Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

High Power Josephson Parametric Amplifiers with GHz Bandwidth

Ofer Naaman, D.W. Ferguson, Alex Marakov, William F. Koehl, R. J. Epstein, Moe S. Khalil

Published Mar 8, 2018• 1 citation
OpenAlex

Related papers

High dynamic range Josephson parametric amplifiers

Nicolas Roch, Kater W. Murch, Rajamani Vijay

Bulletin of the American Physical Society•Mar 17, 2016•0 citations

High Saturation Power Josephson Parametric Amplifier with GHz Bandwidth

Ofer Naaman, David Ferguson, Alexander Marakov +3 more

We present design and simulation of a Josephson parametric amplifier with bandwidth exceeding 1.6 GHz, and with high saturation power approaching -90 dBm at a gain of 22.8 dB. An improvement by a factor of roughly 50 in bandwidth over the state of the art is achieved by using well-established impedance matching techniques. An improvement by a factor of roughly 100 in saturation power over the state of the art is achieved by implementing the Josephson nonlinear element as an array of rf-SQUIDs with a total of 40 junctions. WRSpice simulations of the circuit are in excellent agreement with the calculated gain and saturation characteristics.

arXiv:1711.07549•IEEE MTT-S International Microwave Symposium digest•Jun 1, 2019•22 citations

Broadband flux-pumped Josephson parametric amplifier with an on-chip coplanar waveguide impedance transformer

Peng Duan, Zhi-Long Jia, Chi Zhang +11 more

Abstract The rapid progress towards scalable quantum processors demands amplifiers with large bandwidths and high saturation powers. For this purpose, we present a broadband flux-pumped Josephson parametric amplifier integrated with an on-chip coplanar waveguide impedance transformer. Our device can be fabricated with simple and straightforward photo-lithography. This device experimentally achieves an operational bandwidth over 600 MHz with a gain above 15 dB, and a high saturation power with quantum-limited noise performance. In addition, the center frequency of this device can be tuned over several hundred megahertz, which in turn broadens the effective operational bandwidth to around 1 GHz.

Applied Physics Express•Mar 18, 2021•31 citations

Broadband Josephson parametric amplifiers: Beyond the standard gain-bandwidth product

Tanay Roy, S. Kundu, Madhavi Chand +7 more

Bulletin of the American Physical Society•Mar 17, 2016•0 citations

A Multi-Channel Josephson Parametric Amplifier

Michael Selvanayagam, Alexander T. Papageorge, Damon S. Russell +6 more

Bulletin of the American Physical Society•Mar 14, 2017•0 citations

Wireless Josephson parametric amplifier above 20 GHz

Z. Hao, J. Cochran, Y.-C. Chang +2 more

Operating superconducting qubits at elevated temperatures offers increased cooling power, thus system scalability, but requires suppression of thermal photons to preserve coherence and readout fidelity. This motivates migration to higher operation frequencies, which demands high-frequency amplification with near-quantum-limited noise characteristics for qubit readout. Here, we report the design and experimental realization of a wireless Josephson parametric amplifier (WJPA) operating above 20 GHz. The wireless design eliminates losses and impedance mismatches that become problematic at high frequencies. The WJPA achieves more than 20 dB of gain across a tunable frequency range of 21–23.5 GHz, with a typical 3 dB bandwidth of 3 MHz. Through Y-factor measurements and a qubit-based photon number calibration, we show that the amplifier exhibits an added noise of approximately two photons.

arXiv:2508.11137•Applied Physics Letters•Jan 5, 2026•7 citations
We present design and simulation of a Josephson parametric amplifier with bandwidth exceeding 1.6 GHz, and with high saturation power approaching -90 dBm at a gain of 22.8 dB. An improvement by a factor of roughly 50 in bandwidth over the state of the art is achieved by using well-established impedance matching techniques. An improvement by a factor of roughly 100 in saturation power over the state of the art is achieved by implementing the Josephson nonlinear element as an array of rf-SQUIDs with a total of 40 junctions. WRSpice simulations of the circuit are in excellent agreement with the calculated gain and saturation characteristics.
Abstract The rapid progress towards scalable quantum processors demands amplifiers with large bandwidths and high saturation powers. For this purpose, we present a broadband flux-pumped Josephson parametric amplifier integrated with an on-chip coplanar waveguide impedance transformer. Our device can be fabricated with simple and straightforward photo-lithography. This device experimentally achieves an operational bandwidth over 600 MHz with a gain above 15 dB, and a high saturation power with quantum-limited noise performance. In addition, the center frequency of this device can be tuned over several hundred megahertz, which in turn broadens the effective operational bandwidth to around 1 GHz.
Operating superconducting qubits at elevated temperatures offers increased cooling power, thus system scalability, but requires suppression of thermal photons to preserve coherence and readout fidelity. This motivates migration to higher operation frequencies, which demands high-frequency amplification with near-quantum-limited noise characteristics for qubit readout. Here, we report the design and experimental realization of a wireless Josephson parametric amplifier (WJPA) operating above 20 GHz. The wireless design eliminates losses and impedance mismatches that become problematic at high frequencies. The WJPA achieves more than 20 dB of gain across a tunable frequency range of 21–23.5 GHz, with a typical 3 dB bandwidth of 3 MHz. Through Y-factor measurements and a qubit-based photon number calibration, we show that the amplifier exhibits an added noise of approximately two photons.