telecom-band quantum memory. The emission of these defects spans the entire telecommunication range with zero-phonon lines in the O- and C-bands and a Debye-Waller factor of up to 39 %39 \, \%39%. Time-resolved photoluminescence measurements reveal a short excited-state lifetime in the sub-nanosecond range. We demonstrate that these defects are spin-active even at room temperature, exhibiting optically detected magnetic resonances (ODMR) in the sub-GHz frequency range. Using ODMR spectroscopy and Ramsey interferometry, we resolve the hyperfine structure arising from the interaction with 35Cl^{35}\mathrm{Cl}35Cl nuclear spins. The ODMR spectra exhibit complex behaviour in an external magnetic field due to mixing of electron-nuclear spin states, which is well reproduced by our simulations. The spin relaxation and coherence times are in the sub-microsecond range, limited by rapid quenching of the ODMR contrast and attributed to charge-state metastability. The combination of telecom-band emission, coherent spin control and compatibility with wafer-scale fabrication positions Cl-related defects in SiC as a promising platform for chip-scale quantum memories with spin-photon interfaces operating in the fiber-optic telecommunication windows.
Abstract A scanning optical quantum magnetometer with submicron spatial resolution is proposed that is based on the phenomenon of hole burning in the signal of optically detected magnetic resonance (ODMR) on atomic-sized color centers in silicon carbide crystals under conditions of spin level saturation by means of additional high-frequency resonance pumping. An increase in the sensitivity is achieved due to narrowing of the ODMR line and increasing slope of the dependence of signal frequency on the magnetic field.
Abstract Silicon carbide (SiC) is an excellent industrially compatible material, which has been widely used in high power electronic devices. Recently, spin defects in SiC have been found to be a high-quality spin-to-photon interface with long spin coherence time and high spin-selective optical transition. Spin states can be initialized and readout with extremely high fidelity. The infrared and even telecom fluorescence is suited for fiber communication with less scatting loss. The bandwidth of intrinsic zero-phonon-line emission can be manipulated by classical electrical devices. The achieved near lifetime-limited optical linewidths greatly increase the indistinguishability of photon emission and facilitate the connection with other narrowband absorption quantum systems, such as cold atoms, trapped ions, and rare-earth dopants in crystals. Moreover, spin defects coupled with photonic nanocavities have been demonstrated, which can greatly enhance the photon emission in the zero-phonon-line. The realization of controllable electron-nuclear spin entanglement further extends the memory-based quantum applications. In this perspective, we will briefly discuss the most recent development of spin defects in SiC. These results show that spin defects in SiC are desirable quantum platforms for quantum networking applications. We also discuss some of the current challenges and possible future development.