The NV center is becoming a very hot topic in many areas of science, including, Physics, Chemistry, Biology, and Quantum Information. The Degen group has focused on a specific application of the NV center, namely scanning magnetometry. In my time in the group, I focused on building a microscope and studying NV centers in bulk and nanocrystalline diamond. I began by building a confocal microscope which was capable of observing and determine single NV centers. I made measurements on the photon statistics of different defects to determine if they were single emitters or multiple emitters. I also made microwave frequency magnetic measurements to determine the spin properties of single NV centers by measuring their couplings to neighboring paramagnetic nuclei as well as to a spin bath. Through these efforts, I was able to successfully confirm that the microscope was capable of identifying and measuring single NV centers and their properties. Lastly, I worked on the first steps of improving our understanding of NV centers in bulk diamond crystals. The goal of magnetometry involves putting the NV center as close to the diamond surface as possible. I made measurements that were aimed at studying the spin and coherence properties of the NV when it was within 10 nm of the diamond surface. These studies provided insight into the interactions of the NV center with the diamond surface.
The NV center is becoming a very hot topic in many areas of science, including, Physics, Chemistry, Biology, and Quantum Information. The Degen group has focused on a specific application of the NV center, namely scanning magnetometry. In my time in the group, I focused on building a microscope and studying NV centers in bulk and nanocrystalline diamond. I began by building a confocal microscope which was capable of observing and determine single NV centers. I made measurements on the photon statistics of different defects to determine if they were single emitters or multiple emitters. I also made microwave frequency magnetic measurements to determine the spin properties of single NV centers by measuring their couplings to neighboring paramagnetic nuclei as well as to a spin bath. Through these efforts, I was able to successfully confirm that the microscope was capable of identifying and measuring single NV centers and their properties. Lastly, I worked on the first steps of improving our understanding of NV centers in bulk diamond crystals. The goal of magnetometry involves putting the NV center as close to the diamond surface as possible. I made measurements that were aimed at studying the spin and coherence properties of the NV when it was within 10 nm of the diamond surface. These studies provided insight into the interactions of the NV center with the diamond surface.
The nitrogen-vacancy (NV) center is a defect in the structure of diamond, roughly the size of a single atom, that possesses properties that make it applicable to quantum information processing, high-resolution magnetic resonance imaging, and probing biological systems. When an NV center is excited by green light of wavelength 523 nm, it emits red light of in the range from 600-800 nm tens of nanoseconds later. A confocal microscope can be used to excite and collect emitted photons from NV centers. By detecting the intensity of the emitted red photons, we can determine the quantum state of a single NV center, which is needed to build various quantum computing, sensing and imaging devices. The autocorrelation method is used to detect antibunching in the emission of red photons and ascertain that the observed photons are being emitted from a single NV center. We have built an autocorrelation device that measures, with sub-nanosecond accuracy, the statistical distribution of the arrival times of the red photons emitted from a diamond sample at a photon counter. The device can measure fixed time values with a time resolution of 120 ps FWHM. For uncorrelated sources measured for 120 seconds at the TAC full range of 100 ns, the average counts in each histogram bin were about 0.01% of the predicted value. The autocorrelation device that we have built costs about 10 times less than commercial units used by other NV researchers.
This thesis describes a series of experiments on the control of the optical properties of the nitrogen-vacancy (NV) center in diamond, and on control of the electron and nuclear spin states associated with the NV center. The NV center is a fluorescing atomic defect center in diamond, consisting of a substitutional nitrogen atom adjacent to a vacancy in the diamond carbon lattice. The electron spin of the NV center can be initialized and read out optically, and coherently manipulated with high fidelity even at room temperature. This unique combination of properties has attracted much attention to the NV center in recent years for application in quantum information technologies. The experiments in this work focus on exploiting the intrinsic hybrid nature of the NV center. The NV center forms a hybrid spin register, as its electron spin is always coupled to the nuclear spin of its own nitrogen nucleus, and can furthermore be coupled to additional nuclear carbon-13 spins in the diamond. In addition, the electronic spin state can be mapped onto the state of a photon, in principle allowing long range transmission of quantum information and measurement-based entanglement of distant NV center registers. The long-term goal is to achieve a large scale quantum network where the different constituents each perform the task they are most well suited for: the stable nuclear spins store the quantum information, photons transfer quantum information over long distances, and the fast electron spin interfaces between spin and photon states. For measurement-based entanglement of distant NV centers it is of primary importance to maximize the emission and detection of coherent photons emitted by the NV center. Spontaneous emission can be controlled and enhanced by coupling an emitter to a photonic cavity. Chapters 3, 4, and 5 of this thesis describe experiments aimed at maximizing the coherent photon emission rate of an NV center by coupling the NV center to a photonic crystal cavity. One of the main challenges is to position a single NV center into the nanometer-sized cavity mode. Chapter 3 describes the development of a nanopositioning technique, which allows diamond nanocrystals ~50 nm in size containing single NV centers to be placed at arbitrary locations on a chip, with nanometer precision. By using a sharp etched tungsten tip, individual nanocrystals can be picked up, moved and placed under real-time imaging with an electron microscope. We explicitly demonstrate that the unique optical and spin properties of the NV center are conserved by the nanopositioning process. In chapter 4, we apply the nanopositioning technique to couple single NV centers contained in a diamond nanocrystals to gallium phosphide photonic crystal cavities. These cavities resonate in the visible with high quality factors, and are designed to have the lowest energy mode coincide with the zero-phonon line of the NV center. Efficient coupling is evidenced by a strong enhancement of NV center emission at the cavity wavelength. The high quality factor of a photonic crystal cavity is a result of careful design and fabrication. The introduction of a nanocrystal may therefore be expected to have a detrimental effect on the optical properties of a cavity. In chapter 5 we investigate the effect of a nanocrystal on the optical properties of photonic crystal cavities. Our simulations and measurements show that the effect of a nanocrystal is in fact only minor, a promising result for future work on cavity-QED systems in the solid state and with diamond defect centers in particular. Understanding and mitigating decoherence is a key challenge for quantum science and technology. The main source of decoherence for solid-state spin systems is the uncontrolled spin bath environment. Chapter 6 describes experiments that exploit quantum control of the NV center and recently developed dynamical decoupling techniques to study the properties of the surrounding bath of spins belonging to single substitutional nitrogen atoms. The coherence properties of a single NV center are affected by changes in the state of the bath spins, allowing a single NV center to be used as a probe to detect bath spin resonances and study the quantum dynamics of the spin bath. We use quantum control of the spin bath to extend the dephasing time of the NV center, important for the application of the NV center in DC magnetometry. In chapter 7 we describe the development and implementation of decoherence protected quantum gates for the hybrid spin register formed by the NV center electron spin that is coupled to the nuclear spin of its own nitrogen atom. Electron and nuclear spins evolve and decohere at vastly different rates, making it challenging to use such a hybrid system as a fully functional quantum register. We create a universal set of two-qubit quantum gates by integrating dynamical decoupling techniques into the gate operation. We demonstrate the power of our gate design by implementing for the first time Grover's quantum search algorithm on a solid-state spin register.
The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.
Diamond is unique. Whether mechanical, thermal, electrical or optical, its properties are within the most extreme compared to those of any other material. This, together with the fact that in the last fifty years the synthesis of artificial diamond has become a reality, makes it very attractive for engineering and technological purposes. The range of diamond-based applications is very diverse and, among the others, includes its use in mechanical machining, high-power high-frequency electronics and high transmissivity optics. -- Diamond is also host to a wide variety of crystallographic defects. Appropriately controlled, they can be used to tune the characteristics of the material, but even more interestingly they often possess attractive optical properties on their own. In particular, nitrogen-vacancy (NV) centres in diamond have been the subject of extensive study in the last few years. They possess unique room-temperature optical and spin properties which make them promising systems for solid-state qubits in quantum information technologies and for emerging applications in biotechnology, nanomedicine and high resolution magnetometry, such as drug delivery, fluorescent biomarking and spin imaging. -- This thesis is focused on NV centres in diamond. I first present an extensive review on diamond as a material, describing in detail its physical properties, the methods that have been developed to synthesise it and some of its possible applications. I then move the attention specifically to NV centres in nanodiamonds (NDs), i.e. diamond crystals in the nanometre size range (0-100 nm). They are a potential candidate for emerging technologies including high-resolution magnetometry and biomedical imaging. For these applications, specific material requirements, such as the small size of the diamond nanocrystals and the optical stability of the hosted NV centres, are crucial. The NV stability with respect to the nanodiamond size and surface is the central theme of this thesis. I analyse the optical behaviour of NV centres in nanodiamond while varying a number of key parameters such as size, surface termination and diamond origin. Based on the measurements, I conclude whether the nanodiamond size and the NV surface proximity are factors that must be taken into consideration in order to control the material and realise nanotechnologies based on NV centres in nanodiamonds.
The NV defect center in diamond forms a pseudo-atomic quantum system with discreet optically excitable transitions between ground and excited states in the gap between valence and conduction bands, making the NV center a deep-level defect center in diamond. For the negatively charged NV center (NV-), both the ground and excited states are spin triplets (S=1) and coupling between optical and spin states provides unique opportunities for optical detection of magnetic resonance (ODMR) and quantum metrology under ambient conditions. As an atomically sized point defect that is stable in single nanodiamonds as small as a few nanometers, the NV center enables spin based imaging of temperature, electric fields, magnetic fields and mechanical strain with nanoscale spatial resolution. Made of carbon, nanodiamonds are also ideal nanoparticles for use in biological systems, exhibiting extremely low cytotoxicity, no photo bleaching and exceptional contrast in transmission electron and light microscopy. With the ability to act as both a passive, non perturbing sensor (e.g. a diamagnetic material used for sensing magnetic fields) and a connection point for two way, direct coupling of far field optics to NV− spins and indirectly to the highly localized neighborhood of atoms, electronic states and phonon modes in the local vicinity, NV diamond provides a route to nanoscale field sensing and spin based optical microscopy. These sensors are also stable in nanodiamonds. For nanoparticles, the reduction in particle diameter dramatically enhances the proportion of the material that is surface exposed, enhancing any surface related properties. Nitrogen Vacancy centers in nanodiamonds provide another example of material properties that vary with particle size. In chapter 5, evidence that modulation of nanodiamonds fluorescent emissions by electrical perturbations in their surrouding environment allows transduction of local electrodynamics into a far field optical signal capable of mapping action potentials in cardiomyocytes in presented. The unifying theme for all of the work presented in this dissertation is to enable the use of magnetic resonance signals and interactions for imaging and sensing in previously inaccessible regimes. The specific focus is on methods and techniques to enable nanoscale physical sensing and functional imaging in live tissues, with the ultimate aim to lay the predicate for the combination of both without compromise.
The recent decade has witnessed exciting developments in quantum science and technology. Quantum sensing is a rapidly growing branch, which exploits the fragility of quantum systems to detect small external signals. The extreme control at the single-atom level and the remarkably long coherence time of engineered quantum systems enable unprecedented sensitivity and precision, beating the performance of classical techniques. The nitrogen-vacancy (NV) center in diamond is one of the most promising quantum sensors. Its unique advantages have attracted considerable attention, including a long spin coherence time throughout a broad temperature range, nanoscale resolution limited by the sensor-sample distance, convenient optical control of its spin states and remarkably versatile sensing capabilities. Its properties are well studied under a bias magnetic field oriented along its quantization axis. However, its sensing capabilities in the presence of an off-axis magnetic field are much less explored. My research aims to unlock the full potential of NV quantum sensor by developing new sensing modalities under a magnetic field acting perpendicular to the NV axis, and furthermore, integrating them into a scanning probe microscope. In this dissertation, I will report our progress toward building a scanning NV multimodal quantum imaging platform, which will open up exciting opportunities in measuring nanoscale phenomena. The first chapter provides an introduction to the background of quantum sensing with NV centers, followed by a discussion on its basic properties and established sensing techniques. The second and third chapters are dedicated to two experiments performed under a perpendicular magnetic field where traditional NV magnetometry based on the Zeeman effect fails. In the second chapter, I will introduce a new sensing strategy that uses the entanglement between the electron and nuclear spins to restore the magnetic field sensitivity under this unfavored condition. This allows us to sense small changes in the magnetic field angle relative to the NV axis, and to detect anisotropic magnetic noise in the local environment. In the third chapter, I will present our latest development of scanning NV electrometry, where a single NV at the apex of a diamond scanning probe images external alternating (AC) and direct (DC) electric fields with sub-100 nm resolution. In the last chapter, I will discuss our efforts on four experiments that were left unfinished. I will present the results we have achieved, analyze the challenges that we faced and propose potential solutions to overcome them.