Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The Japan Society of Applied Physics

Improvement of Operation Speed of LR-Biased Single Flux Quantum Circuits by Employing Dynamic Resetting Mechanism

Koji Sato

Published Feb 6, 2015• 0 citations
OpenAlex

Related papers

Investigation to Speed Up Single-flux-quantum Circuits by Applying Higher Bias Voltage

Tanaka Masamitsu, Akaike Hiroyuki, Fujimaki Akira +4 more

IEICE Technical Report; IEICE Tech. Rep.•Jul 15, 2010•0 citations

Improvement of Operation Speed of LR-Biased Low-Power Single-Flux Quantum Circuits by Introduction of Dynamic Resetting of Bias Currents

Ryuta Tsutsumi, Koji Sato, Yuki Yamanashi +1 more

We propose a new inductive- and resistive- (LR) biased low-power single-flux quantum (SFQ) circuit that has a dynamic resetting mechanism of the bias current. Because the bias current returns to the initial state rapidly by switching of a Josephson junction in the bias circuit after circuit operation, the operating frequency of the LR-biased SFQ circuit can be improved. We simulated a Josephson transmission line (JTL) that employs the proposed biasing scheme and evaluated the bias current recovery time. Circuit simulation results show that the bias current recovery time of the proposed circuit is improved by 10-20% compared to that of the conventional LR-biased JTL. We have designed and measured a 10-stage JTL and an 8-bit concurrent-flow shift register (SR) with the proposed biasing scheme. We have experimentally demonstrated operation of the JTL with the bias margin of ±29.4% at the operating frequency of up to 70.4 GHz and operation of the 8-bit SR up to 12.3 GHz by the on-chip high-speed test.

IEEE Transactions on Applied Superconductivity•Aug 10, 2016•3 citations

A new optimization procedure for single flux quantum circuits

N Mori, A. Akahori, Tomoyuki Sato +3 more

Physica C Superconductivity•Aug 1, 2001•54 citations

High-speed demonstration of low-power 1 k-bit shift-register memories using LR-biasing SFQ circuits

Toshihiro Takahashi, Ryo Numaguchi, Yuki Yamanashi +1 more

We designed a low-power shift-register memory using single-flux-quantum (SFQ) circuits for bit-serial SFQ microprocessors. In order to reduce the static power consumption of the SFQ memories, LR-biasing SFQ circuits were employed, where the resistance network for supplying the bias current is replaced with the inductance network with small resistance. We implemented a low-power 1 k-bit SFQ shift-register memory and confirmed its 30 GHz operation for all addresses. The power consumption was reduced to 26% of the conventional resistively biased SFQ memories.

IEICE Electronics Express•Jan 1, 2016•8 citations

Design and evaluation of single flux quantum circuits using local flux bias

Shunta Asada, Yuki Yamanashi, Nobuyuki Yoshikawa

The Japan Society of Applied Physics•Jan 25, 2019•0 citations

Study of LR-Loading Technique for Low-Power Single Flux Quantum Circuits

Yuki Yamanashi, T. Nishigai, Nobuyuki Yoshikawa

A single-flux-quantum (SFQ) circuit is thought to be very suitable as a peripheral circuit for superconducting quantum bits (qubits), which can manipulate and detect the qubit state at a temperature state similar to qubits. Even though the power consumption of SFQ circuits is extremely small, it is still sufficient to heat the substrate at a temperature below 1 K. We have investigated and demonstrated low-power SFQ circuits for this application, using the LR-loading technique, which can reduce the static power consumption of the SFQ circuits. Simulation results show that the ratio of the switching speed to the time constant of the bias circuit is important for the stable operation of low-power SFQ circuits. The static power consumption of SFQ circuits can be reduced to the same order as the dynamic power consumption through optimization of the circuit parameters. We have designed and tested a low-power SFQ clock generator using the LR-loading technique and confirmed its stable operation at 4.2 K, where the power consumption is reduced by 93% compared with ordinary biased circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•59 citations
We propose a new inductive- and resistive- (LR) biased low-power single-flux quantum (SFQ) circuit that has a dynamic resetting mechanism of the bias current. Because the bias current returns to the initial state rapidly by switching of a Josephson junction in the bias circuit after circuit operation, the operating frequency of the LR-biased SFQ circuit can be improved. We simulated a Josephson transmission line (JTL) that employs the proposed biasing scheme and evaluated the bias current recovery time. Circuit simulation results show that the bias current recovery time of the proposed circuit is improved by 10-20% compared to that of the conventional LR-biased JTL. We have designed and measured a 10-stage JTL and an 8-bit concurrent-flow shift register (SR) with the proposed biasing scheme. We have experimentally demonstrated operation of the JTL with the bias margin of ±29.4% at the operating frequency of up to 70.4 GHz and operation of the 8-bit SR up to 12.3 GHz by the on-chip high-speed test.
We designed a low-power shift-register memory using single-flux-quantum (SFQ) circuits for bit-serial SFQ microprocessors. In order to reduce the static power consumption of the SFQ memories, LR-biasing SFQ circuits were employed, where the resistance network for supplying the bias current is replaced with the inductance network with small resistance. We implemented a low-power 1 k-bit SFQ shift-register memory and confirmed its 30 GHz operation for all addresses. The power consumption was reduced to 26% of the conventional resistively biased SFQ memories.
A single-flux-quantum (SFQ) circuit is thought to be very suitable as a peripheral circuit for superconducting quantum bits (qubits), which can manipulate and detect the qubit state at a temperature state similar to qubits. Even though the power consumption of SFQ circuits is extremely small, it is still sufficient to heat the substrate at a temperature below 1 K. We have investigated and demonstrated low-power SFQ circuits for this application, using the LR-loading technique, which can reduce the static power consumption of the SFQ circuits. Simulation results show that the ratio of the switching speed to the time constant of the bias circuit is important for the stable operation of low-power SFQ circuits. The static power consumption of SFQ circuits can be reduced to the same order as the dynamic power consumption through optimization of the circuit parameters. We have designed and tested a low-power SFQ clock generator using the LR-loading technique and confirmed its stable operation at 4.2 K, where the power consumption is reduced by 93% compared with ordinary biased circuits.