We theoretically propose a circuit of the four-body coupler for superconducting qubits based on Josephson parametric oscillators (JPOs). Our coupler for the four-body interaction has a superconducting loop, similar to a capacitively shunted flux qubit, where an external magnetic flux set to half a flux quantum is threaded. This coupler circuit is a specific setup of the circuit called superconducting nonlinear asymmetric inductive elements (SNAIL) and also is a generalization of the previously proposed one for the four-body interaction of JPOs. We clarify roles of circuit parameters in the four-body interaction and, in particular, show that the four-body coupling constant in our circuit can be significantly increased by tuning capacitance of the coupler or the area ratio of the Josephson junctions of the coupler.
Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below
10−4 over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.