Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The photo-Kerr effect: a new optical nonlinearity and its use for cavity self-stabilization

Joanna A. Zielińska, Morgan W. Mitchell

Published Jul 28, 2017• 1 citation
OpenAlex

Abstract

We describe a previously unreported optical nonlinearity and demonstrate its application in self-stabilization of an cavity-resonated optical frequency converter. The new effect appears as an optical Kerr nonlinearity whose strength reflects the intra-cavity pump power over long time-scales, even though the Kerr effect it produces is fast. We find good agreement between a simple model of the new nonlinearity and observed nonlinear behavior. We show that this effect induces self-stabilization of the frequency converter, which remains in resonance despite pump frequency changes of multiple free spectral ranges.

Related papers

Self-tuning optical resonator

Joanna A. Zielińska, Morgan W. Mitchell

We demonstrate a nonlinear optical resonator that tunes itself onto resonance with an input beam. In a monolithic Fabry-Perot cavity implemented in rubidium-doped periodically poled potassium titanyl phosphate, an intensity-dependent refractive index produces line pulling by multiple free-spectral ranges (FSRs). In this condition, the cavity passively maintains optical resonance in the face of FSR-scale excursions of the drive laser frequency: when one resonant operating point becomes unstable, the resonator rapidly transitions to another resonant operating point. We demonstrate stable second-harmonic generation with no active feedback to the laser or cavity. The self-tuning effect appears to be supported by a very strong, previously unreported optical nonlinearity.

arXiv:1707.09085•Optics Letters•Dec 14, 2017•26 citations

Influence of Kerr Effect on Second-Order Nonlinearity Induced Transparency

Zhiqiang Zhang, Y. H. Zhou

We theoretically study the effect of Kerr effect on the second-order nonlinearity induced transparency in a double-resonant optical cavity system. We show that in the presence of the Kerr effect, as the strength of the Kerr effect increases, the absorption curve exhibits an asymmetric-symmetric-asymmetric transition, and the zero absorption point shifts with the increase of the Kerr effect. Furthermore, by changing the strength of the Kerr effect, we can control the width of the transparent window, and the position of the zero-absorption point and meanwhile change the left and right width of the absorption peak. The asymmetry absorption curve can be employed to improve the quality factor of the cavity when the frequency detuning is tuned to be around the right peak. The simple dependence of the zero-absorption point on the strength of Kerr effect suggests that the strength of Kerr effect can be measured by measuring the position of the zero-absorption point in a possible application.

Wuhan University Journal of Natural Sciences•Feb 1, 2024•0 citations

Bistability and instability of three-level atoms inside an optical cavity

Hai Wang, David J. Goorskey, Min Xiao

Optical bistability and dynamic instability are experimentally observed and studied in a system consisting of three-level $\ensuremath{\Lambda}$-type rubidium atoms in an optical ring cavity. The bistable behavior and self-pulsing frequency are experimentally manipulated by changing the controlling and cavity field parameters (power and frequency). These nonlinear effects are influenced by the enhanced Kerr nonlinearity due to atomic coherence in such a system.

Physical Review A•Dec 11, 2001•108 citations

Light-shift-induced photonic nonlinearities

Fernando G. S. L. Brandão, Michael J. Hartmann, Martin Bodo Plenio

We propose a new method to produce self- and cross-Kerr photonic nonlinearities, using light-induced Stark shifts due to the interaction of a cavity mode with atoms. The proposed experimental set-up is simpler than in previous approaches, while the strength of the nonlinearity obtained with a single atom is the same as in the setting based on electromagnetically induced transparency. Furthermore our scheme can be applied to engineer effective photonic nonlinear interactions whose strength increases with the number of atoms coupled to the cavity mode, leading to photon–photon interactions several orders of magnitude larger than previously considered possible.

arXiv:0705.2398•New Journal of Physics•Apr 10, 2008•31 citations

Self-sustained optomechanical state destruction triggered by the Kerr nonlinearity

A. Delattre, Ilya Golokolenov, Richard Pedurand +3 more

Cavity optomechanics implements a unique platform where moving objects can be probed by quantum fields, either laser light or microwave signals. With a pump tone driving at a frequency above the cavity resonance, self-sustained oscillations can be triggered at large injected powers. These limit-cycle dynamics are particularly rich, presenting hysteretic behaviors, broad comb signals, and especially large motion amplitudes. All of these features can be exploited for both fundamental quantum research and engineering. Here we present low-temperature microwave experiments performed on a high- Q cavity resonance capacitively coupled to the flexure of a beam resonator. We study the limit-cycle dynamics parameter space as a function of pump parameters (detuning, power). Unexpectedly, we find that in a region of this parameter space the microwave resonance is irremediably destroyed: Only a dramatic power reset can restore the dynamics to its original state. The phenomenon can be understood as an optical instability linked to the Kerr nonlinearity of the cavity. A theory supporting this claim is presented, reproducing almost quantitatively the measurement. This remarkable feature might be further optimized and represents a new resource for quantum microwave circuits. Published by the American Physical Society 2024

arXiv:2403.03509•Physical Review Research•Oct 15, 2024•2 citations

Suppressing Cavity Frequency Noise Using a Kerr Nonlinearity

J. P. van Soest, S. Meilof, G. L. Bhai +3 more

Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the $1/f$ noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.

quant-pharXiv:2608.03440•Aug 5, 2026•0 citations
We describe a previously unreported optical nonlinearity and demonstrate its application in self-stabilization of an cavity-resonated optical frequency converter. The new effect appears as an optical Kerr nonlinearity whose strength reflects the intra-cavity pump power over long time-scales, even though the Kerr effect it produces is fast. We find good agreement between a simple model of the new nonlinearity and observed nonlinear behavior. We show that this effect induces self-stabilization of the frequency converter, which remains in resonance despite pump frequency changes of multiple free spectral ranges.
We demonstrate a nonlinear optical resonator that tunes itself onto resonance with an input beam. In a monolithic Fabry-Perot cavity implemented in rubidium-doped periodically poled potassium titanyl phosphate, an intensity-dependent refractive index produces line pulling by multiple free-spectral ranges (FSRs). In this condition, the cavity passively maintains optical resonance in the face of FSR-scale excursions of the drive laser frequency: when one resonant operating point becomes unstable, the resonator rapidly transitions to another resonant operating point. We demonstrate stable second-harmonic generation with no active feedback to the laser or cavity. The self-tuning effect appears to be supported by a very strong, previously unreported optical nonlinearity.
We theoretically study the effect of Kerr effect on the second-order nonlinearity induced transparency in a double-resonant optical cavity system. We show that in the presence of the Kerr effect, as the strength of the Kerr effect increases, the absorption curve exhibits an asymmetric-symmetric-asymmetric transition, and the zero absorption point shifts with the increase of the Kerr effect. Furthermore, by changing the strength of the Kerr effect, we can control the width of the transparent window, and the position of the zero-absorption point and meanwhile change the left and right width of the absorption peak. The asymmetry absorption curve can be employed to improve the quality factor of the cavity when the frequency detuning is tuned to be around the right peak. The simple dependence of the zero-absorption point on the strength of Kerr effect suggests that the strength of Kerr effect can be measured by measuring the position of the zero-absorption point in a possible application.
We propose a new method to produce self- and cross-Kerr photonic nonlinearities, using light-induced Stark shifts due to the interaction of a cavity mode with atoms. The proposed experimental set-up is simpler than in previous approaches, while the strength of the nonlinearity obtained with a single atom is the same as in the setting based on electromagnetically induced transparency. Furthermore our scheme can be applied to engineer effective photonic nonlinear interactions whose strength increases with the number of atoms coupled to the cavity mode, leading to photon–photon interactions several orders of magnitude larger than previously considered possible.
Cavity optomechanics implements a unique platform where moving objects can be probed by quantum fields, either laser light or microwave signals. With a pump tone driving at a frequency above the cavity resonance, self-sustained oscillations can be triggered at large injected powers. These limit-cycle dynamics are particularly rich, presenting hysteretic behaviors, broad comb signals, and especially large motion amplitudes. All of these features can be exploited for both fundamental quantum research and engineering. Here we present low-temperature microwave experiments performed on a high- Q cavity resonance capacitively coupled to the flexure of a beam resonator. We study the limit-cycle dynamics parameter space as a function of pump parameters (detuning, power). Unexpectedly, we find that in a region of this parameter space the microwave resonance is irremediably destroyed: Only a dramatic power reset can restore the dynamics to its original state. The phenomenon can be understood as an optical instability linked to the Kerr nonlinearity of the cavity. A theory supporting this claim is presented, reproducing almost quantitatively the measurement. This remarkable feature might be further optimized and represents a new resource for quantum microwave circuits. Published by the American Physical Society 2024
Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the 1/f1/f1/f noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.