Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Superconducting Single Photon Detector Science and Engineering

Sae Woo Nam

Published Jan 1, 2017• 0 citations
Publisher

Abstract

Single-photon detectors are an essential tool for a wide range of applications. Ideally, a single photon detector generates a measurable signal only when a single photon is absorbed. Since the first reported detection of a single photon using a superconducting nanowire in 2001, rapid progress has been made in the development and application of superconducting nanowire single photon detectors with ideal properties. I will briefly describe recent progress in detector development at NIST.

DOI
10.1364/cleo_qels.2017.ff1e.3

Related papers

Nanowire superconducting single photon detectors progress and promise1

Sae Woo Nam, Varun Boehm Verma, Michael S. Allman +7 more

Since the first reported detection of a single photon using a superconducting nanowire in 2001, rapid progress has been made in the development and application of superconducting nanowire single photon detectors (SNSPD or SSPD). I will briefly describe use of these detectors in new applications, progress in detector developments, and describe areas of research and their potential impact.

Conference on Lasers and Electro-Optics•Jan 1, 2014•1 citation

Superconducting single-photon detectors for integrated quantum photonics

Ilya A. Stepanov, Oksana I. Shmonina, Evgeniy V. Sergeev +7 more

Single-photon detection possibility is a fundamental requirement for quantum technologies, including communication, computing and sensing. To achieve scalability and practical deployment, increasing attention is being directed toward integration of detectors with photonic integrated circuits, which offer compactness and compatibility with mass production. Superconducting nanowire single-photon detectors have emerged as the leading solution, combining near-unity efficiency, high temporal performance and the ability to be embedded across a wide range of photonic material platforms. In this review we trace the development of integrated superconducting nanowire single-photon detectors from early demonstrations to recent advances, outlining the progress in device architectures, material engineering and integration strategies. We also discuss performance benchmarks, emerging alternative designs, the future opportunities and challenges for this rapidly evolving field.

physics.opticsCross-listedarXiv:2605.14829•May 15, 2026•0 citations

Progress on large-scale superconducting nanowire single-photon detectors

Stephan Steinhauer, Samuel Gyger, Val Zwiller

Superconducting nanowires have emerged as a powerful tool for detecting single photons in the visible and near-infrared range with excellent device performance metrics. We outline challenges and future directions related to the up-scaling of nanowire devices and detector systems toward widespread applications in demanding real-world settings. Progress on achieving superconducting single-photon detectors with a large active area and an increasing number of pixels is reviewed, comparing the recent literature in terms of the reported key detector parameters. Furthermore, we summarize currently available readout and multiplexing schemes for multi-pixel detector arrays and discuss implications of the recently discovered microwire-based detector geometries.

Applied Physics Letters•Mar 8, 2021•79 citations

Recent Progress and Application of Superconducting Nanowire Single-Photon Detectors

Taro Yamashita, Shigehito Miki, Hirotaka Terai

In this review, we present recent advances relating to superconducting nanowire single-photon detectors (SSPDs or SNSPDs) and their broad range of applications. During a period exceeding ten years, the system performance of SSPDs has been drastically improved, and lately excellent detection efficiencies have been realized in practical systems for a wide range of target photon wavelengths. Owing to their advantages such as high system detection efficiency, low dark count rate, and excellent timing jitter, SSPDs have found application in various research fields such as quantum information, quantum optics, optical communication, and also in the life sciences. We summarize the photon detection principle and the current performance status of practical SSPD systems. In addition, we introduce application examples in which SSPDs have been applied.

IEICE Transactions on Electronics•Jan 1, 2017•31 citations

Superconducting nanowire single-photon detectors: A perspective on evolution, state-of-the-art, future developments, and applications

Iman Esmaeil Zadeh, Jin Chang, Johannes W. N. Los +5 more

Two decades after their demonstration, superconducting nanowire single-photon detectors (SNSPDs) have become indispensable tools for quantum photonics as well as for many other photon-starved applications. This invention has not only led to a burgeoning academic field with a wide range of applications but also triggered industrial efforts. Current state-of-the-art SNSPDs combine near-unity detection efficiency over a wide spectral range, low dark counts, short dead times, and picosecond time resolution. The present perspective discusses important milestones and progress of SNSPDs research, emerging applications, and future challenges and gives an outlook on technological developments required to bring SNSPDs to the next level: a photon-counting, fast time-tagging imaging, and multi-pixel technology that is also compatible with quantum photonic integrated circuits.

Applied Physics Letters•May 10, 2021•356 citations

Superconducting single photon detectors

Sae Woo Nam, Brice Calkins, T. Gerritts +9 more

There is increasing interest in using superconducting optical photon detectors in a variety of applications. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will describe our work on two types of superconducting detectors, the Superconducting Nanowire Single Photon Detector (SNSPD or nSSPD) and superconducting Transition-Edge Sensor (TES). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. An example of this detector is shown in Fig 1(a). In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[1]. Fig 1(b) is an example of a TES detector with gold cooling fins to enhance timing of the detector[2]. By exploiting the sharp superconducting-to-normal resistive transition of tungsten at 100mK, TES detectors give an output signal that is proportional to the cumulative energy in an absorption event. This proportional pulse-height enables the determination of the energy absorbed by the TES and the direct conversion of sensor pulse-height into photon number. I will discuss our progress towards developing both types of detectors with quantum efficiencies approaching 100%.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•0 citations
Single-photon detectors are an essential tool for a wide range of applications. Ideally, a single photon detector generates a measurable signal only when a single photon is absorbed. Since the first reported detection of a single photon using a superconducting nanowire in 2001, rapid progress has been made in the development and application of superconducting nanowire single photon detectors with ideal properties. I will briefly describe recent progress in detector development at NIST.
Single-photon detection possibility is a fundamental requirement for quantum technologies, including communication, computing and sensing. To achieve scalability and practical deployment, increasing attention is being directed toward integration of detectors with photonic integrated circuits, which offer compactness and compatibility with mass production. Superconducting nanowire single-photon detectors have emerged as the leading solution, combining near-unity efficiency, high temporal performance and the ability to be embedded across a wide range of photonic material platforms. In this review we trace the development of integrated superconducting nanowire single-photon detectors from early demonstrations to recent advances, outlining the progress in device architectures, material engineering and integration strategies. We also discuss performance benchmarks, emerging alternative designs, the future opportunities and challenges for this rapidly evolving field.
Superconducting nanowires have emerged as a powerful tool for detecting single photons in the visible and near-infrared range with excellent device performance metrics. We outline challenges and future directions related to the up-scaling of nanowire devices and detector systems toward widespread applications in demanding real-world settings. Progress on achieving superconducting single-photon detectors with a large active area and an increasing number of pixels is reviewed, comparing the recent literature in terms of the reported key detector parameters. Furthermore, we summarize currently available readout and multiplexing schemes for multi-pixel detector arrays and discuss implications of the recently discovered microwire-based detector geometries.
In this review, we present recent advances relating to superconducting nanowire single-photon detectors (SSPDs or SNSPDs) and their broad range of applications. During a period exceeding ten years, the system performance of SSPDs has been drastically improved, and lately excellent detection efficiencies have been realized in practical systems for a wide range of target photon wavelengths. Owing to their advantages such as high system detection efficiency, low dark count rate, and excellent timing jitter, SSPDs have found application in various research fields such as quantum information, quantum optics, optical communication, and also in the life sciences. We summarize the photon detection principle and the current performance status of practical SSPD systems. In addition, we introduce application examples in which SSPDs have been applied.
Two decades after their demonstration, superconducting nanowire single-photon detectors (SNSPDs) have become indispensable tools for quantum photonics as well as for many other photon-starved applications. This invention has not only led to a burgeoning academic field with a wide range of applications but also triggered industrial efforts. Current state-of-the-art SNSPDs combine near-unity detection efficiency over a wide spectral range, low dark counts, short dead times, and picosecond time resolution. The present perspective discusses important milestones and progress of SNSPDs research, emerging applications, and future challenges and gives an outlook on technological developments required to bring SNSPDs to the next level: a photon-counting, fast time-tagging imaging, and multi-pixel technology that is also compatible with quantum photonic integrated circuits.
There is increasing interest in using superconducting optical photon detectors in a variety of applications. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will describe our work on two types of superconducting detectors, the Superconducting Nanowire Single Photon Detector (SNSPD or nSSPD) and superconducting Transition-Edge Sensor (TES). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. An example of this detector is shown in Fig 1(a). In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[1]. Fig 1(b) is an example of a TES detector with gold cooling fins to enhance timing of the detector[2]. By exploiting the sharp superconducting-to-normal resistive transition of tungsten at 100mK, TES detectors give an output signal that is proportional to the cumulative energy in an absorption event. This proportional pulse-height enables the determination of the energy absorbed by the TES and the direct conversion of sensor pulse-height into photon number. I will discuss our progress towards developing both types of detectors with quantum efficiencies approaching 100%.