Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Atomic relaxation processes near conducting and superconducting surfaces

R. Fermani

Published Jan 1, 2008• 0 citations
OpenAlex

Abstract

The aim of this thesis is to investigate the interaction of neutral atoms with conducting and superconducting surfaces. Experimental advances in the magnetic confinement of ultracold atoms have shown that they can act as a powerful tool in a wide range of phenomena such as electric and magnetic field imaging and matter wave interferometry. Coherent manipulation of atoms and ever smaller magnetic traps are essential elements in the implementation of integrated quantum devices for fundamental research, quantum information processing and precision measurements. This thesis considers main influences on atoms placed within three different environments which are useful in achieving miniaturization and efficient control in atomic magnetic traps: carbon nanotubes, dielectric surfaces and superconducting thin films. The possibility of holding atoms near the outside of a carbon nanotubes will be addressed. In order to give a qualitative analysis of the atom-nanotube interaction, thermally induced spin-flips and the Casimir-Polder potential have been considered. The comparison between these two effects is presented in this thesis. It indicates that the Casimir-Polder force is the dominant loss mechanism and an estimation of the minimum trapping distance is given based on its effect. Secondly, a first-principles derivation of spatial atomic-sublevel decoherence near dielectric and metallic surfaces will be presented. The rate obtained for the decay of spatial coherence has dual implications, on one hand, it can be considered as a measure of the coherence length of the fluctuations of the electromagnetic field arising from a given substrate. On the other hand, it turns out to be relevant for quantum information encoding in double well potentials. Finally, the known spin-flip transition rate will be linked to the flux noise spectrum in superconducting thin films showing the feasibility of using cold atomic clouds in the investigation of vortex dynamics.

Related papers

Decay processes in the presence of thin superconducting films

Per Kristian Rekdal, Bo-Sture Skagerstam

In a recent paper [Phys. Rev. Lett. 97, 070401 (2006)] the transition rate of magnetic spin-flip of a neutral two-level atom trapped in the vicinity of a thick superconducting body was studied. In the present paper we will extend these considerations to a situation with an atom at various distances from a dielectric film. Rates for the corresponding electric dipole-flip transition will also be considered. The rates for these atomic flip transitions can be reduced or enhanced, and in some situations they can even be completely suppressed. For a superconducting film or a thin film of a perfect conducting material various analytical expressions are derived that reveals the dependence of the physical parameters at hand.

arXiv:quant-ph/0609158•Physical Review A•Feb 27, 2007•6 citations

A cold atom apparatus for the microscopy of thin membranes

Amruta Gadge

Ultracold atomic gases can be utilised as extremely sensitive probes of their surrounding environment. In particular, samples of ultracold atoms confined using chip-based microtraps are an ideal tool for mapping electric and magnetic field landscapes. Over the course of this thesis, a new experiment capable of performing surface microscopy using magnetically trapped clouds of cold rubidium-87 atoms has been built. The focus of the work is on the design and construction of the experimental system, which must incorporate many different aspects for manipulating thermal atomic gases, with a view to positioning them at sub-micron distances from special surfaces. This reduced atom-surface separation is necessary for implementing a high resolution, high sensitivity magnetic field sensor with cold atoms. Although current microfabrication techniques easily enable trapping at distances on the order of micrometres, several distance-dependent surface effects - such as the Casimir-Polder force, Johnson-Nyquist noise, and stray potentials - eventually impede magnetic trapping at the sub-micron level. These surface effects can greatly modify the confining potentials, which reduces the trap depth and consequently leads to an additional loss rate of atoms from the trap. We have explored the possibility of using special surfaces such as nano-membranes of silicon nitride and graphene, which have reduced atom- surface interactions, to enable trapping distances at the sub-micron level. A multilayer printed circuit board chip has been designed to form an initial magnetic trap and then transport the cloud of atoms to a desired location over the samples. This chip, along with various samples, is mounted on a custom-made electrical feedthrough designed to make connections to all conductor that are inside the vacuum chamber. The initial cloud of cold atoms can then be prepared in the central region of the chip and delivered to the location of the samples on either side. The experimental system is able to routinely capture over 10^8 rubidium-87 atoms at a temperature of 80 micro-Kelvin in a magneto-optical trap using a novel scheme of five laser beams. A method is demonstrated for enhancing the atom number in the magneto-optical traps by a factor of two by using laser beams with two slightly different frequencies. Atoms from the magneto-optical trap are then transferred to a purely magnetic trap formed by the wires on the printed circuit board chip. Time-dependent currents in the chip wires then create a dynamic potential, which is shown to successfully transport the atomic sample over a distance of 12 millimetre with minimal atom loss. This thesis describes the development of the apparatus in detail, along with careful characterisation of the cold cloud at various stages of the experimental sequence. Initial results on the long distance atom transport are presented. Finally, the experimental results of the two frequency magneto-optical trap for atom number improvement are discussed.

•Jul 19, 2018•0 citations

Trapping cold atoms near carbon nanotubes: Thermal spin flips and Casimir-Polder potential

R. Fermani, Stefan Scheel, P. L. Knight

We investigate the possibility of trapping ultracold $^{87}\mathrm{Rb}$ atoms near the outside of a metallic carbon nanotube, which we imagine using as a miniaturized current-carrying wire. We calculate atomic spin-flip lifetimes and compare the strength of the Casimir-Polder potential with the magnetic trapping potential. Our analysis indicates that the Casimir-Polder force is the dominant loss mechanism, and we compute the minimum distance to the carbon nanotube at which the atoms can be trapped to be larger than $100\phantom{\rule{0.3em}{0ex}}\mathrm{nm}$.

arXiv:quant-ph/0703155•Physical Review A•Jun 28, 2007•48 citations

Atom traps on an evanescent-wave mirror

Andriy Shevchenko

During the past two decades the dramatic developments in cooling and trapping of gaseous atomic samples has produced a variety of techniques to manipulate the external and internal atomic states with electromagnetic fields. The research efforts so far have mainly focused on studying the fundamental aspects of modern quantum physics, although numerous practical applications, e.g., in integrated matter-wave optics and quantum information processing, are expected to soon be added to the already established atom-optics products, such as atomic clocks and acceleration sensors. One of the most promising foundations for the practical applications of Bose-Einstein condensates (BECs) and coherent matter waves is the technology based on the creation of microscopic atom traps on the surface of a solid substrate. This trapping technique has recently been used to successfully control the motion of microscopic atomic samples and to significantly simplify the creation of BEC. The main research topic of this thesis is the development and design of surface-mounted atom traps on transparent dielectric substrates. Such traps could provide an extra flexibility and stability for the experiments, since they would allow unimpeded control of atoms with laser light and provide reduction of magnetic-field fluctuations associated with the thermal motion of free electrons in the substrate material. The thesis describes several novel approaches to the creation of such surface traps by superimposing repulsive evanescent optical waves with strongly localized magnetic or electric fields. These fields can be produced by either conductive or permanently magnetized, optically transparent patterns imprinted in a thin layer on a transparent dielectric substrate. The evanescent wave can also be used to cool the atoms in a gravitational field before loading them into the microtrap. The lateral confinement of the atoms on the evanescent wave can be realized with a thin-walled hollow laser beam, the creation of which is demonstrated in the thesis. The thesis also describes certain general aspects concerning evanescent-wave cooling. In particular, the influence that multiple reabsorption of resonance-frequency photons in a cloud of evanescent-wave cooled atoms has on the cooling efficiency is investigated. Also, a theoretical model based on classical statistical mechanics and thermodynamics is introduced to show how a microtrap on an evanescent-wave mirror can be used to decrease the temperature, increase the phase-space density, and provide temperature conserving spin-polarization of the atoms.

•Oct 8, 2004•1 citation

Laser Cooling and Trapping of Neutral Strontium for Spectroscopic Measurements of Casimir-Polder Potentials

Eryn C. Cook

Casimir and Casimir-Polder effects are forces between electrically neutral bodies and particles in vacuum, arising entirely from quantum fluctuations. The modification to the vacuum electromagnetic-field modes imposed by the presence of any particle or surface can result in these mechanical forces, which are often the dominant interaction at small separations. These effects play an increasingly critical role in the operation of micro- and nano-mechanical systems as well as miniaturized atomic traps for precision sensors and quantum-information devices. Despite their fundamental importance, calculations present theoretical and numeric challenges, and precise atom-surface potential measurements are lacking in many geometric and distance regimes. \n \nThe spectroscopic measurement of Casimir-Polder-induced energy level shifts in optical-lattice trapped atoms offers a new experimental method to probe atom-surface interactions. Strontium, the current front-runner among optical frequency metrology systems, has demonstrated characteristics ideal for such precision measurements. An alkaline earth atom possessing ultra-narrow intercombination transitions, strontium can be loaded into an optical lattice at the “magic” wavelength where the probe transition is unperturbed by the trap light. Translation of the lattice will permit controlled transport of tightly-confined atomic samples to well-calibrated atom- surface separations, while optical transition shifts serve as a direct probe of the Casimir-Polder potential. \n \nWe have constructed a strontium magneto-optical trap (MOT) for future Casimir-Polder experiments. This thesis will describe the strontium apparatus, initial trap performance, and some details of the proposed measurement procedure.

•Apr 10, 2018•1 citation

Exploring surface interactions with atom chips

Carsten Henkel

We review the current status of the field of atom-surface interactions, with an emphasis on the regimes specific to atom chips. Recent developments in theory and experiment are highlighted. In particular, atom-surface interactions define physical limits for miniaturization and coherent operation. This implies constraints for applications in quantum information processing or matter wave interferometry. We focus on atom-surface interaction potentials induced by vacuum fluctuations (Van der Waals and Casimir-Polder forces), and on transitions between atomic quantum states that are induced by thermally excited magnetic near fields. Open questions and current challenges are sketched.

arXiv:quant-ph/0512043•Dec 6, 2005•1 citation
The aim of this thesis is to investigate the interaction of neutral atoms with conducting and superconducting surfaces. Experimental advances in the magnetic confinement of ultracold atoms have shown that they can act as a powerful tool in a wide range of phenomena such as electric and magnetic field imaging and matter wave interferometry. Coherent manipulation of atoms and ever smaller magnetic traps are essential elements in the implementation of integrated quantum devices for fundamental research, quantum information processing and precision measurements. This thesis considers main influences on atoms placed within three different environments which are useful in achieving miniaturization and efficient control in atomic magnetic traps: carbon nanotubes, dielectric surfaces and superconducting thin films. The possibility of holding atoms near the outside of a carbon nanotubes will be addressed. In order to give a qualitative analysis of the atom-nanotube interaction, thermally induced spin-flips and the Casimir-Polder potential have been considered. The comparison between these two effects is presented in this thesis. It indicates that the Casimir-Polder force is the dominant loss mechanism and an estimation of the minimum trapping distance is given based on its effect. Secondly, a first-principles derivation of spatial atomic-sublevel decoherence near dielectric and metallic surfaces will be presented. The rate obtained for the decay of spatial coherence has dual implications, on one hand, it can be considered as a measure of the coherence length of the fluctuations of the electromagnetic field arising from a given substrate. On the other hand, it turns out to be relevant for quantum information encoding in double well potentials. Finally, the known spin-flip transition rate will be linked to the flux noise spectrum in superconducting thin films showing the feasibility of using cold atomic clouds in the investigation of vortex dynamics.
In a recent paper [Phys. Rev. Lett. 97, 070401 (2006)] the transition rate of magnetic spin-flip of a neutral two-level atom trapped in the vicinity of a thick superconducting body was studied. In the present paper we will extend these considerations to a situation with an atom at various distances from a dielectric film. Rates for the corresponding electric dipole-flip transition will also be considered. The rates for these atomic flip transitions can be reduced or enhanced, and in some situations they can even be completely suppressed. For a superconducting film or a thin film of a perfect conducting material various analytical expressions are derived that reveals the dependence of the physical parameters at hand.
Ultracold atomic gases can be utilised as extremely sensitive probes of their surrounding environment. In particular, samples of ultracold atoms confined using chip-based microtraps are an ideal tool for mapping electric and magnetic field landscapes. Over the course of this thesis, a new experiment capable of performing surface microscopy using magnetically trapped clouds of cold rubidium-87 atoms has been built. The focus of the work is on the design and construction of the experimental system, which must incorporate many different aspects for manipulating thermal atomic gases, with a view to positioning them at sub-micron distances from special surfaces. This reduced atom-surface separation is necessary for implementing a high resolution, high sensitivity magnetic field sensor with cold atoms. Although current microfabrication techniques easily enable trapping at distances on the order of micrometres, several distance-dependent surface effects - such as the Casimir-Polder force, Johnson-Nyquist noise, and stray potentials - eventually impede magnetic trapping at the sub-micron level. These surface effects can greatly modify the confining potentials, which reduces the trap depth and consequently leads to an additional loss rate of atoms from the trap. We have explored the possibility of using special surfaces such as nano-membranes of silicon nitride and graphene, which have reduced atom- surface interactions, to enable trapping distances at the sub-micron level. A multilayer printed circuit board chip has been designed to form an initial magnetic trap and then transport the cloud of atoms to a desired location over the samples. This chip, along with various samples, is mounted on a custom-made electrical feedthrough designed to make connections to all conductor that are inside the vacuum chamber. The initial cloud of cold atoms can then be prepared in the central region of the chip and delivered to the location of the samples on either side. The experimental system is able to routinely capture over 10^8 rubidium-87 atoms at a temperature of 80 micro-Kelvin in a magneto-optical trap using a novel scheme of five laser beams. A method is demonstrated for enhancing the atom number in the magneto-optical traps by a factor of two by using laser beams with two slightly different frequencies. Atoms from the magneto-optical trap are then transferred to a purely magnetic trap formed by the wires on the printed circuit board chip. Time-dependent currents in the chip wires then create a dynamic potential, which is shown to successfully transport the atomic sample over a distance of 12 millimetre with minimal atom loss. This thesis describes the development of the apparatus in detail, along with careful characterisation of the cold cloud at various stages of the experimental sequence. Initial results on the long distance atom transport are presented. Finally, the experimental results of the two frequency magneto-optical trap for atom number improvement are discussed.
We investigate the possibility of trapping ultracold 87Rb^{87}\mathrm{Rb}87Rb atoms near the outside of a metallic carbon nanotube, which we imagine using as a miniaturized current-carrying wire. We calculate atomic spin-flip lifetimes and compare the strength of the Casimir-Polder potential with the magnetic trapping potential. Our analysis indicates that the Casimir-Polder force is the dominant loss mechanism, and we compute the minimum distance to the carbon nanotube at which the atoms can be trapped to be larger than 100nm100\phantom{\rule{0.3em}{0ex}}\mathrm{nm}100nm.
During the past two decades the dramatic developments in cooling and trapping of gaseous atomic samples has produced a variety of techniques to manipulate the external and internal atomic states with electromagnetic fields. The research efforts so far have mainly focused on studying the fundamental aspects of modern quantum physics, although numerous practical applications, e.g., in integrated matter-wave optics and quantum information processing, are expected to soon be added to the already established atom-optics products, such as atomic clocks and acceleration sensors. One of the most promising foundations for the practical applications of Bose-Einstein condensates (BECs) and coherent matter waves is the technology based on the creation of microscopic atom traps on the surface of a solid substrate. This trapping technique has recently been used to successfully control the motion of microscopic atomic samples and to significantly simplify the creation of BEC. The main research topic of this thesis is the development and design of surface-mounted atom traps on transparent dielectric substrates. Such traps could provide an extra flexibility and stability for the experiments, since they would allow unimpeded control of atoms with laser light and provide reduction of magnetic-field fluctuations associated with the thermal motion of free electrons in the substrate material. The thesis describes several novel approaches to the creation of such surface traps by superimposing repulsive evanescent optical waves with strongly localized magnetic or electric fields. These fields can be produced by either conductive or permanently magnetized, optically transparent patterns imprinted in a thin layer on a transparent dielectric substrate. The evanescent wave can also be used to cool the atoms in a gravitational field before loading them into the microtrap. The lateral confinement of the atoms on the evanescent wave can be realized with a thin-walled hollow laser beam, the creation of which is demonstrated in the thesis. The thesis also describes certain general aspects concerning evanescent-wave cooling. In particular, the influence that multiple reabsorption of resonance-frequency photons in a cloud of evanescent-wave cooled atoms has on the cooling efficiency is investigated. Also, a theoretical model based on classical statistical mechanics and thermodynamics is introduced to show how a microtrap on an evanescent-wave mirror can be used to decrease the temperature, increase the phase-space density, and provide temperature conserving spin-polarization of the atoms.
Casimir and Casimir-Polder effects are forces between electrically neutral bodies and particles in vacuum, arising entirely from quantum fluctuations. The modification to the vacuum electromagnetic-field modes imposed by the presence of any particle or surface can result in these mechanical forces, which are often the dominant interaction at small separations. These effects play an increasingly critical role in the operation of micro- and nano-mechanical systems as well as miniaturized atomic traps for precision sensors and quantum-information devices. Despite their fundamental importance, calculations present theoretical and numeric challenges, and precise atom-surface potential measurements are lacking in many geometric and distance regimes. \n \nThe spectroscopic measurement of Casimir-Polder-induced energy level shifts in optical-lattice trapped atoms offers a new experimental method to probe atom-surface interactions. Strontium, the current front-runner among optical frequency metrology systems, has demonstrated characteristics ideal for such precision measurements. An alkaline earth atom possessing ultra-narrow intercombination transitions, strontium can be loaded into an optical lattice at the “magic” wavelength where the probe transition is unperturbed by the trap light. Translation of the lattice will permit controlled transport of tightly-confined atomic samples to well-calibrated atom- surface separations, while optical transition shifts serve as a direct probe of the Casimir-Polder potential. \n \nWe have constructed a strontium magneto-optical trap (MOT) for future Casimir-Polder experiments. This thesis will describe the strontium apparatus, initial trap performance, and some details of the proposed measurement procedure.
We review the current status of the field of atom-surface interactions, with an emphasis on the regimes specific to atom chips. Recent developments in theory and experiment are highlighted. In particular, atom-surface interactions define physical limits for miniaturization and coherent operation. This implies constraints for applications in quantum information processing or matter wave interferometry. We focus on atom-surface interaction potentials induced by vacuum fluctuations (Van der Waals and Casimir-Polder forces), and on transitions between atomic quantum states that are induced by thermally excited magnetic near fields. Open questions and current challenges are sketched.