Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

FPGA implementation of high-performance QC-LDPC decoder for optical communications

Ding Zou, Ivan B. Djordjević

Published Feb 7, 2015• 6 citations
Publisher

Abstract

Forward error correction is as one of the key technologies enabling the next-generation high-speed fiber optical communications. Quasi-cyclic (QC) low-density parity-check (LDPC) codes have been considered as one of the promising candidates due to their large coding gain performance and low implementation complexity. In this paper, we present our designed QC-LDPC code with girth 10 and 25% overhead based on pairwise balanced design. By FPGAbased emulation, we demonstrate that the 5-bit soft-decision LDPC decoder can achieve 11.8dB net coding gain with no error floor at BER of 10-15 avoiding using any outer code or post-processing method. We believe that the proposed single QC-LDPC code is a promising solution for 400Gb/s optical communication systems and beyond.

DOI
10.1117/12.2080735

Related papers

Design and FPGA verification of a quasi-cyclic LDPC code for optical communication systems

Bergero Genaro, Damián A. Morero, Ariel L. Pola +2 more

Powerful forward error correction codes such as quasi-cyclic low density parity check (QC-LDPC) are required in next-generation coherent optical communication systems [1]. This work describes the design and experimental verification of a high net coding gain (NCG), low complexity QC-LDPC code. Towards this end, we develop a field programmable gate array (FPGA) based platform specially designed for optimization and performance evaluation of LDPC codes. The proposed FPGA framework includes several features such as the capability of changing the internal resolution of the decoder algorithm or capturing error patterns for error-floor analysis. Experimental results derived from the FPGA platform show that the designed QC-LDPC code is able to achieve an NCG of 11.6 dB at a bit-error-rate (BER) of 10-15with an overhead of 25% and a codeword length of only 16K bits.

IEEE Latin-American Conference on Communications•Nov 1, 2016•1 citation

A layered QC-LDPC decoder architecture for high speed communication system

Chiu‐Wing Sham, Xu Chen, Wai M. Tam +2 more

The performance of a high-throughput long-distance communication system such as an optical transmission system is limited by the Net Coding Gain (NCG) of the Forward Error Correction (FEC) system. Summarizing the previous research works, Low-Density Parity-Check (LDPC) codes form one of the most promising FEC schemes to be applied in high-throughput communication systems. Designing a practical channel coding scheme with high code rate, low complexity, high throughput and extremely low error floor has always been a very challenging problem. Quasi-cyclic low-density parity-check (QC-LDPC) codes have been promising candidates to fulfill the above requirements but the implementation issues remain. In this paper, we propose a layered QC-LDPC decoder architecture with high code rate, low complexity, high throughput and excellent error performance. The architecture has been implemented using FPGA and the error performance has been shown to be good.

IEEE Asia Pacific Conference on Circuits and Systems (APCCAS)•Dec 1, 2012•35 citations

LDPC Codes Derived from Quasi-cyclic Code Design Suitable for Optical Communications

Xiaole Sun, Ivan B. Djordjević

We propose a rate-adaptive forward error correction (FEC) scheme based on spatially-coupled (SC) LDPC codes derived from quasi-cyclic (QC) LDPC codes with its field-programmable gate array (FPGA) architecture. By FPGA emulation, we show that, with comparable computational complexity, the proposed LDPC codes provide larger coding gain and smaller error floor compare to the QC-LDPC base code. As a result, due to its hardware friendly structure, they are presented to be a promising candidate for the next-generation intelligent optical communication systems such as long-haul optical transmission system.

International Conference on Transparent Optical Networks•Jul 1, 2018•3 citations

Performance Analysis of NB-QC-LDPC Code for High-Speed Optical Communication Systems

Zhiqiang Lin, Jianyong Zhang

In the paper, we construct the non-binary quasi-cyclic low-density parity check (NB-QC-LDPC) code from the quasi-cyclic low-density parity check (QC-LDPC) code. The NB-QC-LDPC code over the Galois field GF(4) is suitable for 100Gb/s optical communication systems with QPSK or DQPSK modulation formats. We also study the bit error ratio (BER) performance of the NB-QC-LDPC code by using the Log-Fourier Sum and Product decoding algorithm (LFSPA). The numerical results show that the NB-QC-LDPC code with code length 500 can provide approximately 5.5dB coding gain at the BER of 910- and outperform QC-LDPC code by 0.7dB.

International Conference on Electronics, Communications and Control•Oct 16, 2012•0 citations

A 3.0 Gb/s Throughput Hardware-Efficient Decoder for Cyclically-Coupled QC-LDPC Codes

Qing Hua Lu, Jianfeng Fan, Chiu‐Wing Sham +2 more

In this paper, we propose a new class of quasi-cyclic low-density parity-check (QC-LDPC) codes, namely cyclically-coupled QC-LDPC (CC-QC-LDPC) codes, and their RAM-based decoder architecture. CC-QC-LDPC codes have a simple structure and are constructed by cyclically-coupling a number of QC-LDPC subcodes. They can achieve throughput and error performance as excellent as LDPC convolutional codes, but with much lower hardware requirements. They are therefore promising candidates for future generations of communication systems such as long-haul optical communication systems. In particular, a rate-5/6 CC-QC-LDPC decoder has been implemented onto a field-programmable gate array (FPGA) and it achieves a throughput of 3.0 Gb/s at 100 MHz clock rate with 10-iteration decoding. No error floor is observed up to an$E_{b}/N_{0}$of 3.50 dB, where all$1.14\times 10^{16}$transmitted bits have been decoded correctly.

IEEE Transactions on Circuits and Systems I Regular Papers•Jan 1, 2016•34 citations

Study on QC-LDPC Codes Based on BIBD for Optical Communication Systems

Yong Wang

Based on the Balanced Incomplete Block Design(BIBD),a novel construction method of Quasi-Cyclic Low-Density Parity-Check(QC-LDPC) codes is further analyzed and researched.And the three QC-LDPC codes with the same code-rate and different code-length are constructed by applying the proposed method.The simulation analysis shows that under the condition of the same code-rate,the QC-LDPC code with the longer code-length has better error-correction performance.Simultaneously,at the condition of the bit error rate(BER) of 10-6 and the same code rate of 93.7%,the net coding gain(NCG) of the constructed BIBD-QC-LDPC(5392,5056) code is respectively 2.13 dB and 1.41 dB higher than that of the classic RS(255,239) code widely used in optical communication systems and that of the LDPC(32640,30592) code in ITU-T G.975.1.Therefore,the BIBD-QC-LDPC(5392,5056) code has much superior error-correction performance and is better suitable for high-speed long-haul optical communication systems.

Bandaoti guangdian•Jan 1, 2013•0 citations
Forward error correction is as one of the key technologies enabling the next-generation high-speed fiber optical communications. Quasi-cyclic (QC) low-density parity-check (LDPC) codes have been considered as one of the promising candidates due to their large coding gain performance and low implementation complexity. In this paper, we present our designed QC-LDPC code with girth 10 and 25% overhead based on pairwise balanced design. By FPGAbased emulation, we demonstrate that the 5-bit soft-decision LDPC decoder can achieve 11.8dB net coding gain with no error floor at BER of 10-15 avoiding using any outer code or post-processing method. We believe that the proposed single QC-LDPC code is a promising solution for 400Gb/s optical communication systems and beyond.
Powerful forward error correction codes such as quasi-cyclic low density parity check (QC-LDPC) are required in next-generation coherent optical communication systems [1]. This work describes the design and experimental verification of a high net coding gain (NCG), low complexity QC-LDPC code. Towards this end, we develop a field programmable gate array (FPGA) based platform specially designed for optimization and performance evaluation of LDPC codes. The proposed FPGA framework includes several features such as the capability of changing the internal resolution of the decoder algorithm or capturing error patterns for error-floor analysis. Experimental results derived from the FPGA platform show that the designed QC-LDPC code is able to achieve an NCG of 11.6 dB at a bit-error-rate (BER) of 10-15with an overhead of 25% and a codeword length of only 16K bits.
The performance of a high-throughput long-distance communication system such as an optical transmission system is limited by the Net Coding Gain (NCG) of the Forward Error Correction (FEC) system. Summarizing the previous research works, Low-Density Parity-Check (LDPC) codes form one of the most promising FEC schemes to be applied in high-throughput communication systems. Designing a practical channel coding scheme with high code rate, low complexity, high throughput and extremely low error floor has always been a very challenging problem. Quasi-cyclic low-density parity-check (QC-LDPC) codes have been promising candidates to fulfill the above requirements but the implementation issues remain. In this paper, we propose a layered QC-LDPC decoder architecture with high code rate, low complexity, high throughput and excellent error performance. The architecture has been implemented using FPGA and the error performance has been shown to be good.
We propose a rate-adaptive forward error correction (FEC) scheme based on spatially-coupled (SC) LDPC codes derived from quasi-cyclic (QC) LDPC codes with its field-programmable gate array (FPGA) architecture. By FPGA emulation, we show that, with comparable computational complexity, the proposed LDPC codes provide larger coding gain and smaller error floor compare to the QC-LDPC base code. As a result, due to its hardware friendly structure, they are presented to be a promising candidate for the next-generation intelligent optical communication systems such as long-haul optical transmission system.
In the paper, we construct the non-binary quasi-cyclic low-density parity check (NB-QC-LDPC) code from the quasi-cyclic low-density parity check (QC-LDPC) code. The NB-QC-LDPC code over the Galois field GF(4) is suitable for 100Gb/s optical communication systems with QPSK or DQPSK modulation formats. We also study the bit error ratio (BER) performance of the NB-QC-LDPC code by using the Log-Fourier Sum and Product decoding algorithm (LFSPA). The numerical results show that the NB-QC-LDPC code with code length 500 can provide approximately 5.5dB coding gain at the BER of 910- and outperform QC-LDPC code by 0.7dB.
In this paper, we propose a new class of quasi-cyclic low-density parity-check (QC-LDPC) codes, namely cyclically-coupled QC-LDPC (CC-QC-LDPC) codes, and their RAM-based decoder architecture. CC-QC-LDPC codes have a simple structure and are constructed by cyclically-coupling a number of QC-LDPC subcodes. They can achieve throughput and error performance as excellent as LDPC convolutional codes, but with much lower hardware requirements. They are therefore promising candidates for future generations of communication systems such as long-haul optical communication systems. In particular, a rate-5/6 CC-QC-LDPC decoder has been implemented onto a field-programmable gate array (FPGA) and it achieves a throughput of 3.0 Gb/s at 100 MHz clock rate with 10-iteration decoding. No error floor is observed up to anEb/N0E_{b}/N_{0}Eb​/N0​of 3.50 dB, where all1.14×10161.14\times 10^{16}1.14×1016transmitted bits have been decoded correctly.
Based on the Balanced Incomplete Block Design(BIBD),a novel construction method of Quasi-Cyclic Low-Density Parity-Check(QC-LDPC) codes is further analyzed and researched.And the three QC-LDPC codes with the same code-rate and different code-length are constructed by applying the proposed method.The simulation analysis shows that under the condition of the same code-rate,the QC-LDPC code with the longer code-length has better error-correction performance.Simultaneously,at the condition of the bit error rate(BER) of 10-6 and the same code rate of 93.7%,the net coding gain(NCG) of the constructed BIBD-QC-LDPC(5392,5056) code is respectively 2.13 dB and 1.41 dB higher than that of the classic RS(255,239) code widely used in optical communication systems and that of the LDPC(32640,30592) code in ITU-T G.975.1.Therefore,the BIBD-QC-LDPC(5392,5056) code has much superior error-correction performance and is better suitable for high-speed long-haul optical communication systems.