Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.00628 · AIP Advances

Comparative analysis of phase noise for different configurations of Bragg lattice for an atomic gravimeter with Bose–Einstein condensate

Pranab Dutta, S. Sagar Maurya, Korak Biswas, Kushal Patel, Umakant D. Rapol

Published Jan 1, 2024• 5 citations
arXivHTMLPDF

Abstract

We perform a comparative study of the phase noise induced in the lasers used for Bragg diffraction in a Bose–Einstein condensate-based quantum gravimeter where the Bragg beams are generated using two different configurations. In one of the configurations, the Bragg beams that form the moving optical lattice are generated using two different acousto-optic modulators. In the second configuration, the Bragg beams are generated using a single acousto-optic modulator carrying two phase-locked frequencies. The second configuration shows a suppression of the phase noise by a factor of 4.7 times in the frequency band up to 10 kHz, the primary source of noise, which is the background acoustic noise picked up by optical components and the optical table. We report a short-term sensitivity of 1360μGal/Hz and upon integration over 200 s, achieve a resolution of 99.7 μGal for an interferometric duration of 10 ms.

DOI
10.1063/5.0187293

Related papers

Low-phase noise and high-power laser for Bragg atom interferometer

Yuan Sheng Cheng, Ke Zhang, Lele Chen +4 more

We present a laser system with low-phase noise and an output power up to 8.8 W at 780 nm for driving Bragg transitions in a 87Rb fountain. An optical phase-locked loop (OPLL) is employed to restrain the phase noise that arises from the spatial separation of the two Bragg beams at low frequencies. The residual phase variance is suppressed by two orders around 400 Hz. A Mach-Zehnder Bragg atom interferometer, based on the four-photon recoil scheme, has been realized using this laser system. This interferometer shows a resolution of 5×10−9g at an integration time of 1200 s for gravity measurements.

AIP Advances•Sep 1, 2017•12 citations

High-precision phase control of an optical lattice with up to 50 dB noise suppression

Kendall Mehling, Murray Holland, Catie LeDesma

An optical lattice is a periodic light crystal constructed from the standing-wave interference patterns of laser beams. It can be used to store and manipulate quantum degenerate atoms and is an ideal platform for the quantum simulation of many-body physics. A principal feature is that optical lattices are flexible and possess a variety of multidimensional geometries with modifiable band-structure. An even richer landscape emerges when control functions can be applied to the lattice by modulating the position or amplitude with Floquet driving. However, the desire for realizing high-modulation bandwidths while preserving extreme lattice stability has been difficult to achieve. In this paper, we demonstrate an effective solution that consists of overlapping two counterpropagating lattice beams and controlling the phase and intensity of each with independent acousto-optic modulators. Our phase controller mixes sampled light from both lattice beams with a common optical reference. This dual heterodyne locking method allows exquisite determination of the lattice position, while also removing parasitic phase noise accrued as the beams travel along separate paths. We report up to 50dB suppression in lattice phase noise in the 0.1Hz - 1Hz band along with significant suppression spanning more than four decades of frequency. When integrated, the absolute phase diffusion of the lattice position is only 10Å over 10 s. This method permits precise, high-bandwidth modulation (above 50kHz) of the optical lattice intensity and phase. We demonstrate the efficacy of this approach by executing intricate time-varying phase profiles for atom interferometry.

arXiv:2504.13264•Physical Review Applied•Dec 23, 2025•1 citation

Cold-atom gravimetry with a Bose-Einstein condensate

J. E. Debs, P. A. Altin, Thomas H. Barter +6 more

We present a cold-atom gravimeter operating with a sample of Bose-condensed ${}^{87}$Rb atoms. Using a Mach-Zehnder configuration with the two arms separated by a two-photon Bragg transition, we observe interference fringes with a visibility of ($83\ifmmode\pm\else\textpm\fi{}6$)% at $T=3$ ms. We exploit large momentum transfer (LMT) beam splitting to increase the enclosed space-time area of the interferometer using higher-order Bragg transitions and Bloch oscillations. We also compare fringes from condensed and thermal sources and observe a reduced visibility of ($58\ifmmode\pm\else\textpm\fi{}4$)% for the thermal source. We suspect the loss in visibility is caused partly by wave-front aberrations, to which the thermal source is more susceptible due to its larger transverse momentum spread. Finally, we discuss briefly the potential advantages of using a coherent atomic source for LMT, and we present a simple mean-field model to demonstrate that with currently available experimental parameters, interaction-induced dephasing will not limit the sensitivity of inertial measurements using freely falling, coherent atomic sources.

arXiv:1011.5804•Physical Review A•Sep 9, 2011•141 citations

Demonstration of an ultrahigh-sensitivity atom-interferometry absolute gravimeter

Zhong-Kun Hu, Bu-Liang Sun, Xiao‐Chun Duan +5 more

We present an ultrahigh-sensitivity gravimeter based on an ${}^{87}$Rb atom interferometer using stimulated Raman transitions. Compared with our previous work, a two-dimensional magneto-optical trap is added in the new gravimeter to increase the atom number and improve the detection signal-to-noise ratio, and a better optical phase-locked loop system is used to reduce the phase noise of Raman beams. Benefiting from these efforts and the excellent performance of the active vibration isolator, a short-term sensitivity of about 4.2 $\ensuremath{\mu}\text{Gal}/\sqrt{\text{Hz}}$ ($1\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{Gal}=1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}$ $\text{m}/{\text{s}}^{2}$) is reached, which improves the sensitivity by a factor of 2 compared with the former best reported value. By a modulation experiment, we further indicate that the residual vibration noise contribution is about 1.2 $\ensuremath{\mu}\text{Gal}/\sqrt{\text{Hz}}$, which implies a possible improvement over the present absolute gravity measurement level by about one order of magnitude. Moreover, we demonstrate a calibration experiment to directly evaluate the sub-$\ensuremath{\mu}$Gal resolution of our gravimeter.

Physical Review A•Oct 8, 2013•414 citations

Serrodyne Matterwave Optics

Jack Roth, Madeline Bernstein, Andrew Christensen +4 more

Bragg diffraction for atom interferometry conventionally requires two laser frequencies whose difference makes the two-photon transition resonant. We show that this frequency difference can instead be generated by serrodyne modulation, allowing Bragg pulses to be driven with a single-frequency laser. The serrodyne modulation is performed using an acousto-optic modulator driven with a phase-modulated RF drive, and generated kilohertz-scale frequency shifts on top of the AOM carrier frequency. While in general serrodyne modulation generates strong unwanted frequency components, we find conditions so that the Bragg diffraction pulses, and atom interferometers constructed from them, are robust to these imperfections, opening the door to the development of ultra compact, single frequency Bragg diffraction based atom interferometers with serrodyne modulation implemented by a position modulated retroreflection mirror.

arXiv:2607.24511•Jul 27, 2026•0 citations

A compact laser system for a portable atom interferometry gravimeter

Qin Luo, Heng Zhang, Ke Zhang +4 more

A compact laser system for a portable 87Rb atom interferometry gravimeter has been demonstrated in this work. This laser system is based on frequency doubling of a single seed laser at the wavelength of 1560 nm. The frequency of the seed laser is controlled by a digital unit with an analog feedback circuit. By using this frequency control method, the frequency of the laser system can be shifted over 1 GHz. Based on this method, the Raman frequency can be locked on the F = 3 → F′ = 4 transition of 85Rb atoms. Moreover, the Raman sideband and the repumping laser are generated by a phase modulator, and it can generate different laser frequencies to meet the requirements of a typical atom interferometer. Additional sidebands in the Raman beam produced from the phase modulator are optimized and reduced, allowing us to observe atom interference with a free evolution time of 320 ms. The control unit including the laser system has been integrated into a box with a volume of 1.5 m × 0.6 m × 0.6 m, and the weight of which is only 150 kg. Using this compact optical scheme, our atomic gravimeter has achieved a sensitivity of 53 μGal/Hz1/2 and a resolution of better than 1 μGal (1 μGal = 1 × 10−8 m/s2) in an integration time of 3000 s.

Review of Scientific Instruments•Apr 1, 2019•44 citations
We perform a comparative study of the phase noise induced in the lasers used for Bragg diffraction in a Bose–Einstein condensate-based quantum gravimeter where the Bragg beams are generated using two different configurations. In one of the configurations, the Bragg beams that form the moving optical lattice are generated using two different acousto-optic modulators. In the second configuration, the Bragg beams are generated using a single acousto-optic modulator carrying two phase-locked frequencies. The second configuration shows a suppression of the phase noise by a factor of 4.7 times in the frequency band up to 10 kHz, the primary source of noise, which is the background acoustic noise picked up by optical components and the optical table. We report a short-term sensitivity of 1360μGal/Hz and upon integration over 200 s, achieve a resolution of 99.7 μGal for an interferometric duration of 10 ms.
We present a laser system with low-phase noise and an output power up to 8.8 W at 780 nm for driving Bragg transitions in a 87Rb fountain. An optical phase-locked loop (OPLL) is employed to restrain the phase noise that arises from the spatial separation of the two Bragg beams at low frequencies. The residual phase variance is suppressed by two orders around 400 Hz. A Mach-Zehnder Bragg atom interferometer, based on the four-photon recoil scheme, has been realized using this laser system. This interferometer shows a resolution of 5×10−9g at an integration time of 1200 s for gravity measurements.
An optical lattice is a periodic light crystal constructed from the standing-wave interference patterns of laser beams. It can be used to store and manipulate quantum degenerate atoms and is an ideal platform for the quantum simulation of many-body physics. A principal feature is that optical lattices are flexible and possess a variety of multidimensional geometries with modifiable band-structure. An even richer landscape emerges when control functions can be applied to the lattice by modulating the position or amplitude with Floquet driving. However, the desire for realizing high-modulation bandwidths while preserving extreme lattice stability has been difficult to achieve. In this paper, we demonstrate an effective solution that consists of overlapping two counterpropagating lattice beams and controlling the phase and intensity of each with independent acousto-optic modulators. Our phase controller mixes sampled light from both lattice beams with a common optical reference. This dual heterodyne locking method allows exquisite determination of the lattice position, while also removing parasitic phase noise accrued as the beams travel along separate paths. We report up to 50dB suppression in lattice phase noise in the 0.1Hz - 1Hz band along with significant suppression spanning more than four decades of frequency. When integrated, the absolute phase diffusion of the lattice position is only 10Å over 10 s. This method permits precise, high-bandwidth modulation (above 50kHz) of the optical lattice intensity and phase. We demonstrate the efficacy of this approach by executing intricate time-varying phase profiles for atom interferometry.
We present a cold-atom gravimeter operating with a sample of Bose-condensed 87{}^{87}87Rb atoms. Using a Mach-Zehnder configuration with the two arms separated by a two-photon Bragg transition, we observe interference fringes with a visibility of ($83\ifmmode\pm\else\textpm\fi{}6$)% at T=3T=3T=3 ms. We exploit large momentum transfer (LMT) beam splitting to increase the enclosed space-time area of the interferometer using higher-order Bragg transitions and Bloch oscillations. We also compare fringes from condensed and thermal sources and observe a reduced visibility of ($58\ifmmode\pm\else\textpm\fi{}4$)% for the thermal source. We suspect the loss in visibility is caused partly by wave-front aberrations, to which the thermal source is more susceptible due to its larger transverse momentum spread. Finally, we discuss briefly the potential advantages of using a coherent atomic source for LMT, and we present a simple mean-field model to demonstrate that with currently available experimental parameters, interaction-induced dephasing will not limit the sensitivity of inertial measurements using freely falling, coherent atomic sources.
We present an ultrahigh-sensitivity gravimeter based on an 87{}^{87}87Rb atom interferometer using stimulated Raman transitions. Compared with our previous work, a two-dimensional magneto-optical trap is added in the new gravimeter to increase the atom number and improve the detection signal-to-noise ratio, and a better optical phase-locked loop system is used to reduce the phase noise of Raman beams. Benefiting from these efforts and the excellent performance of the active vibration isolator, a short-term sensitivity of about 4.2 $\ensuremath{\mu}\text{Gal}/\sqrt{\text{Hz}}$ ($1\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{Gal}=1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}$ m/s2\text{m}/{\text{s}}^{2}m/s2) is reached, which improves the sensitivity by a factor of 2 compared with the former best reported value. By a modulation experiment, we further indicate that the residual vibration noise contribution is about 1.2 $\ensuremath{\mu}\text{Gal}/\sqrt{\text{Hz}}$, which implies a possible improvement over the present absolute gravity measurement level by about one order of magnitude. Moreover, we demonstrate a calibration experiment to directly evaluate the sub-$\ensuremath{\mu}$Gal resolution of our gravimeter.
Bragg diffraction for atom interferometry conventionally requires two laser frequencies whose difference makes the two-photon transition resonant. We show that this frequency difference can instead be generated by serrodyne modulation, allowing Bragg pulses to be driven with a single-frequency laser. The serrodyne modulation is performed using an acousto-optic modulator driven with a phase-modulated RF drive, and generated kilohertz-scale frequency shifts on top of the AOM carrier frequency. While in general serrodyne modulation generates strong unwanted frequency components, we find conditions so that the Bragg diffraction pulses, and atom interferometers constructed from them, are robust to these imperfections, opening the door to the development of ultra compact, single frequency Bragg diffraction based atom interferometers with serrodyne modulation implemented by a position modulated retroreflection mirror.
A compact laser system for a portable 87Rb atom interferometry gravimeter has been demonstrated in this work. This laser system is based on frequency doubling of a single seed laser at the wavelength of 1560 nm. The frequency of the seed laser is controlled by a digital unit with an analog feedback circuit. By using this frequency control method, the frequency of the laser system can be shifted over 1 GHz. Based on this method, the Raman frequency can be locked on the F = 3 → F′ = 4 transition of 85Rb atoms. Moreover, the Raman sideband and the repumping laser are generated by a phase modulator, and it can generate different laser frequencies to meet the requirements of a typical atom interferometer. Additional sidebands in the Raman beam produced from the phase modulator are optimized and reduced, allowing us to observe atom interference with a free evolution time of 320 ms. The control unit including the laser system has been integrated into a box with a volume of 1.5 m × 0.6 m × 0.6 m, and the weight of which is only 150 kg. Using this compact optical scheme, our atomic gravimeter has achieved a sensitivity of 53 μGal/Hz1/2 and a resolution of better than 1 μGal (1 μGal = 1 × 10−8 m/s2) in an integration time of 3000 s.