Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.03440

Suppressing Cavity Frequency Noise Using a Kerr Nonlinearity

J. P. van Soest, S. Meilof, G. L. Bhai, M. Villiers, C. A. Potts, G. A. Steele

quant-phSubmitted Aug 4, 2026• Announced Aug 5, 2026• 0 citations
arXivHTMLPDF

Abstract

Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the $1/f$ noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.

Related papers

Sideband injection locking of microwave frequency combs in a superconducting optomechanical circuit

Jinhoon Jeong, Younghun Ryu, Hyojae Jung +1 more

Superconducting optomechanical circuits enable frequency mixing of optical and mechanical modes, facilitating the generation of microwave frequency combs. However, such optomechanical combs suffer from frequency fluctuations, requiring their stabilization for applications in precision sensing and signal processing. Here, we investigate the sideband injection locking of microwave frequency combs in a niobium-based superconducting optomechanical circuit. By strongly driving the device with a blue-detuned pump to induce parametric instability and introducing an additional tone near individual comb peaks, we study how the locking range varies with the power, the frequency position, and the sweep direction of the injection tone. The locking responses show interesting features such as injection hysteresis, which cannot be explained by existing models. Numerical simulations of the classical optomechanical equations implementing a cubic mechanical nonlinearity show that the nonlinearity contributes to broadening the locking range. We also characterize the Allan deviations and phase noise of the injection-locked combs for different injection frequencies, demonstrating enhanced stability performance. Our results lay the foundation for the utilization of optomechanical combs for applications in nanomechanical sensing and cryogenic microwave pulse generation.

Microsystems & Nanoengineering•Nov 24, 2025•2 citations

Multitone Microwave Frequency Locking to a Noisy Cavity via Real-Time Feedback

Jean-Paul van Soest, C. A. Potts, Sarwan Peiter +2 more

Microwave cavities are commonly used in many experiments, including optomechanics, magnetic field sensing, magnomechanics, and circuit quantum electrodynamics. Noise, such as variations in the magnetic field or mechanical vibrations, can cause fluctuations of the natural frequency of the cavity, creating challenges in operating them in experiments. To overcome these challenges, we demonstrate a dynamic feedback system implemented by the locking of a microwave drive to the noisy cavity. A homodyne-interferometer scheme monitors the cavity resonance fluctuations due to low-frequency noise, which is mitigated by frequency modulating the microwave generator. The feedback has a bandwidth of 400 Hz, with a reduction of cavity fluctuations by $85\mathrm{%}$ integrating up to a bandwidth of 2 kHz. Moreover, the cavity resonance frequency fluctuations are reduced by $73\mathrm{%}$. This scheme can be scaled to enable multitone experiments locked to the same feedback signal. As a demonstration, we apply the feedback to an optomechanical experiment and implement a cavity-locked multitone mechanical measurement. As low-frequency cavity frequency noise can be a limiting factor in many experiments, the multitone microwave locking technique presented here is expected to be relevant for a wide range of microwave-cavity experiments.

arXiv:2304.06296•Physical Review Applied•Sep 6, 2023•0 citations

Feedback Stabilization of the Resonant Frequency in a Tunable Microwave Cavity with Single-Photon Occupancy

S. Kanhirathingal, B. Thyagarajan, Benjamin L. Brock +5 more

We successfully demonstrate low-frequency noise suppression in the resonant-frequency fluctuations of a cavity-embedded Cooper-pair transistor (cCPT) driven at single-photon occupancy. In particular, we report a reduction in the resonant-frequency fluctuations caused by the internal charge noise over a bandwidth of approximately $1.4\phantom{\rule{0.2em}{0ex}}\text{kHz}$ when the cavity is driven at an average photon number $n=10$ and a bandwidth of 11 Hz for an average $n=1$. The gate-dependent tunability of the cCPT allows us to implement a feedback scheme derived from the Pound-Drever-Hall locking technique. This reduces fluctuations due to intrinsic charge noise, which otherwise interfere with the operation of the cCPT as a near quantum-limited electrometer. Our technique can be generalized to achieve frequency stabilization in tunable microwave resonators that play a vital role in today's quantum computing architectures, thereby moderating the limitations in detection caused by the intrinsic $1/f$ noise on such circuit devices. The work discusses the various aspects relating to the operation of a fully functional feedback loop down to the single-photon level.

arXiv:2202.04227•Physical Review Applied•Dec 13, 2022•3 citations

Parametric resonance in tunable superconducting cavities

Waltraut Wustmann, Vitaly S. Shumeiko

We develop a theory of parametric resonance in tunable superconducting cavities. The nonlinearity introduced by the superconducting quantum interference device (SQUID) attached to the cavity and damping due to connection of the cavity to a transmission line are taken into consideration. We study in detail the nonlinear classical dynamics of the cavity field below and above the parametric threshold for the degenerate parametric resonance, featuring regimes of multistability and parametric radiation. We investigate the phase-sensitive amplification of external signals on resonance, as well as amplification of detuned signals, and relate the amplifier performance to that of linear parametric amplifiers. We also discuss applications of the device for dispersive qubit readout. Beyond the classical response of the cavity, we investigate small quantum fluctuations around the amplified classical signals. We evaluate the noise power spectrum both for the internal field in the cavity and the output field. Other quantum-statistical properties of the noise are addressed such as squeezing spectra, second-order coherence, and two-mode entanglement.

arXiv:1302.3484•Physical Review B•May 1, 2013•123 citations

Self-sustained optomechanical state destruction triggered by the Kerr nonlinearity

A. Delattre, Ilya Golokolenov, Richard Pedurand +3 more

Cavity optomechanics implements a unique platform where moving objects can be probed by quantum fields, either laser light or microwave signals. With a pump tone driving at a frequency above the cavity resonance, self-sustained oscillations can be triggered at large injected powers. These limit-cycle dynamics are particularly rich, presenting hysteretic behaviors, broad comb signals, and especially large motion amplitudes. All of these features can be exploited for both fundamental quantum research and engineering. Here we present low-temperature microwave experiments performed on a high- Q cavity resonance capacitively coupled to the flexure of a beam resonator. We study the limit-cycle dynamics parameter space as a function of pump parameters (detuning, power). Unexpectedly, we find that in a region of this parameter space the microwave resonance is irremediably destroyed: Only a dramatic power reset can restore the dynamics to its original state. The phenomenon can be understood as an optical instability linked to the Kerr nonlinearity of the cavity. A theory supporting this claim is presented, reproducing almost quantitatively the measurement. This remarkable feature might be further optimized and represents a new resource for quantum microwave circuits. Published by the American Physical Society 2024

arXiv:2403.03509•Physical Review Research•Oct 15, 2024•2 citations

Superconducting Cavity Electromechanics: The Realization of an Acoustic Frequency Comb at Microwave Frequencies

Xu Han, Chang‐Ling Zou, Wei Fu +3 more

We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.

arXiv:2208.07160•Physical Review Letters•Aug 31, 2022•31 citations
Resonance-frequency fluctuations can limit the sensitivity and stability of superconducting microwave cavities used for qubit readout, optomechanical displacement sensing, and magnetic flux detection. Here, we demonstrate the suppression of resonance-frequency fluctuations by locking a noisy nonlinear superconducting microwave cavity to a strong pump tone. The Kerr nonlinearity of this system, whereby the resonance frequency depends on the intracavity field amplitude, gives rise to an intrinsic feedback mechanism that enables passive stabilization without active external feedback. Using two-tone spectroscopy, we experimentally characterize the intrinsic nonlinear feedback mechanism and investigate its temporal stability through Allan deviation analysis. The frequency fluctuations of the locked cavity mode are reduced by nearly two orders of magnitude, reaching the 1/f1/f1/f noise floor, without continuous frequency tracking or active control. Kerr locking provides a general approach for self-stabilizing nonlinear microwave resonators by suppressing low-frequency cavity noise while preserving sensitivity to signals outside the locking bandwidth. This approach may benefit a broad range of systems, including SQUID-based resonators, optomechanical devices, and parametric amplifiers.
Superconducting optomechanical circuits enable frequency mixing of optical and mechanical modes, facilitating the generation of microwave frequency combs. However, such optomechanical combs suffer from frequency fluctuations, requiring their stabilization for applications in precision sensing and signal processing. Here, we investigate the sideband injection locking of microwave frequency combs in a niobium-based superconducting optomechanical circuit. By strongly driving the device with a blue-detuned pump to induce parametric instability and introducing an additional tone near individual comb peaks, we study how the locking range varies with the power, the frequency position, and the sweep direction of the injection tone. The locking responses show interesting features such as injection hysteresis, which cannot be explained by existing models. Numerical simulations of the classical optomechanical equations implementing a cubic mechanical nonlinearity show that the nonlinearity contributes to broadening the locking range. We also characterize the Allan deviations and phase noise of the injection-locked combs for different injection frequencies, demonstrating enhanced stability performance. Our results lay the foundation for the utilization of optomechanical combs for applications in nanomechanical sensing and cryogenic microwave pulse generation.
Microwave cavities are commonly used in many experiments, including optomechanics, magnetic field sensing, magnomechanics, and circuit quantum electrodynamics. Noise, such as variations in the magnetic field or mechanical vibrations, can cause fluctuations of the natural frequency of the cavity, creating challenges in operating them in experiments. To overcome these challenges, we demonstrate a dynamic feedback system implemented by the locking of a microwave drive to the noisy cavity. A homodyne-interferometer scheme monitors the cavity resonance fluctuations due to low-frequency noise, which is mitigated by frequency modulating the microwave generator. The feedback has a bandwidth of 400 Hz, with a reduction of cavity fluctuations by $85\mathrm{%}$ integrating up to a bandwidth of 2 kHz. Moreover, the cavity resonance frequency fluctuations are reduced by $73\mathrm{%}$. This scheme can be scaled to enable multitone experiments locked to the same feedback signal. As a demonstration, we apply the feedback to an optomechanical experiment and implement a cavity-locked multitone mechanical measurement. As low-frequency cavity frequency noise can be a limiting factor in many experiments, the multitone microwave locking technique presented here is expected to be relevant for a wide range of microwave-cavity experiments.
We successfully demonstrate low-frequency noise suppression in the resonant-frequency fluctuations of a cavity-embedded Cooper-pair transistor (cCPT) driven at single-photon occupancy. In particular, we report a reduction in the resonant-frequency fluctuations caused by the internal charge noise over a bandwidth of approximately 1.4kHz1.4\phantom{\rule{0.2em}{0ex}}\text{kHz}1.4kHz when the cavity is driven at an average photon number n=10n=10n=10 and a bandwidth of 11 Hz for an average n=1n=1n=1. The gate-dependent tunability of the cCPT allows us to implement a feedback scheme derived from the Pound-Drever-Hall locking technique. This reduces fluctuations due to intrinsic charge noise, which otherwise interfere with the operation of the cCPT as a near quantum-limited electrometer. Our technique can be generalized to achieve frequency stabilization in tunable microwave resonators that play a vital role in today's quantum computing architectures, thereby moderating the limitations in detection caused by the intrinsic 1/f1/f1/f noise on such circuit devices. The work discusses the various aspects relating to the operation of a fully functional feedback loop down to the single-photon level.
We develop a theory of parametric resonance in tunable superconducting cavities. The nonlinearity introduced by the superconducting quantum interference device (SQUID) attached to the cavity and damping due to connection of the cavity to a transmission line are taken into consideration. We study in detail the nonlinear classical dynamics of the cavity field below and above the parametric threshold for the degenerate parametric resonance, featuring regimes of multistability and parametric radiation. We investigate the phase-sensitive amplification of external signals on resonance, as well as amplification of detuned signals, and relate the amplifier performance to that of linear parametric amplifiers. We also discuss applications of the device for dispersive qubit readout. Beyond the classical response of the cavity, we investigate small quantum fluctuations around the amplified classical signals. We evaluate the noise power spectrum both for the internal field in the cavity and the output field. Other quantum-statistical properties of the noise are addressed such as squeezing spectra, second-order coherence, and two-mode entanglement.
Cavity optomechanics implements a unique platform where moving objects can be probed by quantum fields, either laser light or microwave signals. With a pump tone driving at a frequency above the cavity resonance, self-sustained oscillations can be triggered at large injected powers. These limit-cycle dynamics are particularly rich, presenting hysteretic behaviors, broad comb signals, and especially large motion amplitudes. All of these features can be exploited for both fundamental quantum research and engineering. Here we present low-temperature microwave experiments performed on a high- Q cavity resonance capacitively coupled to the flexure of a beam resonator. We study the limit-cycle dynamics parameter space as a function of pump parameters (detuning, power). Unexpectedly, we find that in a region of this parameter space the microwave resonance is irremediably destroyed: Only a dramatic power reset can restore the dynamics to its original state. The phenomenon can be understood as an optical instability linked to the Kerr nonlinearity of the cavity. A theory supporting this claim is presented, reproducing almost quantitatively the measurement. This remarkable feature might be further optimized and represents a new resource for quantum microwave circuits. Published by the American Physical Society 2024
We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.