Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Latin-American Conference on Communications

Design and FPGA verification of a quasi-cyclic LDPC code for optical communication systems

Bergero Genaro, Damián A. Morero, Ariel L. Pola, Mario A. Castrillón, Mario R. Hueda

Published Nov 1, 2016• 1 citation
Publisher

Abstract

Powerful forward error correction codes such as quasi-cyclic low density parity check (QC-LDPC) are required in next-generation coherent optical communication systems [1]. This work describes the design and experimental verification of a high net coding gain (NCG), low complexity QC-LDPC code. Towards this end, we develop a field programmable gate array (FPGA) based platform specially designed for optimization and performance evaluation of LDPC codes. The proposed FPGA framework includes several features such as the capability of changing the internal resolution of the decoder algorithm or capturing error patterns for error-floor analysis. Experimental results derived from the FPGA platform show that the designed QC-LDPC code is able to achieve an NCG of 11.6 dB at a bit-error-rate (BER) of 10-15with an overhead of 25% and a codeword length of only 16K bits.

DOI
10.1109/latincom.2016.7811566

Related papers

FPGA implementation of high-performance QC-LDPC decoder for optical communications

Ding Zou, Ivan B. Djordjević

Forward error correction is as one of the key technologies enabling the next-generation high-speed fiber optical communications. Quasi-cyclic (QC) low-density parity-check (LDPC) codes have been considered as one of the promising candidates due to their large coding gain performance and low implementation complexity. In this paper, we present our designed QC-LDPC code with girth 10 and 25% overhead based on pairwise balanced design. By FPGAbased emulation, we demonstrate that the 5-bit soft-decision LDPC decoder can achieve 11.8dB net coding gain with no error floor at BER of 10-15 avoiding using any outer code or post-processing method. We believe that the proposed single QC-LDPC code is a promising solution for 400Gb/s optical communication systems and beyond.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 7, 2015•6 citations

A layered QC-LDPC decoder architecture for high speed communication system

Chiu‐Wing Sham, Xu Chen, Wai M. Tam +2 more

The performance of a high-throughput long-distance communication system such as an optical transmission system is limited by the Net Coding Gain (NCG) of the Forward Error Correction (FEC) system. Summarizing the previous research works, Low-Density Parity-Check (LDPC) codes form one of the most promising FEC schemes to be applied in high-throughput communication systems. Designing a practical channel coding scheme with high code rate, low complexity, high throughput and extremely low error floor has always been a very challenging problem. Quasi-cyclic low-density parity-check (QC-LDPC) codes have been promising candidates to fulfill the above requirements but the implementation issues remain. In this paper, we propose a layered QC-LDPC decoder architecture with high code rate, low complexity, high throughput and excellent error performance. The architecture has been implemented using FPGA and the error performance has been shown to be good.

IEEE Asia Pacific Conference on Circuits and Systems (APCCAS)•Dec 1, 2012•35 citations

Construction Method of QC-LDPC Codes in Optical Communication Systems

Yong Wang

To meet the increasing requirement on the transmission characteristics of optical communication systems,based on the structure of parity-check matrix of Richardson-Urbanke algorithm,a lowercomplexity constructing method is proposed for the quasi-cyclic low-density parity-check(QC-LDPC) codes in the optical communication systems,and a QC-LDPC(4288,4020) code with 93.7% higher code-rate is also constructed.Simulation shows that the constructed QC-LDPC(4288,4020) code has net coding gain of about 1.7 dB over the classic RS(255,239) code which has been widely used for optical communication systems and 0.3 dB more than that of SCG-LDPC(3969,3720) code with the same 93.7% higher code-rate,and the NCG of the QC-LDPC(4288,4020) code is about 1.3 dB away from the Shannon limit at bit error rate BER of 10-7;furthermore,the error floor of QC-LDPC(4288,4020) code is lower than that of the randomly constructed LDPC(4288,4020) with the column weight of 3.

Beijing Youdian Xueyuan xuebao•Jan 1, 2013•0 citations

LDPC Codes Derived from Quasi-cyclic Code Design Suitable for Optical Communications

Xiaole Sun, Ivan B. Djordjević

We propose a rate-adaptive forward error correction (FEC) scheme based on spatially-coupled (SC) LDPC codes derived from quasi-cyclic (QC) LDPC codes with its field-programmable gate array (FPGA) architecture. By FPGA emulation, we show that, with comparable computational complexity, the proposed LDPC codes provide larger coding gain and smaller error floor compare to the QC-LDPC base code. As a result, due to its hardware friendly structure, they are presented to be a promising candidate for the next-generation intelligent optical communication systems such as long-haul optical transmission system.

International Conference on Transparent Optical Networks•Jul 1, 2018•3 citations

A novel construction method of the QC-LDPC code based on finite field additive group for optical communications

Yong Wang

Based on finite field(GF(q)) additive group,a novel construction method with the advantages of simple construction and easy implementation of quasi-cyclic low-density parity-check(QC-LDPC) codes for optical communication systems is proposed in order to meet the increasing requirement on the transmission characteristics.The novel construction method can flexibly adjust the code-length and code-rate,and furthermore,the complexity of the encoding and decoding in lower.A regular QC-LDPC(4599,4307) code to be suitable for optical communication systems is constructed by applying the proposed method.The simulation results show that at the condition of the bit error rate(BER) of 10-7 and the same code rate of 93.7%,the net coding gain(NCG) of the constructed QC-LDPC(4599,4307) code is 2.2 dB more than that of the classic RS(255,239) code which has widely been applied in optical communication systems,and 0.47 dB and 0.25 dB more than those of the SCG-LDPC(3969,3720) code constructed by the systematically constructed gallager(SCG) construction method and the irregular QC-LDPC(3843,3603) code respectively,and is 1 dB away from the Shannon limit.Therefore,the novel QC-LDPC(4599,4307) code has superior error-correction performance and is more suitable for the high-speed long-haul optical communication systems.

Journal of Optoelectronics·laser•Jan 1, 2013•0 citations

Study on QC-LDPC Codes Based on BIBD for Optical Communication Systems

Yong Wang

Based on the Balanced Incomplete Block Design(BIBD),a novel construction method of Quasi-Cyclic Low-Density Parity-Check(QC-LDPC) codes is further analyzed and researched.And the three QC-LDPC codes with the same code-rate and different code-length are constructed by applying the proposed method.The simulation analysis shows that under the condition of the same code-rate,the QC-LDPC code with the longer code-length has better error-correction performance.Simultaneously,at the condition of the bit error rate(BER) of 10-6 and the same code rate of 93.7%,the net coding gain(NCG) of the constructed BIBD-QC-LDPC(5392,5056) code is respectively 2.13 dB and 1.41 dB higher than that of the classic RS(255,239) code widely used in optical communication systems and that of the LDPC(32640,30592) code in ITU-T G.975.1.Therefore,the BIBD-QC-LDPC(5392,5056) code has much superior error-correction performance and is better suitable for high-speed long-haul optical communication systems.

Bandaoti guangdian•Jan 1, 2013•0 citations
Powerful forward error correction codes such as quasi-cyclic low density parity check (QC-LDPC) are required in next-generation coherent optical communication systems [1]. This work describes the design and experimental verification of a high net coding gain (NCG), low complexity QC-LDPC code. Towards this end, we develop a field programmable gate array (FPGA) based platform specially designed for optimization and performance evaluation of LDPC codes. The proposed FPGA framework includes several features such as the capability of changing the internal resolution of the decoder algorithm or capturing error patterns for error-floor analysis. Experimental results derived from the FPGA platform show that the designed QC-LDPC code is able to achieve an NCG of 11.6 dB at a bit-error-rate (BER) of 10-15with an overhead of 25% and a codeword length of only 16K bits.
Forward error correction is as one of the key technologies enabling the next-generation high-speed fiber optical communications. Quasi-cyclic (QC) low-density parity-check (LDPC) codes have been considered as one of the promising candidates due to their large coding gain performance and low implementation complexity. In this paper, we present our designed QC-LDPC code with girth 10 and 25% overhead based on pairwise balanced design. By FPGAbased emulation, we demonstrate that the 5-bit soft-decision LDPC decoder can achieve 11.8dB net coding gain with no error floor at BER of 10-15 avoiding using any outer code or post-processing method. We believe that the proposed single QC-LDPC code is a promising solution for 400Gb/s optical communication systems and beyond.
The performance of a high-throughput long-distance communication system such as an optical transmission system is limited by the Net Coding Gain (NCG) of the Forward Error Correction (FEC) system. Summarizing the previous research works, Low-Density Parity-Check (LDPC) codes form one of the most promising FEC schemes to be applied in high-throughput communication systems. Designing a practical channel coding scheme with high code rate, low complexity, high throughput and extremely low error floor has always been a very challenging problem. Quasi-cyclic low-density parity-check (QC-LDPC) codes have been promising candidates to fulfill the above requirements but the implementation issues remain. In this paper, we propose a layered QC-LDPC decoder architecture with high code rate, low complexity, high throughput and excellent error performance. The architecture has been implemented using FPGA and the error performance has been shown to be good.
To meet the increasing requirement on the transmission characteristics of optical communication systems,based on the structure of parity-check matrix of Richardson-Urbanke algorithm,a lowercomplexity constructing method is proposed for the quasi-cyclic low-density parity-check(QC-LDPC) codes in the optical communication systems,and a QC-LDPC(4288,4020) code with 93.7% higher code-rate is also constructed.Simulation shows that the constructed QC-LDPC(4288,4020) code has net coding gain of about 1.7 dB over the classic RS(255,239) code which has been widely used for optical communication systems and 0.3 dB more than that of SCG-LDPC(3969,3720) code with the same 93.7% higher code-rate,and the NCG of the QC-LDPC(4288,4020) code is about 1.3 dB away from the Shannon limit at bit error rate BER of 10-7;furthermore,the error floor of QC-LDPC(4288,4020) code is lower than that of the randomly constructed LDPC(4288,4020) with the column weight of 3.
We propose a rate-adaptive forward error correction (FEC) scheme based on spatially-coupled (SC) LDPC codes derived from quasi-cyclic (QC) LDPC codes with its field-programmable gate array (FPGA) architecture. By FPGA emulation, we show that, with comparable computational complexity, the proposed LDPC codes provide larger coding gain and smaller error floor compare to the QC-LDPC base code. As a result, due to its hardware friendly structure, they are presented to be a promising candidate for the next-generation intelligent optical communication systems such as long-haul optical transmission system.
Based on finite field(GF(q)) additive group,a novel construction method with the advantages of simple construction and easy implementation of quasi-cyclic low-density parity-check(QC-LDPC) codes for optical communication systems is proposed in order to meet the increasing requirement on the transmission characteristics.The novel construction method can flexibly adjust the code-length and code-rate,and furthermore,the complexity of the encoding and decoding in lower.A regular QC-LDPC(4599,4307) code to be suitable for optical communication systems is constructed by applying the proposed method.The simulation results show that at the condition of the bit error rate(BER) of 10-7 and the same code rate of 93.7%,the net coding gain(NCG) of the constructed QC-LDPC(4599,4307) code is 2.2 dB more than that of the classic RS(255,239) code which has widely been applied in optical communication systems,and 0.47 dB and 0.25 dB more than those of the SCG-LDPC(3969,3720) code constructed by the systematically constructed gallager(SCG) construction method and the irregular QC-LDPC(3843,3603) code respectively,and is 1 dB away from the Shannon limit.Therefore,the novel QC-LDPC(4599,4307) code has superior error-correction performance and is more suitable for the high-speed long-haul optical communication systems.
Based on the Balanced Incomplete Block Design(BIBD),a novel construction method of Quasi-Cyclic Low-Density Parity-Check(QC-LDPC) codes is further analyzed and researched.And the three QC-LDPC codes with the same code-rate and different code-length are constructed by applying the proposed method.The simulation analysis shows that under the condition of the same code-rate,the QC-LDPC code with the longer code-length has better error-correction performance.Simultaneously,at the condition of the bit error rate(BER) of 10-6 and the same code rate of 93.7%,the net coding gain(NCG) of the constructed BIBD-QC-LDPC(5392,5056) code is respectively 2.13 dB and 1.41 dB higher than that of the classic RS(255,239) code widely used in optical communication systems and that of the LDPC(32640,30592) code in ITU-T G.975.1.Therefore,the BIBD-QC-LDPC(5392,5056) code has much superior error-correction performance and is better suitable for high-speed long-haul optical communication systems.