Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Arrays of high-temperature superconductor Josephson junctions for quantum voltage noise source

Alexander M. Klushin, Igor Gordiychuk, Samuel P. Benz

Published Jan 1, 2005• 0 citations
OpenAlex

Related papers

Millimeter-wavelength radiation from arrays of discrete high-temperature superconductor Josephson junctions

Fangfang Song, M. Levitchev, Vadim A. Markelov +3 more

Josephson junction arrays could be competitive candidates for radiation sources in the frequency range from 0.5 to 1.5 THz. This is the range where compact solid-state continuous wave sources are most lacking. We investigated the millimeter-wave radiation from arrays of high-temperature superconductor bicrystal Josephson junctions embedded in a quasi-optical resonator. The novel approach of utilizing the intrinsic resonance modes of the substrate to improve the impedance coupling between the series array of discrete Josephson junctions and the quasi-optical resonator was investigated by experiments and electromagnetic field simulations. Radiation from the arrays containing up to 536 junctions was detected at about 80 GHz and liquid nitrogen temperature using a low-noise receiver. The detected maximum radiation power of the arrays was about 50 pW and the peak voltage agreed exactly with the Josephson current–voltage relation.

Superconductor Science and Technology•Feb 22, 2010•6 citations

Noise In Superconducting Josephson Junctions

Jørn Bindslev Hansen

Springer eBooks•Jan 1, 1991•5 citations

DC voltage calibrator based on an array of high-temperature superconductor josephson junctions

Alexander M. Klushin, A.V. Komkov, V.D. Gelikonova +2 more

We have developed and investigated the main parts of a voltage calibrator with an output voltage up to 10 V. The calibrator is based on a quantum DC voltage which is generated by an array of high-temperature superconductor Josephson junctions. The described concept and the demonstrated parameters of the main parts of the instrument show, that a combined uncertainty of the output voltage of a few parts in 10/sup 8/ can be obtained.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2003•7 citations

Quantum Effects in Josephson Arrays and High Critical Temperature Superconductors

Eric Roddick

•Jan 1, 1995•0 citations

Influence of Non-equilibrium Noise on Quantum Superconducting Devices

Jen-Hao Yeh, Jay C. LeFebvre, Baladitya Suri +3 more

Bulletin of the American Physical Society•Mar 2, 2015•0 citations

Noise Analysis for Millimeter-Wave Driving of High-Temperature Superconductor Josephson Junction Arrays

Changhao Zhao, Yafang Lian, Da Xu +6 more

High-temperature superconductor Josephson junction arrays were irradiated with millimeter-wave of approximately 70 GHz. The junction arrays were composed of 15 bicrystal YBCO junctions in series and produced DC voltage output of up to 2 mV, which was sampled by a commercial nanovoltmeter. The measured Vppof voltage fluctuations was on the order of 0.6 μV, exceeding the intrinsic fluctuation of the nanovoltmeter itself. To identify the origin of the excessive fluctuations, the phase noise and harmonic distortion of the millimeter-wave signal were analyzed and finally excluded from the major cause of the performance degradation. While millimeter-wave filtering and DC wiring of the apparatus can be improved, the results showed the feasibility of the millimeter-wave driving architecture and the noise analysis framework can be applied to development of even higher frequency drives into THz range.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations
Josephson junction arrays could be competitive candidates for radiation sources in the frequency range from 0.5 to 1.5 THz. This is the range where compact solid-state continuous wave sources are most lacking. We investigated the millimeter-wave radiation from arrays of high-temperature superconductor bicrystal Josephson junctions embedded in a quasi-optical resonator. The novel approach of utilizing the intrinsic resonance modes of the substrate to improve the impedance coupling between the series array of discrete Josephson junctions and the quasi-optical resonator was investigated by experiments and electromagnetic field simulations. Radiation from the arrays containing up to 536 junctions was detected at about 80 GHz and liquid nitrogen temperature using a low-noise receiver. The detected maximum radiation power of the arrays was about 50 pW and the peak voltage agreed exactly with the Josephson current–voltage relation.
High-temperature superconductor Josephson junction arrays were irradiated with millimeter-wave of approximately 70 GHz. The junction arrays were composed of 15 bicrystal YBCO junctions in series and produced DC voltage output of up to 2 mV, which was sampled by a commercial nanovoltmeter. The measured Vppof voltage fluctuations was on the order of 0.6 μV, exceeding the intrinsic fluctuation of the nanovoltmeter itself. To identify the origin of the excessive fluctuations, the phase noise and harmonic distortion of the millimeter-wave signal were analyzed and finally excluded from the major cause of the performance degradation. While millimeter-wave filtering and DC wiring of the apparatus can be improved, the results showed the feasibility of the millimeter-wave driving architecture and the noise analysis framework can be applied to development of even higher frequency drives into THz range.