Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics B

Compact atom interferometer using single laser

Sheng‐wey Chiow, Nan Yu

Published May 8, 2018• 17 citations
Publisher
DOI
10.1007/s00340-018-6965-2

Related papers

Versatile Atom Interferometer using a Single Diode Laser

Xiaojing Wu, Fei Zi, Ryan Bilotta +2 more

Bulletin of the American Physical Society•Jun 7, 2017•0 citations

Compact laser system for atom interferometry

Patrick Cheinet, Franck Pereira dos Santos, T. Petelski +5 more

arXiv:physics/0510261•Applied Physics B•May 19, 2006•87 citations

Compact atom interferometer using a single laser

Sheng‐wey Chiow, Nan Yu

A laser system for a light-pulse atom interferometer typically includes a number of laser sources for cooling and for atom optics to meet different frequency detuning requirements at different stages of a measurement sequence. The number of laser units required makes the achievable minimum size and power of the instrument challenging, especially for space applications. We demonstrate a compact cesium atom interferometer operated by only a single laser. This is achieved by dynamically changing the laser output frequency while maintaining spectroscopic reference to an atomic transition. We are able to generate cold atoms and obtain atom interferometer fringes all with the same laser.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2017•1 citation

A compact and low phase noise laser system using phase modulation and a filtering cavity

Ki-Se Lee, Sang-Bum Lee, Sang Eon Park +2 more

A new robust laser system for mobile atom interferometers is reported. Phase modulation of a single diode laser provide two phase-coherent frequencies necessary for the Raman transition in light-pulse atom interferometers. Additional laser frequencies generated by the phase modulation, which would disturb the phase of atom interferometers, is filtered by a Fabry-Perot cavity. The two sidebands of the phase-modulated light is tuned to the adjacent resonances of the cavity and the carrier mode and even-order higher sidebands are filtered. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (-135 dBrad2/Hz at 10 kHz). This technique can be used in all-fiber-based laser systems for future mobile atom interferometers. The laser system has advantage of low phase noise, high mechanical stability, low power consumption and compactness.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jul 1, 2017•0 citations

A simple laser system for atom interferometry

Sébastien Merlet, Laurent Volodimer, M. Lours +1 more

arXiv:1406.5994•Applied Physics B•Jul 1, 2014•50 citations

Compact portable 795nm DFB diode laser system for atom interferometer

Yuan Zhe Zhao, Jun Gao, Jie Guo +2 more

Here, we demonstrate a homemade compact portable 795nm DFB laser system for atom interferometer. The whole laser system including the control unit is integrated in a module with a dimension of 345 mm×275 mm×70 mm . The laser frequency is respect to 87Rb D1 line F=2→F’=2 transition by modulation transfer spectroscopy (MTS) technique. The short-term linewidth is less than 700kHz@1.68ms, and the short-term stability of frequency is less than 157.4 kHz@1.5min (standard deviation). The output power after a single mode polarization maintaining fiber is about 30 mW, and the laser power instability is better than 0.23%@11 h (RMS) and 2.4%@11 h (peak-to-peak value). The polarization extinction ratio (PER) for output fiber is specified to be greater than 25.9 dB, and the mode-hop-free tuning range is greater than15 GHz. The compact laser system has been applied in the state selection process of our atom interferometer and achieves about 90% state preparation efficiency.

International Conference on Optoelectronic and Microelectronic Technology and Application•Dec 4, 2020•1 citation
A laser system for a light-pulse atom interferometer typically includes a number of laser sources for cooling and for atom optics to meet different frequency detuning requirements at different stages of a measurement sequence. The number of laser units required makes the achievable minimum size and power of the instrument challenging, especially for space applications. We demonstrate a compact cesium atom interferometer operated by only a single laser. This is achieved by dynamically changing the laser output frequency while maintaining spectroscopic reference to an atomic transition. We are able to generate cold atoms and obtain atom interferometer fringes all with the same laser.
A new robust laser system for mobile atom interferometers is reported. Phase modulation of a single diode laser provide two phase-coherent frequencies necessary for the Raman transition in light-pulse atom interferometers. Additional laser frequencies generated by the phase modulation, which would disturb the phase of atom interferometers, is filtered by a Fabry-Perot cavity. The two sidebands of the phase-modulated light is tuned to the adjacent resonances of the cavity and the carrier mode and even-order higher sidebands are filtered. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (-135 dBrad2/Hz at 10 kHz). This technique can be used in all-fiber-based laser systems for future mobile atom interferometers. The laser system has advantage of low phase noise, high mechanical stability, low power consumption and compactness.
Here, we demonstrate a homemade compact portable 795nm DFB laser system for atom interferometer. The whole laser system including the control unit is integrated in a module with a dimension of 345 mm×275 mm×70 mm . The laser frequency is respect to 87Rb D1 line F=2→F’=2 transition by modulation transfer spectroscopy (MTS) technique. The short-term linewidth is less than 700kHz@1.68ms, and the short-term stability of frequency is less than 157.4 kHz@1.5min (standard deviation). The output power after a single mode polarization maintaining fiber is about 30 mW, and the laser power instability is better than 0.23%@11 h (RMS) and 2.4%@11 h (peak-to-peak value). The polarization extinction ratio (PER) for output fiber is specified to be greater than 25.9 dB, and the mode-hop-free tuning range is greater than15 GHz. The compact laser system has been applied in the state selection process of our atom interferometer and achieves about 90% state preparation efficiency.