Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Meissner qubit: architecture, characterization and vortex-probing applications

Jaseung Ku

Published Apr 20, 2016• 0 citations
OpenAlex

Abstract

Quantum computing has drawn enormous attention in physics community in both scientific and technological perspectives. Among several promising architectures for quantum computer are superconducting qubits based on Josephson junctions. Over the last few decades, there has been a dramatic improvement on the coherence time by a few orders of magnitude from a few nanoseconds to about a hundred microsecond. Such improvements were possible due to the elimination or suppression of various decoherence sources. Thus, it is critical to investigate the origin of such decoherence to extend our understanding and practically improve the coherence time. For example, Abrikosov vortices knowingly could be one of the decoherence source, and yet the quantitative research on the interaction of a superconducting qubit with such vortices has been lacking. We present a new type of transmon split-junction qubit which can be tuned by Meissner screening currents in the adjacent superconducting film electrodes. The qubits were measured using a 3D microwave cavity in the dispersive regime at the base temperature 45 mK. The measurement protocols were based on the circuit quantum electrodynamics (cQED) architecture and so-called high-power measurement. The achieved period of oscillation with magnetic field was much smaller than in usual SQUID-based transmon qubits, thus a strong effective field amplification has been realized. The best measured relaxation time was of the order of 50 μs and the dephasing time about 40 μs. This Meissner qubit allows an efficient coupling to superconducting vortices, which were induced by external applied magnetic field. We intend to present a quantitative analysis of the radiation-free energy relaxation in the qubits coupled to the Abrikosov vortices. The estimated relaxation rate combined with vortex counting process provided a good agreement with the experimental results. Also, the observation of coherent quantum oscillations provides strong evidence that vortices can exist in coherent quantum superposition of different position states. According to our suggested model, the wave function collapse is defined by Caldeira-Leggett dissipation associated with viscous motion of the vortex cores.

Related papers

Decoherence and radiation-free relaxation in Meissner transmon qubit coupled to Abrikosov vortices

Jaseung Ku, Zack Yoscovits, Alex Levchenko +2 more

We present a type of transmon split-junction qubit which can be tuned by Meissner screening currents flowing in the adjacent superconducting film electrodes. The best detected relaxation time $({T}_{1})$ was of the order of $50\ensuremath{\mu}\mathrm{s}$ and the dephasing time $({T}_{2})$ about $40\ensuremath{\mu}\mathrm{s}$. The achieved period of oscillation with magnetic field was much smaller than in the usual SQUID-based transmon qubits; thus a strong effective field amplification has been realized. This Meissner qubit allows a strong mixing of the current flowing in the qubit junctions and the currents generated by the Abrikosov vortices. We present a quantitative analysis of the radiation-free relaxation in qubits coupled to the Abrikosov vortices. The observation of coherent quantum oscillations provides strong evidence that the position of the vortex as well as its velocity do not have to accept exact values but can be smeared in the quantum mechanical sense. The eventual relaxation of such states contributes to an increased relaxation rate of the qubit coupled to vortices. Such relaxation is described using basic notions of the Caldeira-Leggett quantum dissipation theory.

arXiv:1504.03360•Physical review. B./Physical review. B•Oct 14, 2016•13 citations

Experiments on multi-level superconducting qubits and coaxial circuit QED

Michael Peterer

Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.

•Jan 1, 2016•1 citation

Characterizing superconducting qubits

Sofia Patomäki

In a quantum computer, the information carriers, which are bits in ordinary computers, are implemented as devices that exhibit coherent superpositions of physical states and entanglement. Such components, known as quantum bits or qubits, can be realized with various different types of two-state quantum systems. Quantum computers will be built for computational speed, with hoped for applications especially in cryptography and in other tasks where classical computers remain inefficient. Circuit quantum electrodynamics (cQED) is a quantum-computer architecture which employs superconducting electronic components and microwave photon fields as building blocks. Compared to cavity quantum electrodynamics (CQED), where atoms are trapped in physical cavities, cQED is more attractive in that its qubits are tunable and conveniently integrable with the electronics already in use. This architecture has shown some of the most promising qubit designs, despite their coherence times reaching tens of microseconds, are still below the state of the art with spin qubits, which reach milliseconds. Coherence times are historically the most relevant parameters describing the fitness of a qubit, although these days not necessarily the limiting factor. This thesis presents a comprehensive set of theoretical and experimental methods for measuring the characteristic parameters of superconducting qubits. We especially study transmission-line-shunted plasma oscillation qubits, or transmons, and presents experimental results for a single sample. Transmon capacitively couples a superconducting quantum interference device (SQUID) with a coplanar waveguide (CPW) resonator, often with added frequency tunability utilizing an external magnet. The number of superconducting charge carriers tunnelled through a junction in the SQUID are used as qubit degrees of freedom. Readout of the qubit state is carried out by measuring transmission through the CPW. A cryogenic setup is employed with measurement and driving pulses delivered from microwave sources. Steady-state spectroscopy is employed to determine the resonance frequencies of the qubit and the resonator, qubit-resonator coupling constants, and the energy parameters of the qubit. Pulse-modulated measurements are employed to determine the coherence times of the qubit. The related analysis- and simulation programs and scripts are collected togithub.com/patomaki.

Työväentutkimus Vuosikirja•Jan 1, 2017•0 citations

From Macroscopic Quantum Tunneling to Circuit QED: Coherence and Dissipation in 3D Transmon Qubits

Gustavo Moreto, Diego Molina, Saulo Gabriel Pereira Nascimento Alberton +9 more

Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an $$Al/AlO_x/Al$$ transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of $$\omega _{01}=5.0122~\textrm{GHz}$$ and an anharmonicity of $$\alpha /2\pi =-202.4~\textrm{MHz}$$ , corresponding to $$E_J/E_C \approx 82.9$$ . Flux spectroscopy yields a cavity-qubit coupling strength of $$g/2\pi = 260~\textrm{MHz}$$ , while the cavity linewidth gives a loaded quality factor of $$Q_L=6127$$ and a Purcell limit of $$T_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}$$ . Time-domain measurements yield coherence times of $$T_1 = 17.4~\mu \textrm{s}$$ and $$T_2^* = 5.8~\mu \textrm{s}$$ . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.

Brazilian Journal of Physics•Oct 23, 2026•0 citations

Millisecond charge-parity fluctuations and induced decoherence in a superconducting transmon qubit

Diego Ristè, Cornelis Christiaan Bultink, M. J. Tiggelman +3 more

The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.

arXiv:1212.5459•Nature Communications•May 28, 2013•268 citations

Circuit-QED-based measurement of vortex lattice order in a Josephson junction array

R. Cosmic, Hiroki Ikegami, Zhirong Lin +3 more

Superconductivity provides a canonical example of a quantum phase of matter. When superconducting islands are connected by Josephson junctions in a lattice, the low-temperature state of the system can map to the celebrated XY model and its associated universality classes. This has been used to experimentally implement realizations of Mott insulator and Berezinskii-Kosterlitz-Thouless transitions to vortex dynamics analogous to those in type-II superconductors. When an external magnetic field is added, the effective spins of the XY model become frustrated, leading to the formation of topological defects (vortices). Here, we observe the many-body dynamics of such an array, including frustration, via its coupling to a superconducting microwave cavity. We take the design of the transmon qubit, but replace the single junction between two antenna pads with the complete array. This allows us to probe the system at 10 mK with minimal self-heating by using weak coherent states at the single (microwave) photon level to probe the resonance frequency of the cavity. We observe signatures of an ordered vortex lattice at rational flux fillings of the array.

arXiv:1803.04113•Physical review. B./Physical review. B•Aug 21, 2018•10 citations
Quantum computing has drawn enormous attention in physics community in both scientific and technological perspectives. Among several promising architectures for quantum computer are superconducting qubits based on Josephson junctions. Over the last few decades, there has been a dramatic improvement on the coherence time by a few orders of magnitude from a few nanoseconds to about a hundred microsecond. Such improvements were possible due to the elimination or suppression of various decoherence sources. Thus, it is critical to investigate the origin of such decoherence to extend our understanding and practically improve the coherence time. For example, Abrikosov vortices knowingly could be one of the decoherence source, and yet the quantitative research on the interaction of a superconducting qubit with such vortices has been lacking. We present a new type of transmon split-junction qubit which can be tuned by Meissner screening currents in the adjacent superconducting film electrodes. The qubits were measured using a 3D microwave cavity in the dispersive regime at the base temperature 45 mK. The measurement protocols were based on the circuit quantum electrodynamics (cQED) architecture and so-called high-power measurement. The achieved period of oscillation with magnetic field was much smaller than in usual SQUID-based transmon qubits, thus a strong effective field amplification has been realized. The best measured relaxation time was of the order of 50 μs and the dephasing time about 40 μs. This Meissner qubit allows an efficient coupling to superconducting vortices, which were induced by external applied magnetic field. We intend to present a quantitative analysis of the radiation-free energy relaxation in the qubits coupled to the Abrikosov vortices. The estimated relaxation rate combined with vortex counting process provided a good agreement with the experimental results. Also, the observation of coherent quantum oscillations provides strong evidence that vortices can exist in coherent quantum superposition of different position states. According to our suggested model, the wave function collapse is defined by Caldeira-Leggett dissipation associated with viscous motion of the vortex cores.
We present a type of transmon split-junction qubit which can be tuned by Meissner screening currents flowing in the adjacent superconducting film electrodes. The best detected relaxation time (T1)({T}_{1})(T1​) was of the order of $50\ensuremath{\mu}\mathrm{s}$ and the dephasing time (T2)({T}_{2})(T2​) about $40\ensuremath{\mu}\mathrm{s}$. The achieved period of oscillation with magnetic field was much smaller than in the usual SQUID-based transmon qubits; thus a strong effective field amplification has been realized. This Meissner qubit allows a strong mixing of the current flowing in the qubit junctions and the currents generated by the Abrikosov vortices. We present a quantitative analysis of the radiation-free relaxation in qubits coupled to the Abrikosov vortices. The observation of coherent quantum oscillations provides strong evidence that the position of the vortex as well as its velocity do not have to accept exact values but can be smeared in the quantum mechanical sense. The eventual relaxation of such states contributes to an increased relaxation rate of the qubit coupled to vortices. Such relaxation is described using basic notions of the Caldeira-Leggett quantum dissipation theory.
Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.
In a quantum computer, the information carriers, which are bits in ordinary computers, are implemented as devices that exhibit coherent superpositions of physical states and entanglement. Such components, known as quantum bits or qubits, can be realized with various different types of two-state quantum systems. Quantum computers will be built for computational speed, with hoped for applications especially in cryptography and in other tasks where classical computers remain inefficient. Circuit quantum electrodynamics (cQED) is a quantum-computer architecture which employs superconducting electronic components and microwave photon fields as building blocks. Compared to cavity quantum electrodynamics (CQED), where atoms are trapped in physical cavities, cQED is more attractive in that its qubits are tunable and conveniently integrable with the electronics already in use. This architecture has shown some of the most promising qubit designs, despite their coherence times reaching tens of microseconds, are still below the state of the art with spin qubits, which reach milliseconds. Coherence times are historically the most relevant parameters describing the fitness of a qubit, although these days not necessarily the limiting factor. This thesis presents a comprehensive set of theoretical and experimental methods for measuring the characteristic parameters of superconducting qubits. We especially study transmission-line-shunted plasma oscillation qubits, or transmons, and presents experimental results for a single sample. Transmon capacitively couples a superconducting quantum interference device (SQUID) with a coplanar waveguide (CPW) resonator, often with added frequency tunability utilizing an external magnet. The number of superconducting charge carriers tunnelled through a junction in the SQUID are used as qubit degrees of freedom. Readout of the qubit state is carried out by measuring transmission through the CPW. A cryogenic setup is employed with measurement and driving pulses delivered from microwave sources. Steady-state spectroscopy is employed to determine the resonance frequencies of the qubit and the resonator, qubit-resonator coupling constants, and the energy parameters of the qubit. Pulse-modulated measurements are employed to determine the coherence times of the qubit. The related analysis- and simulation programs and scripts are collected togithub.com/patomaki.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an Al/AlOx/AlAl/AlO_x/AlAl/AlOx​/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of ω01=5.0122 GHz\omega _{01}=5.0122~\textrm{GHz}ω01​=5.0122 GHz and an anharmonicity of α/2π=−202.4 MHz\alpha /2\pi =-202.4~\textrm{MHz}α/2π=−202.4 MHz , corresponding to EJ/EC≈82.9E_J/E_C \approx 82.9EJ​/EC​≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of g/2π=260 MHzg/2\pi = 260~\textrm{MHz}g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of QL=6127Q_L=6127QL​=6127 and a Purcell limit of T1Purcell≈82 μsT_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}T1Purcell​≈82 μs . Time-domain measurements yield coherence times of T1=17.4 μsT_1 = 17.4~\mu \textrm{s}T1​=17.4 μs and T2∗=5.8 μsT_2^* = 5.8~\mu \textrm{s}T2∗​=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.
Superconductivity provides a canonical example of a quantum phase of matter. When superconducting islands are connected by Josephson junctions in a lattice, the low-temperature state of the system can map to the celebrated XY model and its associated universality classes. This has been used to experimentally implement realizations of Mott insulator and Berezinskii-Kosterlitz-Thouless transitions to vortex dynamics analogous to those in type-II superconductors. When an external magnetic field is added, the effective spins of the XY model become frustrated, leading to the formation of topological defects (vortices). Here, we observe the many-body dynamics of such an array, including frustration, via its coupling to a superconducting microwave cavity. We take the design of the transmon qubit, but replace the single junction between two antenna pads with the complete array. This allows us to probe the system at 10 mK with minimal self-heating by using weak coherent states at the single (microwave) photon level to probe the resonance frequency of the cavity. We observe signatures of an ordered vortex lattice at rational flux fillings of the array.