Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

On an Instrument for the Coherent Investigation of Nitrogen-Vacancy Centres in Diamond

Om Patange

Published Sep 27, 2013• 4 citations
OpenAlex

Abstract

It is my hope that this thesis may serve as a guide for future students wishing to build a microscope from scratch. The design and construction of a scanning, confocal fluorescence microscope equipped with shaped microwave excitation is detailed. The use of the microscope is demonstrated by coherently manipulating single Nitrogen-Vacancy centres in diamond. Further the instrument is used to investigate a dual Halbach array magnet system.

Related papers

Setup of a Confocal Fluorescence Microscope for the Detection and Characterization of Single NV Centers in Diamond

Manuel Riedmann, Lucas Kirchbach, Andreas Stute

Single nitrogen vacancy (NV) centers in diamond serve as a photonic platform for quantum sensing and computing applications. They can be created deterministically using femtosecond laser pulses. Such writing process requires high-resolution fluorescence detection with a high signal-to-noise ratio, which is accomplished by setting up a homebuilt confocal fluorescence microscope. The microscope shall monitor the fluorescence of newly formed NV centers during the writing process. In addition, it will be used to characterize the NV centers’ spin coherence times, orientation in the diamond lattice and single-emitter characteristics via the intensity correlation function g(2)(tau). In the future, this setup is also planned to be employed for STED-microscopy of twin NV centers.

•Feb 5, 2026•0 citations

Harnessing individual nitrogen-vacancy centers with a compact and portable confocal microscope

Iván Muñoz, José Carlos Guerra Copete, Eva Caravaca Crespo +4 more

Abstract Recent advancements in quantum technology have highlighted the potential of nitrogen-vacancy (NV) centers in diamond. However, fully realizing this potential requires addressing challenges related to the size, complexity, and cost of current optical systems used for NV center manipulation. In this work, we present a compact and portable confocal setup specifically designed for the efficient detection and control of single NV centers. Our system facilitates optical initialization and readout of individual NV center photoluminescence signals, enabling coherent spin control and nanoscale-resolution magnetic field sensing.

Europhysics Letters (EPL)•Jan 13, 2025•1 citation

Optical and spin properties of nitrogen vacancy centers in bulk and nanocrystalline diamond

Benjamin K. Ofori-Okai

The NV center is becoming a very hot topic in many areas of science, including, Physics, Chemistry, Biology, and Quantum Information. The Degen group has focused on a specific application of the NV center, namely scanning magnetometry. In my time in the group, I focused on building a microscope and studying NV centers in bulk and nanocrystalline diamond. I began by building a confocal microscope which was capable of observing and determine single NV centers. I made measurements on the photon statistics of different defects to determine if they were single emitters or multiple emitters. I also made microwave frequency magnetic measurements to determine the spin properties of single NV centers by measuring their couplings to neighboring paramagnetic nuclei as well as to a spin bath. Through these efforts, I was able to successfully confirm that the microscope was capable of identifying and measuring single NV centers and their properties. Lastly, I worked on the first steps of improving our understanding of NV centers in bulk diamond crystals. The goal of magnetometry involves putting the NV center as close to the diamond surface as possible. I made measurements that were aimed at studying the spin and coherence properties of the NV when it was within 10 nm of the diamond surface. These studies provided insight into the interactions of the NV center with the diamond surface.

•Jan 1, 2013•0 citations

Harnessing individual nitrogen-vacancy centers with a compact and portable confocal microscope

I. Panadero, José Carlos Guerra Copete, E. Caravaca +4 more

Abstract Recent advancements in quantum technology have highlighted the potential of nitrogen-vacancy (NV) centers in diamond. However, realizing this potential requires overcoming challenges associated with the size, complexity, and cost of current optical systems. In this Perspective, we present a compact and portable confocal setup designed for efficient detection, initialization, and readout of single NV center photoluminescence signals, enabling coherent spin control and nanoscale-resolution magnetic field sensing.

arXiv:2410.04942•Europhysics Letters (EPL)•Jan 17, 2025•1 citation

Nanoscale quantum sensing using nitrogen-vacancy centres in diamond

Liam Paul McGuinness

Devices that detect and spatially image magnetic fields are important in many areas of study including chemistry, electronics, materials science and biology. By extending the boundaries of what is currently achievable we may begin to explore areas previously inaccessible to science, such as wide-field imaging of neuron signaling or structural determination of single molecules. Here we present experimental progress towards the development of a nanoscale magnetic sensor operating under ambient conditions using the nitrogen-vacancy (NV) centre in diamond. This thesis describes the construction of a lab-built, confocal microscope capable of detecting single NV centres, with additional microwave control for coherent manipulation of the NV spin. The feasibility of using NV-diamond for real-time detection of the action potential generated by a neuron, and with high spatial resolution is experimentally demonstrated. The quantum coherence of single NV spins is monitored in various chemical solutions, and detection of nanoscale magnetic environments external to the diamond are demonstrated. This work sets the experimental foundation for using manufactured single quantum systems as sensitive probes of external chemical environments. In addition, the first measurements of single quantum coherent spins inside living cells are performed with NV centres in nanodiamonds. These studies on NV centres inside living cells demonstrate their promise as magnetic sensors for biology. Furthermore, alternative quantum sensing technologies emerge including rotational tracking of nanodiamonds and enhanced identification of fluorescent nanoparticles.

•Jan 1, 2012•0 citations

Robust coherent optimal control of nitrogen-vacancy quantum bits in diamond

Andreas Angerer

During the last ten years, basic quantum operations on a single electronic spins in the nitrogen-vacancy defect center in diamond have been a rich field of study. Quantum operations coherently manipulating the spin of the nitrogen-vacancy center have become promising candidates for easy to manipulate qubits. However in order to implement these qubits in quantum computers robust high-fidelity control is needed. Building on an existing confocal microscopy setup, pulsed and quadrature-amplitude modulated microwave signals were used to realize coherent spin manipulation measurements. Especially designed Smooth Optimal Control pulses (robust against detuning and different control amplitudes) were used to develop measurement schemes resulting in the aforementioned increase of fidelity. The first part of the thesis describes the implementation of these pulses into the existing experimental setup and the calibration work necessary prior to measurements, due to imperfections of devices in the microwave chain. The second part is dedicated to the analysis of the pulses applied to a single spin by comparing the experimental results to theoretical simulations. This was done not only for one resonant spin with accurate control amplitude, but also for a range of different detunings and amplitudes. A more thorough analysis of the pulses was then achieved by using state/process tomography, resulting in a complete description of the process induced by these optimized pulses. Finally, after verifying the effect of the pulses, measurement schemes for sensing alternating magnetic fields were implemented, resulting in measurements with improved sensitivity for magnetic fields.

•Mar 1, 2014•1 citation
It is my hope that this thesis may serve as a guide for future students wishing to build a microscope from scratch. The design and construction of a scanning, confocal fluorescence microscope equipped with shaped microwave excitation is detailed. The use of the microscope is demonstrated by coherently manipulating single Nitrogen-Vacancy centres in diamond. Further the instrument is used to investigate a dual Halbach array magnet system.
Single nitrogen vacancy (NV) centers in diamond serve as a photonic platform for quantum sensing and computing applications. They can be created deterministically using femtosecond laser pulses. Such writing process requires high-resolution fluorescence detection with a high signal-to-noise ratio, which is accomplished by setting up a homebuilt confocal fluorescence microscope. The microscope shall monitor the fluorescence of newly formed NV centers during the writing process. In addition, it will be used to characterize the NV centers’ spin coherence times, orientation in the diamond lattice and single-emitter characteristics via the intensity correlation function g(2)(tau). In the future, this setup is also planned to be employed for STED-microscopy of twin NV centers.
Abstract Recent advancements in quantum technology have highlighted the potential of nitrogen-vacancy (NV) centers in diamond. However, fully realizing this potential requires addressing challenges related to the size, complexity, and cost of current optical systems used for NV center manipulation. In this work, we present a compact and portable confocal setup specifically designed for the efficient detection and control of single NV centers. Our system facilitates optical initialization and readout of individual NV center photoluminescence signals, enabling coherent spin control and nanoscale-resolution magnetic field sensing.
The NV center is becoming a very hot topic in many areas of science, including, Physics, Chemistry, Biology, and Quantum Information. The Degen group has focused on a specific application of the NV center, namely scanning magnetometry. In my time in the group, I focused on building a microscope and studying NV centers in bulk and nanocrystalline diamond. I began by building a confocal microscope which was capable of observing and determine single NV centers. I made measurements on the photon statistics of different defects to determine if they were single emitters or multiple emitters. I also made microwave frequency magnetic measurements to determine the spin properties of single NV centers by measuring their couplings to neighboring paramagnetic nuclei as well as to a spin bath. Through these efforts, I was able to successfully confirm that the microscope was capable of identifying and measuring single NV centers and their properties. Lastly, I worked on the first steps of improving our understanding of NV centers in bulk diamond crystals. The goal of magnetometry involves putting the NV center as close to the diamond surface as possible. I made measurements that were aimed at studying the spin and coherence properties of the NV when it was within 10 nm of the diamond surface. These studies provided insight into the interactions of the NV center with the diamond surface.
Abstract Recent advancements in quantum technology have highlighted the potential of nitrogen-vacancy (NV) centers in diamond. However, realizing this potential requires overcoming challenges associated with the size, complexity, and cost of current optical systems. In this Perspective, we present a compact and portable confocal setup designed for efficient detection, initialization, and readout of single NV center photoluminescence signals, enabling coherent spin control and nanoscale-resolution magnetic field sensing.
Devices that detect and spatially image magnetic fields are important in many areas of study including chemistry, electronics, materials science and biology. By extending the boundaries of what is currently achievable we may begin to explore areas previously inaccessible to science, such as wide-field imaging of neuron signaling or structural determination of single molecules. Here we present experimental progress towards the development of a nanoscale magnetic sensor operating under ambient conditions using the nitrogen-vacancy (NV) centre in diamond. This thesis describes the construction of a lab-built, confocal microscope capable of detecting single NV centres, with additional microwave control for coherent manipulation of the NV spin. The feasibility of using NV-diamond for real-time detection of the action potential generated by a neuron, and with high spatial resolution is experimentally demonstrated. The quantum coherence of single NV spins is monitored in various chemical solutions, and detection of nanoscale magnetic environments external to the diamond are demonstrated. This work sets the experimental foundation for using manufactured single quantum systems as sensitive probes of external chemical environments. In addition, the first measurements of single quantum coherent spins inside living cells are performed with NV centres in nanodiamonds. These studies on NV centres inside living cells demonstrate their promise as magnetic sensors for biology. Furthermore, alternative quantum sensing technologies emerge including rotational tracking of nanodiamonds and enhanced identification of fluorescent nanoparticles.
During the last ten years, basic quantum operations on a single electronic spins in the nitrogen-vacancy defect center in diamond have been a rich field of study. Quantum operations coherently manipulating the spin of the nitrogen-vacancy center have become promising candidates for easy to manipulate qubits. However in order to implement these qubits in quantum computers robust high-fidelity control is needed. Building on an existing confocal microscopy setup, pulsed and quadrature-amplitude modulated microwave signals were used to realize coherent spin manipulation measurements. Especially designed Smooth Optimal Control pulses (robust against detuning and different control amplitudes) were used to develop measurement schemes resulting in the aforementioned increase of fidelity. The first part of the thesis describes the implementation of these pulses into the existing experimental setup and the calibration work necessary prior to measurements, due to imperfections of devices in the microwave chain. The second part is dedicated to the analysis of the pulses applied to a single spin by comparing the experimental results to theoretical simulations. This was done not only for one resonant spin with accurate control amplitude, but also for a range of different detunings and amplitudes. A more thorough analysis of the pulses was then achieved by using state/process tomography, resulting in a complete description of the process induced by these optimized pulses. Finally, after verifying the effect of the pulses, measurement schemes for sensing alternating magnetic fields were implemented, resulting in measurements with improved sensitivity for magnetic fields.