Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)

Performance of a 230 GHz SIS receiver using broadband integrated matching structures

Karl Jacobs

Published Dec 7, 2017• 2 citations
Publisher

Abstract

For low noise performance of SIS junctions as heterodyne mixing elements a common requirement is an coRC of the junction of around 3-4. For R=505), co=27t•230 GHz, and a specific capacitance of 60 fF/µ,m2, this means a junction area of 0.69 ptm2, i.e. submicron area junctions. Junctions of these dimensions are difficult to fabricate. Using arrays of junctions to reduce the effective capacitance results in the necessity of high current densities and requires good junction uniformity. Using an integrated superconducting impedance matching structure, we were able to get good performance at 230 GHz with single junctions as large as 2.5 IA m2 (Nb-A10x-Nb junctions fabricated at KOSMA, University of Cologne). An additional advantage of the large size is the low magnetic field necessary to suppress the Josephson currents. The matching structure is described in a companion paper [1]. It consists of a loaded stub compensating for the junction capacitance and two ',za /4 transformer sections which transform the real part of the resulting impedance. The waveguide mixer uses a backshort and an E-plane tuner in full height waveguide and was optimized together with the RF filter by scale modeling to give a maximum impedance tuning range [2]. A sketch of the test receiver is shown in Fig. 1. The IF HEMT amplifier has a noise temperature of 8K and was developed in house.

DOI
10.1117/12.2298282

Related papers

Performance of a two-junction array SIS-mixer operating around 345 GHz

Cornelia E. Honingh, Gert J. de Lange, M. M. T. M. Dierichs +3 more

The authors have made a detailed study of the gain and noise of a SIS (superconductor-insulator-superconductor) heterodyne receiver at 345 GHz. An array of two Nb-Al/sub 2/O/sub 3/-Nb SIS junctions in series are used as the mixing element. The array is operated in a waveguide mount with a backshort and an E-plane tuner. The best receiver noise temperature achieved is 140 K DSB (double sideband). The embedding impedances were determined by fitting theory to the measured pumped curves. High-quality fits were obtained, providing the first detailed test of the Tucker-theory at frequencies above 300 GHz. The impedances found by this method are in very good agreement with impedances measured in a scale model at 3.3 GHz. From these embedding impedances, the gain and noise of the mixer were calculated over a full bias range using the Tucker theory in the three-port low-IF approximation. The measured dependence of mixer gain and noise on bias voltage, pump power and embedding impedance is in good agreement with theory. However the absolute values show discrepancies that appear to be independent of the bias parameters of the mixer.>

IEEE Transactions on Microwave Theory and Techniques•Apr 1, 1993•14 citations

A 547 GHz SIS receiver employing a submicron Nb junction with an integrated matching circuit

Pascal Febvre, William R. McGrath, P. D. Batelaan +4 more

A heterodyne receiver using an SIS (superconductor-insulator-superconductor) waveguide mixer with two mechanical tuners has been built and characterized over the frequency range of 460 GHz to 630 GHz. This receiver is designed for radioastronomy applications. The mixer uses high-current-density, 0.25- mu m/sup 2/, Nb/AlO/sub x//Nb SIS tunnel junctions with integrated superconductive RF circuits to tune the junction capacitance. A DSB (double sideband) receiver noise temperature as low as 200+or-17 K has been obtained at 540 GHz. In addition, negative differential resistance has been observed in the DC I-V (current-voltage) curve at 487-491 GHz.>

IEEE MTT-S International Microwave Symposium digest•Dec 30, 2002•4 citations

A low noise 230 GHz heterodyne receiver employing 0.25- mu m/sup 2/ area Nb-AlO/sub x/-Nb tunnel junctions

J. Kooi, M. Chan, Tom G. Phillips +2 more

The authors report recent results for a full-height rectangular waveguide mixer with an integrated IF matching network. Two 0.25 mu m/sup 2/ Nb-AlO/sub x/-Nb superconducting-insulating-superconducting (SIS) tunnel junctions with a current density of approximately=8500 A/cm/sup 2/ and omega RC of approximately=2.5 at 230 GHz have been tested. One of these quasiparticle tunnel junctions is currently being used at the Caltech Submillimeter Observatory in Hawaii. Detailed measurement of the receiver noise have been made from 200-290 GHz for both junctions at 4.2 K. The lowest receiver noise temperatures were recorded at 239 GHz, measuring 48 K DSB at 4.2 K and 40 K DSB at 2.1 K. The 230-GHz receiver incorporates a one-octave-wide integrated low-pass filter and matching network which transforms the pumped IF junction impedance to 50 Omega over a wide range of impedances.>

IEEE Transactions on Microwave Theory and Techniques•May 1, 1992•39 citations

Quasi-optical submillimeter-wave SIS mixers with NbN/A1N/NbN tunnel junctions

Yoshinori Uzawa, Zhen Wang, Akira Kawakami

We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.

•Mar 1, 1996•2 citations

Mixer gain calculations of a SIS waveguide mixer using an integrated tuning structure

Karl Jacobs

RF coupling to Superconductor-Isolator-Superconductor (SIS) junctions suffers from their large geometric capacitance (45 to 60 fF/μm 2 for Nb-Al 2 O 3 -Nb junctions). Junction areas smaller than 1 μm 2 would be necessary for submillimeter wavelengths but pose considerable difficulties in fabrication. We show mixer performance calculations for moderately sized junctions using an integrated open circuited microstrip stub to tune out the junction capacitance.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Oct 1, 1991•1 citation

Broadband quasi-optical SIS mixers with large area junctions

G. Pance, Michael J. Wengler

A broadband quasi-optical superconducting tunnel junction (SIS) mixer with integrated tuning elements was designed and tested. We are able to achieve very low noise performance using commercially available niobium integrated circuit (IC) technology. The low critical current density (980 A/cm/sup 2/) and large area (12 /spl mu/m/sup 2/) of the commercial SIS's is compensated by the ability to fabricate accurate integrated tuning structures in the mature niobium IC process available from Hypres, Inc. Noise measurements were made in the frequency range from 70 to 105 GHz. The best uncorrected double sideband receiver noise is 38 K at 77 GHz, with receiver noise temperatures less than 100 K from 75 to 102 GHz.>

IEEE Transactions on Microwave Theory and Techniques•Apr 1, 1994•5 citations
For low noise performance of SIS junctions as heterodyne mixing elements a common requirement is an coRC of the junction of around 3-4. For R=505), co=27t•230 GHz, and a specific capacitance of 60 fF/µ,m2, this means a junction area of 0.69 ptm2, i.e. submicron area junctions. Junctions of these dimensions are difficult to fabricate. Using arrays of junctions to reduce the effective capacitance results in the necessity of high current densities and requires good junction uniformity. Using an integrated superconducting impedance matching structure, we were able to get good performance at 230 GHz with single junctions as large as 2.5 IA m2 (Nb-A10x-Nb junctions fabricated at KOSMA, University of Cologne). An additional advantage of the large size is the low magnetic field necessary to suppress the Josephson currents. The matching structure is described in a companion paper [1]. It consists of a loaded stub compensating for the junction capacitance and two ',za /4 transformer sections which transform the real part of the resulting impedance. The waveguide mixer uses a backshort and an E-plane tuner in full height waveguide and was optimized together with the RF filter by scale modeling to give a maximum impedance tuning range [2]. A sketch of the test receiver is shown in Fig. 1. The IF HEMT amplifier has a noise temperature of 8K and was developed in house.
The authors have made a detailed study of the gain and noise of a SIS (superconductor-insulator-superconductor) heterodyne receiver at 345 GHz. An array of two Nb-Al/sub 2/O/sub 3/-Nb SIS junctions in series are used as the mixing element. The array is operated in a waveguide mount with a backshort and an E-plane tuner. The best receiver noise temperature achieved is 140 K DSB (double sideband). The embedding impedances were determined by fitting theory to the measured pumped curves. High-quality fits were obtained, providing the first detailed test of the Tucker-theory at frequencies above 300 GHz. The impedances found by this method are in very good agreement with impedances measured in a scale model at 3.3 GHz. From these embedding impedances, the gain and noise of the mixer were calculated over a full bias range using the Tucker theory in the three-port low-IF approximation. The measured dependence of mixer gain and noise on bias voltage, pump power and embedding impedance is in good agreement with theory. However the absolute values show discrepancies that appear to be independent of the bias parameters of the mixer.>
A heterodyne receiver using an SIS (superconductor-insulator-superconductor) waveguide mixer with two mechanical tuners has been built and characterized over the frequency range of 460 GHz to 630 GHz. This receiver is designed for radioastronomy applications. The mixer uses high-current-density, 0.25- mu m/sup 2/, Nb/AlO/sub x//Nb SIS tunnel junctions with integrated superconductive RF circuits to tune the junction capacitance. A DSB (double sideband) receiver noise temperature as low as 200+or-17 K has been obtained at 540 GHz. In addition, negative differential resistance has been observed in the DC I-V (current-voltage) curve at 487-491 GHz.>
The authors report recent results for a full-height rectangular waveguide mixer with an integrated IF matching network. Two 0.25 mu m/sup 2/ Nb-AlO/sub x/-Nb superconducting-insulating-superconducting (SIS) tunnel junctions with a current density of approximately=8500 A/cm/sup 2/ and omega RC of approximately=2.5 at 230 GHz have been tested. One of these quasiparticle tunnel junctions is currently being used at the Caltech Submillimeter Observatory in Hawaii. Detailed measurement of the receiver noise have been made from 200-290 GHz for both junctions at 4.2 K. The lowest receiver noise temperatures were recorded at 239 GHz, measuring 48 K DSB at 4.2 K and 40 K DSB at 2.1 K. The 230-GHz receiver incorporates a one-octave-wide integrated low-pass filter and matching network which transforms the pumped IF junction impedance to 50 Omega over a wide range of impedances.>
We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.
A broadband quasi-optical superconducting tunnel junction (SIS) mixer with integrated tuning elements was designed and tested. We are able to achieve very low noise performance using commercially available niobium integrated circuit (IC) technology. The low critical current density (980 A/cm/sup 2/) and large area (12 /spl mu/m/sup 2/) of the commercial SIS's is compensated by the ability to fabricate accurate integrated tuning structures in the mature niobium IC process available from Hypres, Inc. Noise measurements were made in the frequency range from 70 to 105 GHz. The best uncorrected double sideband receiver noise is 38 K at 77 GHz, with receiver noise temperatures less than 100 K from 75 to 102 GHz.>