Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP Advances

Low-phase noise and high-power laser for Bragg atom interferometer

Yuan Sheng Cheng, Ke Zhang, Lele Chen, Wenjie Xu, Qin Luo, Min-Kang Zhou, Zhong-Kun Hu

Published Sep 1, 2017• 12 citations
Publisher

Abstract

We present a laser system with low-phase noise and an output power up to 8.8 W at 780 nm for driving Bragg transitions in a 87Rb fountain. An optical phase-locked loop (OPLL) is employed to restrain the phase noise that arises from the spatial separation of the two Bragg beams at low frequencies. The residual phase variance is suppressed by two orders around 400 Hz. A Mach-Zehnder Bragg atom interferometer, based on the four-photon recoil scheme, has been realized using this laser system. This interferometer shows a resolution of 5×10−9g at an integration time of 1200 s for gravity measurements.

DOI
10.1063/1.5001963

Related papers

A phase-modulated laser system of ultra-low phase noise for compact atom interferometers

Ki-Se Lee, Jaewan Kim, Sang-Bum Lee +2 more

A compact and robust laser system is essential for mobile atom interferometers. Phase modulation can provide the two necessary phase-coherent frequencies without sophisticated phase-locking between two different lasers. However, the additional laser frequencies generated can perturb the atom interferometer. In this article, we report on a novel method to produce a single high-power laser beam composed of two phase-coherent sidebands without the perturbing carrier mode. Light from a diode laser is phase-modulated by using a fiber-coupled electro-optic modulator driven at 3.4 GHz and passes through a Fabry-Perot cavity with a 6.8 GHz free spectral range. The cavity filters the carrier mode to leave the two first-order sidebands for the two-photon Raman transition between the two hyperfine ground states of 87 Rb. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (−135 dBrad 2 /Hz at 10 kHz) at frequencies above 10 Hz. This technique can be used in all-fiber-based laser systems for future mobile atom interferometers.

Journal of the Korean Physical Society•Jul 1, 2015•13 citations

A compact and low phase noise laser system using phase modulation and a filtering cavity

Ki-Se Lee, Sang-Bum Lee, Sang Eon Park +2 more

A new robust laser system for mobile atom interferometers is reported. Phase modulation of a single diode laser provide two phase-coherent frequencies necessary for the Raman transition in light-pulse atom interferometers. Additional laser frequencies generated by the phase modulation, which would disturb the phase of atom interferometers, is filtered by a Fabry-Perot cavity. The two sidebands of the phase-modulated light is tuned to the adjacent resonances of the cavity and the carrier mode and even-order higher sidebands are filtered. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (-135 dBrad2/Hz at 10 kHz). This technique can be used in all-fiber-based laser systems for future mobile atom interferometers. The laser system has advantage of low phase noise, high mechanical stability, low power consumption and compactness.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jul 1, 2017•0 citations

Simple and robust architecture of a laser system for atom interferometry

Sumit Sarkar, Raphaël Piccon, Sébastien Merlet +1 more

We report a compact and robust architecture of a versatile laser system that allows the implementation of several advanced atom interferometry techniques, such as Bragg diffraction, Bloch oscillations, or single and double Raman diffraction. A low noise, frequency tunable fiber-laser (λ = ~1560 nm) serves as the seed. A couple of fiber-coupled amplifiers followed by two fibered second-harmonic generators produce a pair of phase-locked, frequency-controllable laser beams at 780 nm. Manipulating frequencies of individual laser beams at λ = 1560 nm before the amplifiers, facilitates achieving a maximum relative detuning of ± 20 MHz, while maintaining a constant output power. We present the scheme to implement Raman spectroscopy using our laser system and discuss its advantages. Finally, the overall performance of the laser setup has been evaluated by realizing interferometers in copropagating Ramsey-Raman and counterpropagating Bragg configuration.

Optics Express•Jan 7, 2022•17 citations

Comparative analysis of phase noise for different configurations of Bragg lattice for an atomic gravimeter with Bose–Einstein condensate

Pranab Dutta, S. Sagar Maurya, Korak Biswas +2 more

We perform a comparative study of the phase noise induced in the lasers used for Bragg diffraction in a Bose–Einstein condensate-based quantum gravimeter where the Bragg beams are generated using two different configurations. In one of the configurations, the Bragg beams that form the moving optical lattice are generated using two different acousto-optic modulators. In the second configuration, the Bragg beams are generated using a single acousto-optic modulator carrying two phase-locked frequencies. The second configuration shows a suppression of the phase noise by a factor of 4.7 times in the frequency band up to 10 kHz, the primary source of noise, which is the background acoustic noise picked up by optical components and the optical table. We report a short-term sensitivity of 1360μGal/Hz and upon integration over 200 s, achieve a resolution of 99.7 μGal for an interferometric duration of 10 ms.

arXiv:2312.00628•AIP Advances•Jan 1, 2024•5 citations

Atom Interferometry with Rb Blue Transitions

Leonardo Salvi, L. Cacciapuoti, Guglielmo Maria Tino +1 more

We demonstrate a novel scheme for Raman-pulse and Bragg-pulse atom interferometry based on the 5S-6P blue transitions of $^{87}\mathrm{Rb}$ that provides an increase by a factor $\ensuremath{\sim}2$ of the interferometer phase due to accelerations with respect to the commonly used infrared transition at 780 nm. A narrow-linewidth laser system generating more than 1 W of light in the 420--422 nm range was developed for this purpose. Used as a cold-atom gravity gradiometer, our Raman interferometer attains a stability to differential acceleration measurements of $1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}\text{ }\text{ }g$ at 1 s and $2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}10}\text{ }\text{ }g$ after 2000 s of integration time. When operated on first-order Bragg transitions, the interferometer shows a stability of $6\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}\text{ }\text{ }g$ at 1 s, averaging to $1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}\text{ }\text{ }g$ after 2000 s of integration time. The instrument sensitivity, currently limited by the noise due to spontaneous emission, can be further improved by increasing the laser power and the detuning from the atomic resonance. The present scheme is attractive for high-precision experiments as, in particular, for the determination of the Newtonian gravitational constant.

arXiv:2212.12248•Physical Review Letters•Sep 5, 2023•10 citations

An optimized optical phase-locked loop with high bandwidth and stability for Raman laser generation

Rui Xu, Fangjun Qin, Zhichao Ding +6 more

Abstract Among the existing techniques for Raman laser preparation, optical phase-locked loops (OPLLs) are widely used in quantum precision measurements due to their high regulation accuracy and low phase noise. Aiming at the problems of limited adjustment range and insufficient stability of the current OPLL, this paper designs an OPLL by optimizing the operating points with a bias voltage. Performance tests show that, the tuning range of the optimized OPLL is 2 GHz to 9 GHz. This wide frequency cover can produce Raman laser for both 87Rb and 85Rb atomic gravimeters. It can also be used to simplify the optical path in experiments to test the equivalence principle. The optimized OPLL has a long-term phase-locking capability. For integration times of 1 s and 1000 s, the relative Allan’s variance is 1.6 × 10−11 and 5.2 × 10−13, respectively.

Physica Scripta•May 8, 2025•1 citation
We present a laser system with low-phase noise and an output power up to 8.8 W at 780 nm for driving Bragg transitions in a 87Rb fountain. An optical phase-locked loop (OPLL) is employed to restrain the phase noise that arises from the spatial separation of the two Bragg beams at low frequencies. The residual phase variance is suppressed by two orders around 400 Hz. A Mach-Zehnder Bragg atom interferometer, based on the four-photon recoil scheme, has been realized using this laser system. This interferometer shows a resolution of 5×10−9g at an integration time of 1200 s for gravity measurements.
A compact and robust laser system is essential for mobile atom interferometers. Phase modulation can provide the two necessary phase-coherent frequencies without sophisticated phase-locking between two different lasers. However, the additional laser frequencies generated can perturb the atom interferometer. In this article, we report on a novel method to produce a single high-power laser beam composed of two phase-coherent sidebands without the perturbing carrier mode. Light from a diode laser is phase-modulated by using a fiber-coupled electro-optic modulator driven at 3.4 GHz and passes through a Fabry-Perot cavity with a 6.8 GHz free spectral range. The cavity filters the carrier mode to leave the two first-order sidebands for the two-photon Raman transition between the two hyperfine ground states of 87 Rb. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (−135 dBrad 2 /Hz at 10 kHz) at frequencies above 10 Hz. This technique can be used in all-fiber-based laser systems for future mobile atom interferometers.
A new robust laser system for mobile atom interferometers is reported. Phase modulation of a single diode laser provide two phase-coherent frequencies necessary for the Raman transition in light-pulse atom interferometers. Additional laser frequencies generated by the phase modulation, which would disturb the phase of atom interferometers, is filtered by a Fabry-Perot cavity. The two sidebands of the phase-modulated light is tuned to the adjacent resonances of the cavity and the carrier mode and even-order higher sidebands are filtered. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (-135 dBrad2/Hz at 10 kHz). This technique can be used in all-fiber-based laser systems for future mobile atom interferometers. The laser system has advantage of low phase noise, high mechanical stability, low power consumption and compactness.
We report a compact and robust architecture of a versatile laser system that allows the implementation of several advanced atom interferometry techniques, such as Bragg diffraction, Bloch oscillations, or single and double Raman diffraction. A low noise, frequency tunable fiber-laser (λ = ~1560 nm) serves as the seed. A couple of fiber-coupled amplifiers followed by two fibered second-harmonic generators produce a pair of phase-locked, frequency-controllable laser beams at 780 nm. Manipulating frequencies of individual laser beams at λ = 1560 nm before the amplifiers, facilitates achieving a maximum relative detuning of ± 20 MHz, while maintaining a constant output power. We present the scheme to implement Raman spectroscopy using our laser system and discuss its advantages. Finally, the overall performance of the laser setup has been evaluated by realizing interferometers in copropagating Ramsey-Raman and counterpropagating Bragg configuration.
We perform a comparative study of the phase noise induced in the lasers used for Bragg diffraction in a Bose–Einstein condensate-based quantum gravimeter where the Bragg beams are generated using two different configurations. In one of the configurations, the Bragg beams that form the moving optical lattice are generated using two different acousto-optic modulators. In the second configuration, the Bragg beams are generated using a single acousto-optic modulator carrying two phase-locked frequencies. The second configuration shows a suppression of the phase noise by a factor of 4.7 times in the frequency band up to 10 kHz, the primary source of noise, which is the background acoustic noise picked up by optical components and the optical table. We report a short-term sensitivity of 1360μGal/Hz and upon integration over 200 s, achieve a resolution of 99.7 μGal for an interferometric duration of 10 ms.
We demonstrate a novel scheme for Raman-pulse and Bragg-pulse atom interferometry based on the 5S-6P blue transitions of 87Rb^{87}\mathrm{Rb}87Rb that provides an increase by a factor $\ensuremath{\sim}2$ of the interferometer phase due to accelerations with respect to the commonly used infrared transition at 780 nm. A narrow-linewidth laser system generating more than 1 W of light in the 420--422 nm range was developed for this purpose. Used as a cold-atom gravity gradiometer, our Raman interferometer attains a stability to differential acceleration measurements of $1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}\text{ }\text{ }g$ at 1 s and $2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}10}\text{ }\text{ }g$ after 2000 s of integration time. When operated on first-order Bragg transitions, the interferometer shows a stability of $6\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}\text{ }\text{ }g$ at 1 s, averaging to $1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}\text{ }\text{ }g$ after 2000 s of integration time. The instrument sensitivity, currently limited by the noise due to spontaneous emission, can be further improved by increasing the laser power and the detuning from the atomic resonance. The present scheme is attractive for high-precision experiments as, in particular, for the determination of the Newtonian gravitational constant.
Abstract Among the existing techniques for Raman laser preparation, optical phase-locked loops (OPLLs) are widely used in quantum precision measurements due to their high regulation accuracy and low phase noise. Aiming at the problems of limited adjustment range and insufficient stability of the current OPLL, this paper designs an OPLL by optimizing the operating points with a bias voltage. Performance tests show that, the tuning range of the optimized OPLL is 2 GHz to 9 GHz. This wide frequency cover can produce Raman laser for both 87Rb and 85Rb atomic gravimeters. It can also be used to simplify the optical path in experiments to test the equivalence principle. The optimized OPLL has a long-term phase-locking capability. For integration times of 1 s and 1000 s, the relative Allan’s variance is 1.6 × 10−11 and 5.2 × 10−13, respectively.