We demonstrate the use of an anodic bonding technique for building a vacuum tight vapor cell for the use of Rydberg spectroscopy of alkali atoms with thin film electrodes on the inside of the cell. The cell is fabricated by simultaneous triple stack glass-to-glass anodic bonding at 300 °C. This glue-free, low temperature sealing technique provides the opportunity to include thin film electric feedthroughs. The pressure broadening is only limited by the vapor pressure of rubidium and the lifetime is at least four months with operating temperatures up to 230 °C.
This paper describes the progress made in developing wafer-scale fabrication process of alkali vapor cells for chip-scale atomic devices such as Coherent Population Trapping (CPT) clocks, optical frequency standards and Rydberg-atom-based sensors. The wafer level fabrication process uses anodic bonding and introduces alkali atoms by chemical reactions of Alkali Chloride with Barium Azide. This method is compatible to make cells with a wide range of buffer gas species and pressures, including evacuated cells. We improve the yield of the cells to above 50%. We will show the residual gas pressures for evacuated cells are mostly consistent with zero within the resolution of the saturation absorption spectroscopy measurement. The temperature coefficients for the CPT spectroscopy are improved with Ar-N2 mixture buffer gas compared with only N2 buffer gas.
We report on the realization and evaluation of micro-fabricated alkali vapor cells using a thin-film indium bonding technique. Optical and double-resonance spectroscopy performed on the cells demonstrates their suitability for atomic clock applications. Long-term measurements show a stable pressure inside the cells and therefore an excellent hermeticity of the bonding over several months. The low bonding process temperature of ≤ 140°C combined with good bond strength makes this method a promising candidate for realizing micro-fabricated alkali cells with anti-relaxation wall-coatings.
Abstract Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the manufacturing of miniature atomic clocks and quantum sensors. However, silicon’s high dielectric constant and conductive losses at millimeter wave frequencies limit its suitability for Rydberg-atom electrometry, which enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. To address this, we present an all-glass wafer-level microfabrication process that eliminates silicon, creating hermetically sealed vapor cells that are stable over long timelines with embedded cesium dispensers. Femtosecond laser machining precisely defines the cell geometry, and laser-activated alkali loading ensures reliable filling. We demonstrate long-term vacuum stability and robust Rydberg excitation through electromagnetically induced transparency measurements. We then use these cells to measure a 34 GHz millimeter wave field resonant with the
58D5/2→60P3/2 58 D 5 / 2 → 60 P 3 / 2 transition using Autler-Townes splitting and observe the expected linear dependence with field strength. This work demonstrates that the all-glass bonding approach offers a highly durable low-loss cell alternative for miniaturized millimeter wave and microwave quantum sensing, with the potential to flexibly incorporate a range of other dielectric and semiconductor materials and integrate with photonic and electronic technologies.
Research of hot atomic vapor systems has a long history. Recently, much-improved technologies, such as lasers, microwaves and digital/analog control systems, have led to exciting progress in this reviving field. Due to its cryogenic-free and vacuum-free deployment potential, room-temperature and quantum-enabled sensing devices using gaseous atoms have become a popular research topic, and engineering such devices has received considerable attention. Proof-of-principle experiments have been performed demonstrating new ideas such as quantum-enhanced motion sensors, next-generation magnetometers, Rydberg enabled microwave sensors, etc. This thesis focuses on my work related to electromagnetic-field sensing using Rydberg atoms in vapor cells, where Rydberg atoms are excited and detected by electromagnetically induced transparency (EIT) spectroscopy. I first investigate the detection of strong magnetic fields (
sim 1~T) in the Paschen-Back regime. The diamagnetic (quadratic) response of the Rydberg levels makes the atoms sensitive to small fluctuations in field strength on a large background. By implementing an isotope-mixed cell, we demonstrate that accurate measurement, within a relative uncertainty of
pm0.12%. Many Rydberg-enabled radio frequency and microwave sensing applications require a capability of zeroing or intentional tuning of small DC electric fields inside the vapor cell. For this purpose, I explore an in-situ DC electric-field sensing and tuning method without using any bulk or thin film electrodes. I find that the photoelectric effect on the vapor cell walls (with invisible, atomic Rb aggregate layers covering the surfaces) can generate tuning fields up to 0.8~V/cm, with an inhomogeneity of about 2%. The spatial distribution of these fields can be directly monitored by quadratic Stark shifts of the Rydberg atoms. This work may inspire new approaches for DC-field control in miniaturized, metal-free atomic vapor-cell devices. Like many other quantum measurements on hot gaseous samples, short interaction time and other technical decoherence processes are the major factors which limit the precision and, in certain cases, the accuracy of the metrological results. In order to study these effects in the context of EIT, I performed an EIT experiment using a
Lambda-type quantum system consisting of the hyperfine ground states and the first excited electronic state of the Rb atoms contained in a buffer-gas-free thermal vapor cell without anti-relaxation coating. Technical line-broadening effects due to inhomogeneity of stray magnetic fields, laser frequency jitter, transverse beam intensity distribution, interaction time distribution, and atom-wall/impurity gas collisions are studied. Experimental results and numerical simulations are compared. These results provide crucial information and quantitative insights for vapor cell sensor design. The development of compact and multi-functional spectroscopy vapor cells is widely considered to be a critical engineering step towards manufacturing field-deployable sensors for real life applications. My R&D efforts towards fabrication of glass spectroscopy cells with integrated, highly-conductive silicon components are presented in the last part of my thesis. I explored various technical challenges and successfully developed a proof-of-principle prototype from scratch. The device allows the application of electric fields inside the cell for particle trapping and for tuning Rydberg transitions. Further, the highly-conductive silicon components enable microwave polarization filtering for microwave sensing applications, plasma-physics studies, etc. Preliminary experimental/technical data and simulations are presented. In summary, in my thesis I report on a comprehensive study of several spectroscopic and field sensing applications of Rydberg and ground-state atoms in vapor cells, as well as forays into novel methods to engineer vapor cells with embedded electrodes.
This paper focuses on standardized fabrications of atomic vapor cells with multipass cells. For this purpose, we build a vacuum system that enables the sealing of the multipass-cavity-assisted cell under vacuum. Alkali atoms are prepared inside a glass holder, and the tip of the holder is broken by controlled collisions under vacuum. Atoms are then transferred to a cell glass body part by heating. Once enough atoms accumulate inside the glass part, buffer and quenching gases are filled into the system, and the glass body part is moved to contact the silicon wafer which is bonded with a Herriott-cavity. Then the cavity part and the glass part are sealed together using the anodic bonding technique. The resulting vapor cells provide enhanced measurement sensitivity and improved device standardization, which allows for seamless replacements of each other in practical applications. The performances of these cells are tested, including a test in a double-resonance alkali-metal atomic magnetometer. A magnetic field sensitivity of 95 fT/Hz1/2 is achieved in a frequency range from 10 to 20 Hz with a multipass cell filled with 400 Torr (1 Torr = 1.33×102 Pa) N2 and natural Rb atoms at 100 ℃. The technology and cells developed in this work are expected to have wide applications in atomic devices, especially in He magnetometers and nuclear-spin atomic co-magnetometers, which have special requirements for cell qualities.