Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Atom traps on an evanescent-wave mirror

Andriy Shevchenko

Published Oct 8, 2004• 1 citation
OpenAlex

Abstract

During the past two decades the dramatic developments in cooling and trapping of gaseous atomic samples has produced a variety of techniques to manipulate the external and internal atomic states with electromagnetic fields. The research efforts so far have mainly focused on studying the fundamental aspects of modern quantum physics, although numerous practical applications, e.g., in integrated matter-wave optics and quantum information processing, are expected to soon be added to the already established atom-optics products, such as atomic clocks and acceleration sensors. One of the most promising foundations for the practical applications of Bose-Einstein condensates (BECs) and coherent matter waves is the technology based on the creation of microscopic atom traps on the surface of a solid substrate. This trapping technique has recently been used to successfully control the motion of microscopic atomic samples and to significantly simplify the creation of BEC. The main research topic of this thesis is the development and design of surface-mounted atom traps on transparent dielectric substrates. Such traps could provide an extra flexibility and stability for the experiments, since they would allow unimpeded control of atoms with laser light and provide reduction of magnetic-field fluctuations associated with the thermal motion of free electrons in the substrate material. The thesis describes several novel approaches to the creation of such surface traps by superimposing repulsive evanescent optical waves with strongly localized magnetic or electric fields. These fields can be produced by either conductive or permanently magnetized, optically transparent patterns imprinted in a thin layer on a transparent dielectric substrate. The evanescent wave can also be used to cool the atoms in a gravitational field before loading them into the microtrap. The lateral confinement of the atoms on the evanescent wave can be realized with a thin-walled hollow laser beam, the creation of which is demonstrated in the thesis. The thesis also describes certain general aspects concerning evanescent-wave cooling. In particular, the influence that multiple reabsorption of resonance-frequency photons in a cloud of evanescent-wave cooled atoms has on the cooling efficiency is investigated. Also, a theoretical model based on classical statistical mechanics and thermodynamics is introduced to show how a microtrap on an evanescent-wave mirror can be used to decrease the temperature, increase the phase-space density, and provide temperature conserving spin-polarization of the atoms.

Related papers

Microscopic atom traps on an evanescent-wave mirror

Andriy Shevchenko, A. Jaakkola, Antti Hakola +3 more

An alternative technique is proposed to create microscopic atom traps loaded with atoms from a gravito-optical surface trap (GOT), which is composed of an evanescent-wave mirror and a vertically aligned hollow laser beam. Our trap design is based on the use of current-carrying transparent conductors and transparent permanent magnets fabricated on the surface of a glass prism in the form of an internal structure of a refractive-index-matched thin dielectric film. The conductors can be fabricated of indium tin oxide (ITO) and the magnets of yttrium iron garnet (YIG). Different kinds of traps may be envisaged: i) spin-independent electro-optical ii) magneto-optical for either high- or low-field seeking atoms, and iii) purely magnetic for atoms in the low-field seeking states. In case iii), the magnetic-field minimum is located far enough from the film surface to make the contribution of the optical field negligible.

European Quantum Electronics Conference (EQEC)•Jan 1, 2003•0 citations

Novel dipole-force atom traps

Inka B. Manek-Hönninger, U. Moslener, Yu. B. Ovchinnikov +5 more

We discuss our recent experimental demonstrations of three novel atom traps which are all based on the optical dipole force in far-detuned laser light. In the gravito-optical surface trap (GOST), Cs atoms are trapped and cooled by means of an evanescent-wave mirror very closely above a dielectric surface. This trap allows for optical cooling at very high densities and provides good starting conditions for evaporative cooling to quantum degeneracy and the realization of a 2D quantum gas. The conical atom trap (CAT) uses a hollow blue-detuned laser beam in combination with gravity to trap atoms in a dark spatial region. This trap is experimentally simple and provides high loading efficiency, tight confinement, efficient sub-Doppler cooling, and strong suppression of collisional losses. The standing-wave red-detuned (STAR) trap allows one to confine atoms in a shallow optical potential at a very low photon scattering rate, and is thus an interesting tool for studies of the atomic ground-state dynamics in external electro-magnetic fields. We have studied atomic spin polarization in this trap.

International Conference on Atomic Physics (ICAP)•Jan 1, 1999•0 citations

Experiments in cold atom optics towards precision atom interferometry

David C. Aveline

Atom optics has been a highly active field of research with many scientific breakthroughs over the past two decades, largely due to successful advances in laser technology, microfabrication techniques, and the development of laser cooling and trapping of neutral atoms. This dissertation details several atom optics experiments with the motivation to develop tools and techniques for precision atom wave interferometry. It provides background information about atom optics and the fundamentals behind laser cooling and trapping, including basic techniques for cold gas thermometry and absorptive detection of atoms. A brief overview of magnetic trapping and guiding in tight wire-based traps is also provided before the experimental details are presented. ❧ We developed a novel laser source of 780 nm light using frequency-doubled 1560 nm fiber amplifier. This laser system provided up to a Watt of tunable frequency stabilized light for two Rb laser cooling and trapping experiments. One system generates Bose-Einstein condensates in an optical trap while the second is based on atom chip magnetic traps. The atom chip system, detailed in this thesis, was designed and built to develop the tools necessary for transport and loading large numbers of cold atoms and explore the potential for guided atom interferometry. Techniques and results from this experiment are presented, including an efficient magnetic transport and loading method to deliver cold atom to atom chip traps. We also developed a modeling tool for the magnetic fields formed by coiled wire geometries, as well as planar wire patterns. These models helped us design traps and determine adiabatic transportation of cold atoms between macro-scale traps and micro-traps formed on atom chips. Having achieved near unity transfer efficiency, we demonstrated that this approach promises to be a consistent method for loading large numbers of atoms into micro-traps. Furthermore, we discuss an in situ imaging technique to investigate magnetic field contours of the traps and the dynamics of atoms within those confining potentials. We also controlled the propagation along the atom chip guides by accelerating atoms with longitudinal magnetic gradients, and investigated an atom focusing scheme. ❧ While the atom chip wire guides perform a role analogous to optical fibers guiding light waves, ""free space"" cold atoms offer great opportunity for precision interferometry. We describe a second on-going atom optics experiment that measures gravity gradients using a pair of atom fountain interferometers separated by one meter. We have demonstrated Gravity Gradiometer resolution down to 4x10⁻⁹ g/m using a 40 kg test mass. The atomic physics subsystem is described in detail, including the vacuum, cold atom source, optics, magnetic coils and shields, and vibration isolation and compensation. The system is designed to be a compact, robust, transportable instrument, taking strides towards future gravity gradient measurements in the field. In the realm of space applications, there has been interest for micro-gravity science experiments aboard the International Space Station, along with instrument development for gravity mapping of Earth and planetary bodies with satellite-based instruments. Furthermore, there are ground-based applications for gravity imaging of local density distributions, precision measurement of gravity, as well as proposals for redefining the kilogram, detecting gravitational waves and determining the Gravitational constant.

•Jan 1, 2015•1 citation

Einfang und Manipulation lasergekühlter metastabiler Argonatome an einer Oberfläche

Dominik Schneble

This thesis discusses experiments on the all-optical trapping and manipulation of laser-cooled metastable argon atoms at a surface. A magneto-optical surface trap (MOST) has been realized and studied. This novel hybrid trap combines a magneto-optical trap at a metallic surface with an optical evanescent-wave atom mirror. It allows for laser-cooling and trapping of atoms in contact with an evanescent light field that separates the atomic cloud from the surface by a fraction of an optical wavelength. Based on this work, the continuous loading of a planar matter waveguide has been demonstrated. Loading into the waveguide, which was formed by the optical potential of a red-detuned standing light wave above the surface, was achieved via evanescent-field optical pumping from the MOST in sub-µm distance from the surface. In subsequent experiments, several light-induced atom-optical elements have been demonstrated in the planar waveguide geometry, including a continuous atom source, a switchable channel guide, an atom detector and an optical surface lattice. The source, the channel and the detector have been combined to form a simple atom-optical integrated circuit.

•Jan 1, 2002•0 citations

Atomic relaxation processes near conducting and superconducting surfaces

R. Fermani

The aim of this thesis is to investigate the interaction of neutral atoms with conducting and superconducting surfaces. Experimental advances in the magnetic confinement of ultracold atoms have shown that they can act as a powerful tool in a wide range of phenomena such as electric and magnetic field imaging and matter wave interferometry. Coherent manipulation of atoms and ever smaller magnetic traps are essential elements in the implementation of integrated quantum devices for fundamental research, quantum information processing and precision measurements. This thesis considers main influences on atoms placed within three different environments which are useful in achieving miniaturization and efficient control in atomic magnetic traps: carbon nanotubes, dielectric surfaces and superconducting thin films. The possibility of holding atoms near the outside of a carbon nanotubes will be addressed. In order to give a qualitative analysis of the atom-nanotube interaction, thermally induced spin-flips and the Casimir-Polder potential have been considered. The comparison between these two effects is presented in this thesis. It indicates that the Casimir-Polder force is the dominant loss mechanism and an estimation of the minimum trapping distance is given based on its effect. Secondly, a first-principles derivation of spatial atomic-sublevel decoherence near dielectric and metallic surfaces will be presented. The rate obtained for the decay of spatial coherence has dual implications, on one hand, it can be considered as a measure of the coherence length of the fluctuations of the electromagnetic field arising from a given substrate. On the other hand, it turns out to be relevant for quantum information encoding in double well potentials. Finally, the known spin-flip transition rate will be linked to the flux noise spectrum in superconducting thin films showing the feasibility of using cold atomic clouds in the investigation of vortex dynamics.

•Jan 1, 2008•0 citations

An apparatus for the production of Bose-Einstein condensates in tunable geometries on a chip

Thomas J. Barrett

Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with $10^5$ atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.

•Jul 12, 2017•0 citations
During the past two decades the dramatic developments in cooling and trapping of gaseous atomic samples has produced a variety of techniques to manipulate the external and internal atomic states with electromagnetic fields. The research efforts so far have mainly focused on studying the fundamental aspects of modern quantum physics, although numerous practical applications, e.g., in integrated matter-wave optics and quantum information processing, are expected to soon be added to the already established atom-optics products, such as atomic clocks and acceleration sensors. One of the most promising foundations for the practical applications of Bose-Einstein condensates (BECs) and coherent matter waves is the technology based on the creation of microscopic atom traps on the surface of a solid substrate. This trapping technique has recently been used to successfully control the motion of microscopic atomic samples and to significantly simplify the creation of BEC. The main research topic of this thesis is the development and design of surface-mounted atom traps on transparent dielectric substrates. Such traps could provide an extra flexibility and stability for the experiments, since they would allow unimpeded control of atoms with laser light and provide reduction of magnetic-field fluctuations associated with the thermal motion of free electrons in the substrate material. The thesis describes several novel approaches to the creation of such surface traps by superimposing repulsive evanescent optical waves with strongly localized magnetic or electric fields. These fields can be produced by either conductive or permanently magnetized, optically transparent patterns imprinted in a thin layer on a transparent dielectric substrate. The evanescent wave can also be used to cool the atoms in a gravitational field before loading them into the microtrap. The lateral confinement of the atoms on the evanescent wave can be realized with a thin-walled hollow laser beam, the creation of which is demonstrated in the thesis. The thesis also describes certain general aspects concerning evanescent-wave cooling. In particular, the influence that multiple reabsorption of resonance-frequency photons in a cloud of evanescent-wave cooled atoms has on the cooling efficiency is investigated. Also, a theoretical model based on classical statistical mechanics and thermodynamics is introduced to show how a microtrap on an evanescent-wave mirror can be used to decrease the temperature, increase the phase-space density, and provide temperature conserving spin-polarization of the atoms.
An alternative technique is proposed to create microscopic atom traps loaded with atoms from a gravito-optical surface trap (GOT), which is composed of an evanescent-wave mirror and a vertically aligned hollow laser beam. Our trap design is based on the use of current-carrying transparent conductors and transparent permanent magnets fabricated on the surface of a glass prism in the form of an internal structure of a refractive-index-matched thin dielectric film. The conductors can be fabricated of indium tin oxide (ITO) and the magnets of yttrium iron garnet (YIG). Different kinds of traps may be envisaged: i) spin-independent electro-optical ii) magneto-optical for either high- or low-field seeking atoms, and iii) purely magnetic for atoms in the low-field seeking states. In case iii), the magnetic-field minimum is located far enough from the film surface to make the contribution of the optical field negligible.
We discuss our recent experimental demonstrations of three novel atom traps which are all based on the optical dipole force in far-detuned laser light. In the gravito-optical surface trap (GOST), Cs atoms are trapped and cooled by means of an evanescent-wave mirror very closely above a dielectric surface. This trap allows for optical cooling at very high densities and provides good starting conditions for evaporative cooling to quantum degeneracy and the realization of a 2D quantum gas. The conical atom trap (CAT) uses a hollow blue-detuned laser beam in combination with gravity to trap atoms in a dark spatial region. This trap is experimentally simple and provides high loading efficiency, tight confinement, efficient sub-Doppler cooling, and strong suppression of collisional losses. The standing-wave red-detuned (STAR) trap allows one to confine atoms in a shallow optical potential at a very low photon scattering rate, and is thus an interesting tool for studies of the atomic ground-state dynamics in external electro-magnetic fields. We have studied atomic spin polarization in this trap.
Atom optics has been a highly active field of research with many scientific breakthroughs over the past two decades, largely due to successful advances in laser technology, microfabrication techniques, and the development of laser cooling and trapping of neutral atoms. This dissertation details several atom optics experiments with the motivation to develop tools and techniques for precision atom wave interferometry. It provides background information about atom optics and the fundamentals behind laser cooling and trapping, including basic techniques for cold gas thermometry and absorptive detection of atoms. A brief overview of magnetic trapping and guiding in tight wire-based traps is also provided before the experimental details are presented. ❧ We developed a novel laser source of 780 nm light using frequency-doubled 1560 nm fiber amplifier. This laser system provided up to a Watt of tunable frequency stabilized light for two Rb laser cooling and trapping experiments. One system generates Bose-Einstein condensates in an optical trap while the second is based on atom chip magnetic traps. The atom chip system, detailed in this thesis, was designed and built to develop the tools necessary for transport and loading large numbers of cold atoms and explore the potential for guided atom interferometry. Techniques and results from this experiment are presented, including an efficient magnetic transport and loading method to deliver cold atom to atom chip traps. We also developed a modeling tool for the magnetic fields formed by coiled wire geometries, as well as planar wire patterns. These models helped us design traps and determine adiabatic transportation of cold atoms between macro-scale traps and micro-traps formed on atom chips. Having achieved near unity transfer efficiency, we demonstrated that this approach promises to be a consistent method for loading large numbers of atoms into micro-traps. Furthermore, we discuss an in situ imaging technique to investigate magnetic field contours of the traps and the dynamics of atoms within those confining potentials. We also controlled the propagation along the atom chip guides by accelerating atoms with longitudinal magnetic gradients, and investigated an atom focusing scheme. ❧ While the atom chip wire guides perform a role analogous to optical fibers guiding light waves, ""free space"" cold atoms offer great opportunity for precision interferometry. We describe a second on-going atom optics experiment that measures gravity gradients using a pair of atom fountain interferometers separated by one meter. We have demonstrated Gravity Gradiometer resolution down to 4x10⁻⁹ g/m using a 40 kg test mass. The atomic physics subsystem is described in detail, including the vacuum, cold atom source, optics, magnetic coils and shields, and vibration isolation and compensation. The system is designed to be a compact, robust, transportable instrument, taking strides towards future gravity gradient measurements in the field. In the realm of space applications, there has been interest for micro-gravity science experiments aboard the International Space Station, along with instrument development for gravity mapping of Earth and planetary bodies with satellite-based instruments. Furthermore, there are ground-based applications for gravity imaging of local density distributions, precision measurement of gravity, as well as proposals for redefining the kilogram, detecting gravitational waves and determining the Gravitational constant.
This thesis discusses experiments on the all-optical trapping and manipulation of laser-cooled metastable argon atoms at a surface. A magneto-optical surface trap (MOST) has been realized and studied. This novel hybrid trap combines a magneto-optical trap at a metallic surface with an optical evanescent-wave atom mirror. It allows for laser-cooling and trapping of atoms in contact with an evanescent light field that separates the atomic cloud from the surface by a fraction of an optical wavelength. Based on this work, the continuous loading of a planar matter waveguide has been demonstrated. Loading into the waveguide, which was formed by the optical potential of a red-detuned standing light wave above the surface, was achieved via evanescent-field optical pumping from the MOST in sub-µm distance from the surface. In subsequent experiments, several light-induced atom-optical elements have been demonstrated in the planar waveguide geometry, including a continuous atom source, a switchable channel guide, an atom detector and an optical surface lattice. The source, the channel and the detector have been combined to form a simple atom-optical integrated circuit.
The aim of this thesis is to investigate the interaction of neutral atoms with conducting and superconducting surfaces. Experimental advances in the magnetic confinement of ultracold atoms have shown that they can act as a powerful tool in a wide range of phenomena such as electric and magnetic field imaging and matter wave interferometry. Coherent manipulation of atoms and ever smaller magnetic traps are essential elements in the implementation of integrated quantum devices for fundamental research, quantum information processing and precision measurements. This thesis considers main influences on atoms placed within three different environments which are useful in achieving miniaturization and efficient control in atomic magnetic traps: carbon nanotubes, dielectric surfaces and superconducting thin films. The possibility of holding atoms near the outside of a carbon nanotubes will be addressed. In order to give a qualitative analysis of the atom-nanotube interaction, thermally induced spin-flips and the Casimir-Polder potential have been considered. The comparison between these two effects is presented in this thesis. It indicates that the Casimir-Polder force is the dominant loss mechanism and an estimation of the minimum trapping distance is given based on its effect. Secondly, a first-principles derivation of spatial atomic-sublevel decoherence near dielectric and metallic surfaces will be presented. The rate obtained for the decay of spatial coherence has dual implications, on one hand, it can be considered as a measure of the coherence length of the fluctuations of the electromagnetic field arising from a given substrate. On the other hand, it turns out to be relevant for quantum information encoding in double well potentials. Finally, the known spin-flip transition rate will be linked to the flux noise spectrum in superconducting thin films showing the feasibility of using cold atomic clouds in the investigation of vortex dynamics.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 10510^5105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.